>>> F1 - Modification <<< - GSM-Forum

RNC_EBM · 07-21-2007, 10:15

This MODIFICATION WORKS ON 8pins CABLE FOR UFSx & JAF.

Addtional: RX2 Line added also.

br

RNC_EBM

http://rncebm.homestead.com/
http://gsmph.com/forum/vbb/forum_index.php?page=home
http://www.gsmgadget.org/forum/index.php
http://www.gsmtools.biz/forum/
http:///vbb/index.php

wgmmmx · 07-21-2007, 11:26

Tried Tested And Work Without Problem !! !! !! Cool Very Thanks For This Info Cool More Then Cool Modification

Flashing log from 5700 flashing without converter cable after modification:
Flashing rm230_03.27_prd_core.fpsx ...
Booting Phone...
RAP3 ASIC ID:000000010000022600010006400C...
RAP3 EM ASIC ID:00000295
RAP3 EM ASIC ID:00000B21
RAP3 PUBLIC ID:18F0000C494F00587B502C1B0AD7...
RAP3 ASIC MODE:00
RAP3 HASH:9A28E119033B91D14D22838C86D0...
RAP3 ROM ID:F2C6EBADC86E6189
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Reading Keys...Done.
Phones booting completed in 0 min, 8 sec.
Flashing MCU area...Done.
Flashing completed in 0 min, 0 sec.
Phone Restarted.
Flashing rm230_03.27_prd_uda_erase.fpsx ...
Booting Phone...
RAP3 ASIC ID:000000010000022600010006400C...
RAP3 EM ASIC ID:00000295
RAP3 EM ASIC ID:00000B21
RAP3 PUBLIC ID:18F0000C494F00587B502C1B0AD7...
RAP3 ASIC MODE:00
RAP3 HASH:9A28E119033B91D14D22838C86D0...
RAP3 ROM ID:F2C6EBADC86E6189
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Phones booting completed in 0 min, 7 sec.
Erasing CP area...Done.
Erasing completed in 0 min, 1 sec.
Flashing CP area...Done.
Flashing completed in 0 min, 0 sec.
Phone Restarted.
Flashing rm230_03.27_prd_v06_01_euro3.fpsx ...
Booting Phone...
RAP3 ASIC ID:000000010000022600010006400C...
RAP3 EM ASIC ID:00000295
RAP3 EM ASIC ID:00000B21
RAP3 PUBLIC ID:18F0000C494F00587B502C1B0AD7...
RAP3 ASIC MODE:00
RAP3 HASH:9A28E119033B91D14D22838C86D0...
RAP3 ROM ID:F2C6EBADC86E6189
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Phones booting completed in 0 min, 7 sec.
Erasing PPM area...Done.
Erasing completed in 0 min, 2 sec.
Flashing PPM area...Done.
Flashing completed in 1 min, 36 sec.
Phone Restarted.
NSS: Flashing complete.
NSS: Total time: 2 min 1 sec.
NSS: *********** AFP ***********
NSS: Scanning product via FBUS...Done.
NSS: Detected: RM-230
NSS: Uploading Product Profile...Skipped.
NSS: Setting to Full Factory.....Done.
NSS: --> AFP complete.

Very cool

I use Jaf 7 pin cable

***stanner_austin*** · 07-21-2007, 11:36

@RNC_EBM
UFS DON'T USE RX2..so ufs cable was working before now need jaf cable after this modification.
its was jaf which is first who maked rx2 flashing abilitiy..

RNC_EBM · 07-21-2007, 11:53

Quote:

Originally Posted by stanner_austin

@RNC_EBM
UFS DON'T USE RX2..so ufs cable was working before now need jaf cable after this modification.
its was jaf which is first who maked rx2 flashing abilitiy..

my UFSx (BB5)cable was already modified to use RX2.

all my UFSx BB5 cable are all modified with 7pins and 7pins cable work also with UFSx+HWK.

br

RNC_EBM.

***stanner_austin*** · 07-21-2007, 11:56

Quote:

Originally Posted by RNC_EBM

my UFSx (BB5)cable was already modified to use RX2.

all my UFSx BB5 cable are all modified with 7pins and 7pins cable work also with UFSx+HWK.

br

RNC_EBM.

you have modifiyed...
ufs don't suppliy it ..ufs come with 5pin bb5 cable for extra vpp they use adaptor so 7 pin cable use in ufs do same as 5pin cable + vpp adaptor.

have a nice day...

in F1 after modification now have to use BB5 JAF CABLE 7 PIN..

wgmmmx · 07-21-2007, 13:02

Flashing 3220

work without problems

FLS: Preparing MCU file.
FLS: Parsing MCU file.
FLS: MCU flashing - rh37__05.900
FLS: Sending bootloader: u_2nd.fia
FLS: Asic: 0x1130
FLS: Dev0: 0x00EC22F8, Samsung K8S2815ET
FLS: Base: 0x01000000, Sector Size: 0x10
FLS: Sending Algorithm: u_amd.fia
FLS: Performing Authentification.
FLS: E_DIE ID: 0x845F30A5CC4D405C21864D96AA
FLS: Area: 01000000-0101FFFF - Erasing
FLS: Area Erased.
FLS: Area: 01020000-0181FFFF - Erasing
FLS: Area Erased.
FLS: Area: 01E60000-01FDFFFF - Erasing
FLS: Area Erased.
FLS: Writing MCU file.
FLS: Restart phone.
FLS: Mcu flashing took: 5 min 13 sec
FLS: Preparing CP file...
FLS: CP flashing - rh37__05.90.image_era
FLS: Sending bootloader: u_2nd.fia
FLS: Asic: 0x1130
FLS: Dev0: 0x00EC22F8, Samsung K8S2815ET
FLS: Base: 0x01000000, Sector Size: 0x10
FLS: Sending Algorithm: u_amd.fia
FLS: Parsing CP file...
FLS: Area: 01A40000-01E5FFFF - Erasing
FLS: Area Erased.
FLS: Writing Content file...
FLS: Restart phone...
FLS: Content flashing took: 1 min 54 sec
NSS: Scanning product via FBUS...Done.
NSS: Extracting...Done.
FLS: Preparing PPM file...
FLS: PPM flashing - rh37__05.90b
FLS: Sending bootloader: u_2nd.fia
FLS: Asic: 0x1130
FLS: Dev0: 0x00EC22F8, Samsung K8S2815ET
FLS: Base: 0x01000000, Sector Size: 0x10
FLS: Sending Algorithm: u_amd.fia
FLS: Performing Authentification.
FLS: E_DIE ID: 0x84952DC53A3B5E60651318B800
FLS: Parsing PPM file...
FLS: Area: 01820000-01A3FFFF - Erasing
FLS: Area Erased.
FLS: Writing PPM file...
FLS: Restart phone...
FLS: Done.
FLS: PPM flash took: 1 min 5 sec
FLS: Total time: 8 min 12 sec
NSS: *********** AFP ***********
NSS: Scanning product via FBUS...Done.
NSS: Resetting PPC settings......Done.
NSS: Uploading Product Profile...Done.
NSS: Setting to Full Factory.....Done.
NSS: --> AFP complete.

RNC_EBM · 07-21-2007, 14:03

CORRECTION:

VBAT LINE NOT VPP LINE

IMAGE CORRECTED.

br

RNC_EBM

RNC_EBM · 07-21-2007, 14:23

FOR RX2 Line INFO at NSS Software

Original LINK

THANKS FEDERALONE TEAM.

br

RNC_EBM

Vansy · 07-21-2007, 17:02

But after modified how about dct4 phone flashing ? normal woring ?

wgmmmx · 07-21-2007, 23:14

after modification you can work with dct4 without problem like before miodification with adapter

bye

damabib · 07-22-2007, 07:54

Good Detectives Reaally Helps

Vansy · 07-22-2007, 14:08

Tested with N91 and 6100 OK but 1110i/1112 cannot power on, hang erasing.Tested with normal working phones

wgmmmx · 07-22-2007, 17:38

Do you do WIRE like is write under board from Vbat to rx2 ?? ?? Becouse I got the same like you before do wire. bye

Vansy · 07-22-2007, 17:54

What is deferebce betwin Under board & on board ? Just cut one track and connect 2 jumper .

wgmmmx · 07-22-2007, 23:25

There where I give white arena must be wire not only this 2 what you see but this too on picture is write but no all see this !! !! !!

07-21-2007, 10:15	#1 (permalink)
RNC_EBM No Life Poster Join Date: Dec 2004 Location: La Union Philippines Posts: 5,102 Member: 101860 Status: Offline Sonork: 100.1582168 100.77603 Thanks: 1,797 Thanked 5,552 Times in 1,438 Posts	>>> F1 - Modification <<< This MODIFICATION WORKS ON 8pins CABLE FOR UFSx & JAF. Addtional: RX2 Line added also. br RNC_EBM http://rncebm.homestead.com/ http://gsmph.com/forum/vbb/forum_index.php?page=home http://www.gsmgadget.org/forum/index.php http://www.gsmtools.biz/forum/ http:///vbb/index.php

07-21-2007, 13:02	#6 (permalink)
wgmmmx Banned Join Date: Apr 2005 Age: 31 Posts: 2,106 Member: 137474 Status: Offline Sonork: 100.109924 Thanks: 866 Thanked 449 Times in 173 Posts	dct4 phone flashing and unlocking work too after modification :) Flashing 3220 work without problems FLS: Preparing MCU file. FLS: Parsing MCU file. FLS: MCU flashing - rh37__05.900 FLS: Sending bootloader: u_2nd.fia FLS: Asic: 0x1130 FLS: Dev0: 0x00EC22F8, Samsung K8S2815ET FLS: Base: 0x01000000, Sector Size: 0x10 FLS: Sending Algorithm: u_amd.fia FLS: Performing Authentification. FLS: E_DIE ID: 0x845F30A5CC4D405C21864D96AA FLS: Area: 01000000-0101FFFF - Erasing FLS: Area Erased. FLS: Area: 01020000-0181FFFF - Erasing FLS: Area Erased. FLS: Area: 01E60000-01FDFFFF - Erasing FLS: Area Erased. FLS: Writing MCU file. FLS: Restart phone. FLS: Mcu flashing took: 5 min 13 sec FLS: Preparing CP file... FLS: CP flashing - rh37__05.90.image_era FLS: Sending bootloader: u_2nd.fia FLS: Asic: 0x1130 FLS: Dev0: 0x00EC22F8, Samsung K8S2815ET FLS: Base: 0x01000000, Sector Size: 0x10 FLS: Sending Algorithm: u_amd.fia FLS: Parsing CP file... FLS: Area: 01A40000-01E5FFFF - Erasing FLS: Area Erased. FLS: Writing Content file... FLS: Restart phone... FLS: Content flashing took: 1 min 54 sec NSS: Scanning product via FBUS...Done. NSS: Extracting...Done. FLS: Preparing PPM file... FLS: PPM flashing - rh37__05.90b FLS: Sending bootloader: u_2nd.fia FLS: Asic: 0x1130 FLS: Dev0: 0x00EC22F8, Samsung K8S2815ET FLS: Base: 0x01000000, Sector Size: 0x10 FLS: Sending Algorithm: u_amd.fia FLS: Performing Authentification. FLS: E_DIE ID: 0x84952DC53A3B5E60651318B800 FLS: Parsing PPM file... FLS: Area: 01820000-01A3FFFF - Erasing FLS: Area Erased. FLS: Writing PPM file... FLS: Restart phone... FLS: Done. FLS: PPM flash took: 1 min 5 sec FLS: Total time: 8 min 12 sec NSS: ********* AFP ********* NSS: Scanning product via FBUS...Done. NSS: Resetting PPC settings......Done. NSS: Uploading Product Profile...Done. NSS: Setting to Full Factory.....Done. NSS: --> AFP complete.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
>>> F1 - BB5 RPL, NEED for TEST <<<	RNC_EBM	Federal One	6	07-01-2007 16:52
>>> F1 - Firmware Update ERROR <<<	RNC_EBM	Federal One	7	06-30-2007 15:14
>>> F1 Cable Modification <<<	RNC_EBM	Federal One	3	02-07-2007 19:05
>>> F1 - DCT4Plus Update <<<	RNC_EBM	Federal One	9	01-19-2007 19:38
>>> F1 - 7710 Can't Flash ADL <<<	RNC_EBM	Federal One	3	10-29-2006 06:11

07-21-2007, 11:26	#2 (permalink)
wgmmmx Banned Join Date: Apr 2005 Age: 31 Posts: 2,106 Member: 137474 Status: Offline Sonork: 100.109924 Thanks: 866 Thanked 449 Times in 173 Posts	Tried Tested And Work Without Problem !! !! !! Cool Very Thanks For This Info Cool More Then Cool Modification Flashing log from 5700 flashing without converter cable after modification: Flashing rm230_03.27_prd_core.fpsx ... Booting Phone... RAP3 ASIC ID:000000010000022600010006400C... RAP3 EM ASIC ID:00000295 RAP3 EM ASIC ID:00000B21 RAP3 PUBLIC ID:18F0000C494F00587B502C1B0AD7... RAP3 ASIC MODE:00 RAP3 HASH:9A28E119033B91D14D22838C86D0... RAP3 ROM ID:F2C6EBADC86E6189 Sending RAP3 Bootloader...Done. Sending RAP3 Algorithm...Done. Reading Keys...Done. Phones booting completed in 0 min, 8 sec. Flashing MCU area...Done. Flashing completed in 0 min, 0 sec. Phone Restarted. Flashing rm230_03.27_prd_uda_erase.fpsx ... Booting Phone... RAP3 ASIC ID:000000010000022600010006400C... RAP3 EM ASIC ID:00000295 RAP3 EM ASIC ID:00000B21 RAP3 PUBLIC ID:18F0000C494F00587B502C1B0AD7... RAP3 ASIC MODE:00 RAP3 HASH:9A28E119033B91D14D22838C86D0... RAP3 ROM ID:F2C6EBADC86E6189 Sending RAP3 Bootloader...Done. Sending RAP3 Algorithm...Done. Phones booting completed in 0 min, 7 sec. Erasing CP area...Done. Erasing completed in 0 min, 1 sec. Flashing CP area...Done. Flashing completed in 0 min, 0 sec. Phone Restarted. Flashing rm230_03.27_prd_v06_01_euro3.fpsx ... Booting Phone... RAP3 ASIC ID:000000010000022600010006400C... RAP3 EM ASIC ID:00000295 RAP3 EM ASIC ID:00000B21 RAP3 PUBLIC ID:18F0000C494F00587B502C1B0AD7... RAP3 ASIC MODE:00 RAP3 HASH:9A28E119033B91D14D22838C86D0... RAP3 ROM ID:F2C6EBADC86E6189 Sending RAP3 Bootloader...Done. Sending RAP3 Algorithm...Done. Phones booting completed in 0 min, 7 sec. Erasing PPM area...Done. Erasing completed in 0 min, 2 sec. Flashing PPM area...Done. Flashing completed in 1 min, 36 sec. Phone Restarted. NSS: Flashing complete. NSS: Total time: 2 min 1 sec. NSS: ********* AFP ********* NSS: Scanning product via FBUS...Done. NSS: Detected: RM-230 NSS: Uploading Product Profile...Skipped. NSS: Setting to Full Factory.....Done. NSS: --> AFP complete. Very cool I use Jaf 7 pin cable

07-21-2007, 11:36	#3 (permalink)
*stanner_austin* Super Moderator Join Date: Jan 2004 Location: INDIA,Gujarat,Surat Age: 28 Posts: 5,053 Member: 49752 Status: Offline Sonork: 100.112446 Thanks: 104 Thanked 4,009 Times in 597 Posts	@RNC_EBM UFS DON'T USE RX2..so ufs cable was working before now need jaf cable after this modification. its was jaf which is first who maked rx2 flashing abilitiy..

07-21-2007, 14:03	#7 (permalink)
RNC_EBM No Life Poster Join Date: Dec 2004 Location: La Union Philippines Posts: 5,102 Member: 101860 Status: Offline Sonork: 100.1582168 100.77603 Thanks: 1,797 Thanked 5,552 Times in 1,438 Posts	CORRECTION: VBAT LINE NOT VPP LINE *IMAGE CORRECTED*. br RNC_EBM

07-21-2007, 14:23	#8 (permalink)
RNC_EBM No Life Poster Join Date: Dec 2004 Location: La Union Philippines Posts: 5,102 Member: 101860 Status: Offline Sonork: 100.1582168 100.77603 Thanks: 1,797 Thanked 5,552 Times in 1,438 Posts	FOR RX2 Line INFO at NSS Software Original LINK *THANKS FEDERALONE TEAM.* br RNC_EBM

07-21-2007, 17:02	#9 (permalink)
Vansy No Life Poster Join Date: Sep 2003 Location: Cambodia Posts: 1,548 Member: 39069 Status: Offline Sonork: 100.1606677 Thanks: 97 Thanked 211 Times in 123 Posts	But after modified how about dct4 phone flashing ? normal woring ?

07-21-2007, 23:14	#10 (permalink)
wgmmmx Banned Join Date: Apr 2005 Age: 31 Posts: 2,106 Member: 137474 Status: Offline Sonork: 100.109924 Thanks: 866 Thanked 449 Times in 173 Posts	after modification you can work with dct4 without problem like before miodification with adapter bye

07-22-2007, 07:54	#11 (permalink)
damabib No Life Poster Join Date: Jan 2005 Location: EVERYWHERE U GO Age: 35 Posts: 4,772 Member: 106026 Status: Offline Sonork: 100.77890 Thanks: 127 Thanked 125 Times in 98 Posts	Good Detectives Reaally Helps

07-22-2007, 14:08	#12 (permalink)
Vansy No Life Poster Join Date: Sep 2003 Location: Cambodia Posts: 1,548 Member: 39069 Status: Offline Sonork: 100.1606677 Thanks: 97 Thanked 211 Times in 123 Posts	Tested with N91 and 6100 OK but 1110i/1112 cannot power on, hang erasing.Tested with normal working phones

07-22-2007, 17:38	#13 (permalink)
wgmmmx Banned Join Date: Apr 2005 Age: 31 Posts: 2,106 Member: 137474 Status: Offline Sonork: 100.109924 Thanks: 866 Thanked 449 Times in 173 Posts	Do you do WIRE like is write under board from Vbat to rx2 ?? ?? Becouse I got the same like you before do wire. bye

07-22-2007, 17:54	#14 (permalink)
Vansy No Life Poster Join Date: Sep 2003 Location: Cambodia Posts: 1,548 Member: 39069 Status: Offline Sonork: 100.1606677 Thanks: 97 Thanked 211 Times in 123 Posts	What is deferebce betwin Under board & on board ? Just cut one track and connect 2 jumper .