NSS version 1.0.38.12 comments - GSM-Forum

Freestyler2000 · 07-13-2007, 13:55

Hi,

Please post here comments about the latest NSS 1.0.38.12

Best regards
Daniel

RNC_EBM · 07-13-2007, 14:34

Upgrade log from F1UpgradeUtility

BEFORE:

Quote:

Reading F1 details...
->SN: 10xxx, HW: 10.08, Build: 03.10.01.24
F1 device is in boot mode.
Device is ready for upgrade.

UPDATING:

Quote:

Reading F1 details...
->SN: 10xxx, HW: 10.08, Build: 03.10.01.24
F1 device is in boot mode.
Device is ready for upgrade.
-------------------------------------------
Connecting to server...Done.
Nss Server Version 0.0.0.7
Getting module version...Done.
F1Module Version 0.0.0.1
Calculating file...Done.
Receiving file...Done.
Disconnecting from server...Done.
-------------------------------------------
Loading Firmware...Done.
Programing Done.

AFTER:

Quote:

Reading F1 details...
->SN: 10xxx, HW: 10.08, Build: 03.10.01.26
F1 device is in boot mode.
Device is ready for upgrade.

NSS 1.0.38.12 SOFTWARE LOG

Quote:

Checking Framework...Done.
->..pdginterfc.dll version: 1.0.479
->....pdg4fbus.dll version: 1.0.1641
->....pdg4mbus.dll version: 1.0.106
->.....pdg4fls.dll version: 1.0.1164
->....pdg4flsc.dll version: 1.0.0.58
->pdgphonebook.dll version: 1.0.189
->.bb5usbflash.dll version: 1.0.0.42
Reading USB device...Done.
->SN: 10007, HW: 10.08, Build: 03.10.01.26
->Extended Info not available.
Testing Interfaces...
->FBUS UART...Supported.
->MBUS UART...Supported.
->Flash Bus...Supported.
Testing Directories...
->DCT4 Loaders Dir('Flash')......Found.
-->124 file(s) found.
-->Loaders version: v. 7.16.22.27399 for
->ADSP Loaders Dir('FlashUsb')...Found.
-->10 file(s) found.
->DCT3 Loaders Dir('fls1sup')....Found.
-->30 file(s) found.
-->Loaders version: v. 2.06 for DCT3 AMS
->Products Dir('products').......Found.
-->182 product(s) found.

THANKS FOR THE NICE UPDATE.

br

RNC_EBM

Vansy · 07-13-2007, 15:01

This version support n95 ? Today I test flash n93i succesfull with NSS version 1.0.38.11 but after that phone blink. i hope new version is great
BR.

Freestyler2000 · 07-13-2007, 15:36

Quote:

Originally Posted by Vansy

This version support n95 ? Today I test flash n93i succesfull with NSS version 1.0.38.11 but after that phone blink. i hope new version is great
BR.

I have tested it on N95

Here is the log file

Flashing RM-159_11.0.026_PR.C0R ...
Booting Phone...
APE ASIC ID:24200705
APE ASIC MODE:00
APE PUBLIC ID

702918F62F7A19961DC9758FE19...
APE HASH:BA8710A7E1CD5A2909B9A875DB27...
RAP3 ASIC ID:000000010000022600010006400C...
RAP3 EM ASIC ID:00000295
RAP3 EM ASIC ID:00000B22
RAP3 PUBLIC ID:07D0000B6C5B0058B0F45693B8DF...
RAP3 ASIC MODE:00
RAP3 HASH:CAEEBB65D3C48E6DC73B49DC5063...
RAP3 ROM ID:F2C6EBADC86E6189
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Sending APE Bootloader...Done.
Sending APE Algorithm...Done.
Format Partition...Done.
Reading Keys...Done.
Phones booting completed in 0 min, 17 sec.
Erasing MCU area...Done.
Erasing completed in 0 min, 50 sec.
Flashing MCU area...Done.
Flashing completed in 4 min, 2 sec.
Phone Restarted.
Flashing RM159_10.0.010_022_U01_uda.fpsx ...
Booting Phone...
APE ASIC ID:24200705
APE ASIC MODE:00
APE PUBLIC ID

702918F62F7A19961DC9758FE19...
APE HASH:BA8710A7E1CD5A2909B9A875DB27...
RAP3 ASIC ID:000000010000022600010006400C...
RAP3 EM ASIC ID:00000295
RAP3 EM ASIC ID:00000B22
RAP3 PUBLIC ID:07D0000B6C5B0058B0F45693B8DF...
RAP3 ASIC MODE:00
RAP3 HASH:CAEEBB65D3C48E6DC73B49DC5063...
RAP3 ROM ID:F2C6EBADC86E6189
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Sending APE Bootloader...Done.
Sending APE Algorithm...Done.
Phones booting completed in 0 min, 7 sec.
Erasing CP area...Done.
Erasing completed in 0 min, 1 sec.
Flashing CP area...Done.
Flashing completed in 2 min, 12 sec.
Phone Restarted.
Flashing RM-159_11.0.026_PR.v03 ...
Booting Phone...
APE ASIC ID:24200705
APE ASIC MODE:00
APE PUBLIC ID

702918F62F7A19961DC9758FE19...
APE HASH:BA8710A7E1CD5A2909B9A875DB27...
RAP3 ASIC ID:000000010000022600010006400C...
RAP3 EM ASIC ID:00000295
RAP3 EM ASIC ID:00000B22
RAP3 PUBLIC ID:07D0000B6C5B0058B0F45693B8DF...
RAP3 ASIC MODE:00
RAP3 HASH:CAEEBB65D3C48E6DC73B49DC5063...
RAP3 ROM ID:F2C6EBADC86E6189
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Sending APE Bootloader...Done.
Sending APE Algorithm...Done.
Phones booting completed in 0 min, 8 sec.
Erasing PPM area...Done.
Erasing completed in 0 min, 1 sec.
Flashing PPM area...Done.
Flashing completed in 0 min, 53 sec.
Phone Restarted.
NSS: Flashing complete.
NSS: Total time: 8 min 31 sec.
NSS: *********** AFP ***********
NSS: Scanning product via FBUS...Done.
NSS: Detected: RM-159
NSS: Uploading Product Profile...Skipped.
NSS: Changing mode to Normal.....Done.
NSS: --> AFP complete.

Best regards
Daniel

bestncheap · 07-13-2007, 17:16

n95 use 5pin cable or 7pin cable?

br

bnc

arunamobile · 07-13-2007, 17:31

6310i flashing error yet not solved sir please first try to clear all bugs in dct4 and wd2 because we use this box but no meaning maximum phone dct4 not dont and gives error

FLS: Preparing MCU file.
FLS: Parsing MCU file.
FLS: MCU flashing - npl110_7.000
FLS: Error!

i alreaddy post more then five post about deferent models gives same error but no reply by developer again i give models details for which gives same error

6600
nagae-qd
7610
6310i
1600

Bph&co · 07-13-2007, 17:34

Quote:

Originally Posted by arunamobile

6310i flashing error yet not solved sir please first try to clear all bugs in dct4 and wd2 because we use this box but no meaning maximum phone dct4 not dont and gives error

FLS: Preparing MCU file.
FLS: Parsing MCU file.
FLS: MCU flashing - npl110_7.000
FLS: Error!

i alreaddy post more then five post about deferent models gives same error but no reply by developer again i give models details for which gives same error

6600
nagae-qd
7610
6310i
1600

Hi,

Just post a debug log. But most probably you have to untick 'Use SafeFlash" Option.

BR

upgrader · 07-13-2007, 18:24

hi sir do we have to modify our 10 pins cable converter in order to flash bb5 phones? need your clarification.

br

Freestyler2000 · 07-13-2007, 18:45

Hi,

http://forum.gsmhosting.com/vbb/show...5&postcount=14

Here i have shown what needs to be modified on the converter.

Then you will be able to use JAF 7 pin cables.

The latest version of the loaders will not work without RX2

5 pin cables do not use RX2
7 pin cables use RX2

Best regards
Daniel

xpmobile · 07-13-2007, 19:48

Quote:

Originally Posted by arunamobile

6310i flashing error yet not solved sir please first try to clear all bugs in dct4 and wd2 because we use this box but no meaning maximum phone dct4 not dont and gives error

FLS: Preparing MCU file.
FLS: Parsing MCU file.
FLS: MCU flashing - npl110_7.000
FLS: Error!

i alreaddy post more then five post about deferent models gives same error but no reply by developer again i give models details for which gives same error

6600
nagae-qd
7610
6310i
1600

Hi,
I have tested on flashing with N-Gage-QD (basica, so far no problem at all. For your error. Only two possible.
1) One which is already mention Untick "Safe Flash"
2) Cable without correct resistor in it. Check F1 site for help.

Check this flashing:
FLS: Preparing MCU file.
FLS: Parsing MCU file.
FLS: MCU flashing - rh2942.4c4
FLS: Sending bootloader: w3_2nd.fia
FLS: Asic: 0x1081
FLS: Dev0: 0x00EC22F8, Samsung K8S2815ET
FLS: Base: 0x00000000, Sector Size: 0x10
FLS: Dev1: 0x00EC22FA, Samsung K8S6415ET
FLS: Base: 0x02000000, Sector Size: 0x10
FLS: Sending Algorithm: w3_amd.fia
FLS: Performing Authentification.
FLS: E_DIE ID: 0x84ACCDC2EA1660B842BC977979
FLS: Area: 00000000-0000FFFF - Erasing
FLS: Area Erased.
FLS: Area: 00010000-00FEFFFF - Erasing
FLS: Area Erased.
FLS: Area: 02000000-027FFFFF - Erasing
FLS: Area Erased.
FLS: Writing MCU file.

Best Regards
Alan Tan

arunamobile · 07-14-2007, 06:58

Quote:

Originally Posted by xpmobile

Hi,
I have tested on flashing with N-Gage-QD (basica, so far no problem at all. For your error. Only two possible.
1) One which is already mention Untick "Safe Flash"
2) Cable without correct resistor in it. Check F1 site for help.

Check this flashing:
FLS: Preparing MCU file.
FLS: Parsing MCU file.
FLS: MCU flashing - rh2942.4c4
FLS: Sending bootloader: w3_2nd.fia
FLS: Asic: 0x1081
FLS: Dev0: 0x00EC22F8, Samsung K8S2815ET
FLS: Base: 0x00000000, Sector Size: 0x10
FLS: Dev1: 0x00EC22FA, Samsung K8S6415ET
FLS: Base: 0x02000000, Sector Size: 0x10
FLS: Sending Algorithm: w3_amd.fia
FLS: Performing Authentification.
FLS: E_DIE ID: 0x84ACCDC2EA1660B842BC977979
FLS: Area: 00000000-0000FFFF - Erasing
FLS: Area Erased.
FLS: Area: 00010000-00FEFFFF - Erasing
FLS: Area Erased.
FLS: Area: 02000000-027FFFFF - Erasing
FLS: Area Erased.
FLS: Writing MCU file.

Best Regards
Alan Tan

sir i attach screen shot of error i checked all cable digram and i am able to flash rh-29 but in rh-47 this error come please see image and reply me i also untick to safe flash mode

thanking you,
for,
aruna export
india

mobilegsm30 · 07-14-2007, 07:16

Thanks good update.
want to know how many rpl files with box and how to get user pass for support files site. i have sent mail my box serial number with pic to support@ federalone.org after three days no reply

arunamobile · 07-14-2007, 13:38

sir i attach screen shot of error when flashing 6233 before this nre release 6233 flashing works perfect now dead support for this models please do needful

Freestyler2000 · 07-14-2007, 13:41

Quote:

Originally Posted by arunamobile

sir i attach screen shot of error when flashing 6233 before this nre release 6233 flashing works perfect now dead support for this models please do needful

Hi,

I have personally tested the 6233 and it works

Please install the latest loaders - 7.16

Best regards
Daniel

arunamobile · 07-14-2007, 14:12

Quote:

Originally Posted by Freestyler2000

Hi,

I have personally tested the 6233 and it works

Please install the latest loaders - 7.16

Best regards
Daniel

i am also using lates loader 7.16 but i face this problem so i post screen shot then i try to flash flash with universalbox then i found that this phone have bad flash chip so this is hardware problem please try to specifiy fault in f1 software

07-13-2007, 13:55	#1 (permalink)
Freestyler2000 No Life Poster Join Date: Dec 2000 Location: UK Posts: 724 Member: 2868 Status: Offline Thanks Meter: 514	NSS version 1.0.38.12 comments Hi, Please post here comments about the latest NSS 1.0.38.12 Best regards Daniel

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nss V1.0.38.12	468492DF	Federal One	1	07-17-2007 07:23
Comments about new version - NSS 1.0.38.8	Freestyler2000	Federal One	3	02-02-2007 16:10
NSS.exe 1.0.38.3 Beta Release questions and answers	Freestyler2000	Federal One	19	11-27-2006 19:12
NSS.exe 1.0.38.1 Beta Release questions and answers	Freestyler2000	Federal One	6	10-17-2006 15:58
NSS.exe 1.0.38.0 Final Release questions and answers	Freestyler2000	Federal One	10	10-02-2006 08:20

07-13-2007, 15:01	#3 (permalink)
Vansy Banned Join Date: Sep 2003 Location: Cambodia Posts: 1,522 Member: 39069 Status: Offline Sonork: 100.1606677 Thanks Meter: 190	This version support n95 ? Today I test flash n93i succesfull with NSS version 1.0.38.11 but after that phone blink. i hope new version is great BR.

07-13-2007, 17:16	#5 (permalink)
bestncheap No Life Poster Join Date: Jan 2003 Location: bestncheap Age: 43 Posts: 1,808 Member: 19785 Status: Offline Thanks Meter: 1,242	n95 use 5pin cable or 7pin cable? br bnc

07-13-2007, 17:31	#6 (permalink)
arunamobile No Life Poster Join Date: Mar 2005 Location: India Age: 46 Posts: 563 Member: 129258 Status: Offline Thanks Meter: 105	6310i flashing error yet not solved sir please first try to clear all bugs in dct4 and wd2 because we use this box but no meaning maximum phone dct4 not dont and gives error FLS: Preparing MCU file. FLS: Parsing MCU file. FLS: MCU flashing - npl110_7.000 FLS: Error! i alreaddy post more then five post about deferent models gives same error but no reply by developer again i give models details for which gives same error 6600 nagae-qd 7610 6310i 1600

07-13-2007, 18:24	#8 (permalink)
upgrader Freak Poster Join Date: Jan 2006 Posts: 313 Member: 225818 Status: Offline Thanks Meter: 3	hi sir do we have to modify our 10 pins cable converter in order to flash bb5 phones? need your clarification. br

07-13-2007, 18:45	#9 (permalink)
Freestyler2000 No Life Poster Join Date: Dec 2000 Location: UK Posts: 724 Member: 2868 Status: Offline Thanks Meter: 514	Hi, http://forum.gsmhosting.com/vbb/show...5&postcount=14 Here i have shown what needs to be modified on the converter. Then you will be able to use JAF 7 pin cables. The latest version of the loaders will not work without RX2 5 pin cables do not use RX2 7 pin cables use RX2 Best regards Daniel

07-14-2007, 07:16	#12 (permalink)
mobilegsm30 No Life Poster Join Date: Mar 2005 Age: 44 Posts: 865 Member: 129486 Status: Offline Thanks Meter: 66	Thanks good update. want to know how many rpl files with box and how to get user pass for support files site. i have sent mail my box serial number with pic to support@ federalone.org after three days no reply