unable to set the phone in dct4 flash mode - tx line remain high - GSM-Forum

Egypt Unlocker · 11-03-2003, 05:11

when i tried to flash a 6800 or 7250i - i got this damn Msg
" unable to set the phone in dct4 flash mode - tx line remain high"

althought i reflash 7210 and 8310 and 6510

can anyone help me ??

Sandman · 11-03-2003, 07:56

what happened to the phone???is it dead or what?if it's dead and that message appears then 80% is a hardware problem (flash ic and uem )...

hope this could help...

best regards,

Egypt Unlocker · 11-03-2003, 16:13

no the phone is working but the ringtone is damage
so the auto and the test mode is ok but the flash only don't work

BCNUNLOCK · 11-03-2003, 22:32

i have the same problem alsgo with 7250, and phone works correctly its mine lol

any solution?

Ladi · 01-17-2004, 21:17

I have got a similar problem with a 6310. Prodigy 1.550 reports "Unable to set the phone in DCT4 flash mode - UPP data error !". Phone is working but with UEM Tools I also get the error "Bootstrap Error No. 8" after reading the phone data. UPP ID and Flash ID are missing (not displayed).

Has anybody got an idea what's wrong or what I could do to restore UPP ID and Flash ID?

Thanks.

iyass · 01-17-2004, 22:07

@ all check your cable
or check cable conector

b r
iyass

Ladi · 01-18-2004, 12:16

Thanks for the hint. A cable was broken in the connector. Now it works perfectly.

anwar_gowalia · 02-08-2004, 02:04

hi
my prodilgy is not working properly some times i received the messages is under
1. (Unable to flash block: 0x40DA)
2. (check all algorithems not compitable found)
plz give the solutions .

Keke · 03-14-2004, 11:09

I also have one 6310i and when you plugin the cable it shows on sreen local mode but can't read , flash or set the phone to normal or test mode.

when trying give the " can't set the phone flash modeTX line remains high.

Any idea ?

Thanks

mohammadmouazen · 03-14-2004, 11:37

go to connection change to fbus command
the phone will be flashed 100%

alrbee · 03-21-2004, 10:30

Quote:

Originally Posted by anwar_gowalia

hi
my prodilgy is not working properly some times i received the messages is under
1. (Unable to flash block: 0x40DA)
2. (check all algorithems not compitable found)
plz give the solutions .

1. check the cable
2. update the flash algo

ada0611 · 03-21-2004, 10:41

Quote:

Originally Posted by anwar_gowalia

hi
my prodilgy is not working properly some times i received the messages is under
1. (Unable to flash block: 0x40DA)
2. (check all algorithems not compitable found)
plz give the solutions .

Install new fia pack!

11-03-2003, 05:11	#1 (permalink)
Egypt Unlocker Freak Poster Join Date: Oct 2001 Location: Egypt - Cairo Posts: 258 Member: 7093 Status: Offline Thanks Meter: 0	unable to set the phone in dct4 flash mode - tx line remain high when i tried to flash a 6800 or 7250i - i got this damn Msg " unable to set the phone in dct4 flash mode - tx line remain high" althought i reflash 7210 and 8310 and 6510 can anyone help me ??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to get the SGH-I550 into Flash Mode	Winter49	Samsung Flashers, Software, Firmware.	19	06-15-2013 09:23
SAMSUNG SGH X830 unable to open the file in any format.	abkyari	Samsung Hardware Repair	1	12-30-2009 11:00
Unable to Perform the Operation in nokia 6600	hd96	Nokia Hardware & Hardware Repair	1	01-30-2006 18:39
Philips 350 unable to set tat mode	stanimir_13	Redbox	9	02-08-2005 23:01
MYX1 error while flashing! now unable to connect the phone to the soft???	AE177	SagMaster Team OLD Products	7	09-20-2004 21:14

11-03-2003, 07:56	#2 (permalink)
Sandman No Life Poster Join Date: Nov 2001 Location: Never Land Posts: 924 Member: 7277 Status: Offline Sonork: 100.42158 Thanks Meter: 68	what happened to the phone???is it dead or what?if it's dead and that message appears then 80% is a hardware problem (flash ic and uem )... hope this could help... best regards,

11-03-2003, 16:13	#3 (permalink)
Egypt Unlocker Freak Poster Join Date: Oct 2001 Location: Egypt - Cairo Posts: 258 Member: 7093 Status: Offline Thanks Meter: 0	no the phone is working but the ringtone is damage so the auto and the test mode is ok but the flash only don't work

11-03-2003, 22:32	#4 (permalink)
BCNUNLOCK Junior Member Join Date: Jun 2002 Age: 41 Posts: 31 Member: 12851 Status: Offline Thanks Meter: 0	i have the same problem alsgo with 7250, and phone works correctly its mine lol any solution?

01-17-2004, 21:17	#5 (permalink)
Ladi Junior Member Join Date: Dec 2003 Posts: 11 Member: 47246 Status: Offline Thanks Meter: 0	I have got a similar problem with a 6310. Prodigy 1.550 reports "Unable to set the phone in DCT4 flash mode - UPP data error !". Phone is working but with UEM Tools I also get the error "Bootstrap Error No. 8" after reading the phone data. UPP ID and Flash ID are missing (not displayed). Has anybody got an idea what's wrong or what I could do to restore UPP ID and Flash ID? Thanks.

01-17-2004, 22:07	#6 (permalink)
iyass No Life Poster Join Date: Mar 2003 Location: USA Posts: 629 Member: 23534 Status: Offline Thanks Meter: 17	@ all check your cable or check cable conector b r iyass

01-18-2004, 12:16	#7 (permalink)
Ladi Junior Member Join Date: Dec 2003 Posts: 11 Member: 47246 Status: Offline Thanks Meter: 0	Thanks for the hint. A cable was broken in the connector. Now it works perfectly.

02-08-2004, 02:04	#8 (permalink)
anwar_gowalia Junior Member Join Date: Feb 2004 Age: 60 Posts: 1 Member: 52435 Status: Offline Thanks Meter: 0	hi my prodilgy is not working properly some times i received the messages is under 1. (Unable to flash block: 0x40DA) 2. (check all algorithems not compitable found) plz give the solutions .

03-14-2004, 11:09	#9 (permalink)
Keke No Life Poster Join Date: Jun 2002 Location: CT SA Age: 52 Posts: 1,387 Member: 12733 Status: Offline Thanks Meter: 26	I also have one 6310i and when you plugin the cable it shows on sreen local mode but can't read , flash or set the phone to normal or test mode. when trying give the " can't set the phone flash modeTX line remains high. Any idea ? Thanks

03-14-2004, 11:37	#10 (permalink)
mohammadmouazen No Life Poster Join Date: Dec 2003 Location: Jordan Posts: 790 Member: 45682 Status: Offline Thanks Meter: 54	go to connection change to fbus command the phone will be flashed 100%