Matrix dct4 cannot detect dongle - GSM-Forum

serge · 12-02-2003, 12:45

hello,
This matrix box works with dct3 and trisha but dongle cannot be detected with dct4. Tried with winXP, win98 2nd ed., and WinME to no avail. Not tried it with other computers yet. I use Pentium 4 Asus motherboard Intel 850 chipset RAMBUS. Regulated power supply tested from 7.5v 9v and 12v with 800ma still same problem. Griffin, AFD, Neelix, and Prodigy works 100% with this setup. Can anybody tell me the solution for this please. Thanks and best regards to all.

serge

fgl30 · 12-02-2003, 15:30

Do you have old or new PIC? Wich sw you are using? It seems you choose wrong Matrix software to run with your box....

serge · 12-02-2003, 15:56

Of course I am using the new software... I think the problem is hardware ... resistor or whatever but I need the experience of others with same problem.

fgl30 · 12-02-2003, 17:44

hi serge,

I think you don´t understand. I ask if you are using new or old PIC (MICROPROCESSOR).

The newest sw is not compatible with OLD PROCESSOR..... and have this problem

Any way, my only goal is help you, maybe other members can help more..........

serge · 12-02-2003, 17:57

it's the new PIC. Thanks.

handy-tuning · 12-02-2003, 19:26

Hi
I have PCB Matrix dct-3/4 Flasher
Version 22.8.03
New Final BRelease

But anny time dongle not find..

how can help ??

Regards

marvik · 12-02-2003, 20:13

Hi did you make the modification that digitec show us on the forum? if yes the matrix you have to swich it on dct4 to work becuase my when i make the mod it only work on dct4 ok maybe that what you have i hope i was of help?
Regards
MaRvIk

serge · 12-03-2003, 00:10

@gsmfriends
try to check your parallel/LPT port settings in bios - chose ECP or EPP whichever works

@marvik
I have not tried doing the modification suggested by digitec. I will have to try this first on other PC and if still not work, then I may have to check the resistors if working then try to switch to lower voltage as digitec suggested. Thanks for the info and best regards.

serge · 12-03-2003, 08:31

hello,
I tried the box with other PC and it worked to my surprise! PC chipset is SIS - worked perfectly but with my Asus Intel 850 chipset not working. So could either be OS problem or hardware incompatibility - definitely not the box ;-))

Best regards.

MiH · 12-03-2003, 09:05

...but you writed, DCT3 + Trisha SW can detect your dongle with i850 MB. May be DCT4 sw have some bug or another dongle detecting routine...

serge · 12-03-2003, 09:21

.. i don't know how to explain it but I will try to reinstall the winXp and will check again with the intel 850 mb if it's hardware or OS conflicts...

John_Doe · 12-03-2003, 12:33

Quote:

Originally posted by serge
.. i don't know how to explain it but I will try to reinstall the winXp and will check again with the intel 850 mb if it's hardware or OS conflicts...

have you tried with latest version of software, dated 17.11.2003??
this version was bugfixed in order to work with some "strange" mainboards.

serge · 12-03-2003, 13:47

I'm using version 3.11.17... i suppose this is the latest version. Anyway, when I have the time to reformat the HD and clean install winXP I will update the board on the result. Thanks for your kind reply. Best regards.

Digitec · 12-06-2003, 01:40

Let us know what was the cause.

12-02-2003, 12:45	#1 (permalink)
serge Freak Poster Join Date: Apr 2001 Location: Find out Posts: 188 Member: 4183 Status: Offline Thanks Meter: 5	Matrix dct4 cannot detect dongle hello, This matrix box works with dct3 and trisha but dongle cannot be detected with dct4. Tried with winXP, win98 2nd ed., and WinME to no avail. Not tried it with other computers yet. I use Pentium 4 Asus motherboard Intel 850 chipset RAMBUS. Regulated power supply tested from 7.5v 9v and 12v with 800ma still same problem. Griffin, AFD, Neelix, and Prodigy works 100% with this setup. Can anybody tell me the solution for this please. Thanks and best regards to all. serge

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hi team in mtk cannot detect pinouts in infinion always detect wrong pinouts	unlock_solution	MC-Tool	5	01-15-2008 12:04
box cannot detected smartcard not detected	GUDO-GSM	Infinity-Box	6	10-25-2007 12:48
Cannot Detect Mobile Brand	LogoMan	Twisterflasher	4	02-02-2004 01:15
@.:hack3r2k:. & hris922: W3026 Simlocked without sim, NOW cannot detect simcard	dannyogolo	Infineon C16X M51 & ARM7 M52 BASED	5	09-12-2003 19:02
DCT4 uem detection	GvS	Nokia Multimedia	4	04-13-2003 01:58

12-02-2003, 15:30	#2 (permalink)
fgl30 No Life Poster Join Date: May 2003 Posts: 1,357 Member: 27881 Status: Offline Thanks Meter: 11	Do you have old or new PIC? Wich sw you are using? It seems you choose wrong Matrix software to run with your box....

12-02-2003, 15:56	#3 (permalink)
serge Freak Poster Join Date: Apr 2001 Location: Find out Posts: 188 Member: 4183 Status: Offline Thanks Meter: 5	Of course I am using the new software... I think the problem is hardware ... resistor or whatever but I need the experience of others with same problem.

12-02-2003, 17:44	#4 (permalink)
fgl30 No Life Poster Join Date: May 2003 Posts: 1,357 Member: 27881 Status: Offline Thanks Meter: 11	hi serge, I think you don´t understand. I ask if you are using new or old PIC (MICROPROCESSOR). The newest sw is not compatible with OLD PROCESSOR..... and have this problem Any way, my only goal is help you, maybe other members can help more..........

12-02-2003, 17:57	#5 (permalink)
serge Freak Poster Join Date: Apr 2001 Location: Find out Posts: 188 Member: 4183 Status: Offline Thanks Meter: 5	it's the new PIC. Thanks.

12-02-2003, 19:26	#6 (permalink)
handy-tuning Freak Poster Join Date: Jul 2002 Location: Germany Age: 55 Posts: 112 Member: 13426 Status: Offline Thanks Meter: 4	Hi I have PCB Matrix dct-3/4 Flasher Version 22.8.03 New Final BRelease But anny time dongle not find.. how can help ?? Regards

12-02-2003, 20:13	#7 (permalink)
marvik Freak Poster Join Date: Nov 2003 Location: moon Age: 53 Posts: 111 Member: 43572 Status: Offline Thanks Meter: 0	Hi did you make the modification that digitec show us on the forum? if yes the matrix you have to swich it on dct4 to work becuase my when i make the mod it only work on dct4 ok maybe that what you have i hope i was of help? Regards MaRvIk

12-03-2003, 00:10	#8 (permalink)
serge Freak Poster Join Date: Apr 2001 Location: Find out Posts: 188 Member: 4183 Status: Offline Thanks Meter: 5	@gsmfriends try to check your parallel/LPT port settings in bios - chose ECP or EPP whichever works @marvik I have not tried doing the modification suggested by digitec. I will have to try this first on other PC and if still not work, then I may have to check the resistors if working then try to switch to lower voltage as digitec suggested. Thanks for the info and best regards.

12-03-2003, 08:31	#9 (permalink)
serge Freak Poster Join Date: Apr 2001 Location: Find out Posts: 188 Member: 4183 Status: Offline Thanks Meter: 5	hello, I tried the box with other PC and it worked to my surprise! PC chipset is SIS - worked perfectly but with my Asus Intel 850 chipset not working. So could either be OS problem or hardware incompatibility - definitely not the box ;-)) Best regards.

12-03-2003, 09:05	#10 (permalink)
MiH Freak Poster Join Date: Dec 2002 Location: slovakia Age: 48 Posts: 259 Member: 18876 Status: Offline Thanks Meter: 27	...but you writed, DCT3 + Trisha SW can detect your dongle with i850 MB. May be DCT4 sw have some bug or another dongle detecting routine...

12-03-2003, 09:21	#11 (permalink)
serge Freak Poster Join Date: Apr 2001 Location: Find out Posts: 188 Member: 4183 Status: Offline Thanks Meter: 5	.. i don't know how to explain it but I will try to reinstall the winXp and will check again with the intel 850 mb if it's hardware or OS conflicts...

12-03-2003, 13:47	#13 (permalink)
serge Freak Poster Join Date: Apr 2001 Location: Find out Posts: 188 Member: 4183 Status: Offline Thanks Meter: 5	I'm using version 3.11.17... i suppose this is the latest version. Anyway, when I have the time to reformat the HD and clean install winXP I will update the board on the result. Thanks for your kind reply. Best regards.

12-06-2003, 01:40	#14 (permalink)
Digitec Freak Poster Join Date: Oct 2003 Age: 55 Posts: 195 Member: 40921 Status: Offline Thanks Meter: 0	Let us know what was the cause.