GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Trisha & Matrix Flasher (https://forum.gsmhosting.com/vbb/f240/)
-   -   Your Motherboard Is Supporting Or Not? (https://forum.gsmhosting.com/vbb/f240/your-motherboard-supporting-not-115217/)

needi 12-04-2003 01:25

Your Motherboard Is Supporting Or Not?
 
Well after a long experience with the motherboards and the third party softwares i have came to a conclusion that i want to share with you guys.

The best and supporting motherboards are following.

1. SIS 735-746 chipsets and almost all
2. N-vidia Nforce chipsets

And the half working are Intel chipsets.The VIA chipsets are worst of all.You can have really silly error messeges while using VIA chipsets motherboards.And with the above said there is no problem, you can run any kind of software without any problems.The cheapest of all SIS 735 chipset motherboard from ECS is around 40$.I hope this information will be usefull for the members.Any questions regarding the computer hardware are welcome.
:D :D

WBR.

Mastah-GSi 12-04-2003 09:41

To use the Matrix I use a Toshiba Satellite Pro 4200.
It's a Pentium III 500Mhz with 64mb memory. Don't know what kind a chipset there is in it, but it's working really fine.

Now I'm trying a AMD K6 (equals PII) 333mhz with 512mb memory with Ali chipset.
Just flashed a 3310 DCT3 with third party software (Rolis 4.77) and it works just fine.
I'll try a DCT4 later on.
Last night I alterd the revision 22.8.03 to work with 5210. Hopefully it works...

mr_x4you 12-04-2003 11:16

Well, a good programer makes his sw run on ant MB, no matter chipset !

needi 12-04-2003 20:02

yes if the soft developer is a good programmer.

Digitec 12-06-2003 01:39

some chipsets does not like shortcut on COM port between PIN 1 and PIN 2 of RS 232 interface. This shortcut is req. by some Nokia SW.

legija 12-06-2003 02:15

For me, wont work on IBM Laptops.
Al other desktops i have, it works, only can't flash DCT4 phones with P II@350, it's too slow.

a4tech 12-06-2003 03:15

is there any comment on using AMD Processors?

i am using Duron and Athlon for DCT3 and DCT4...no problems encountered....

fgl30 12-06-2003 11:38

Well, I use 2 AMD K6 II, Matrix works very good...... and use 1 (old) Celeron (****/slow) but Matrix works good too...... and I dont conect cables in ports...I use long cable extension...but Matrix works good any way......

needi 12-06-2003 20:19

No there is no problem with the CPU's it self.Only matters is the motherboard architechure and its chipsets.For AMD the best chipsets are SIS and N-vidia.And if you are using them absolutely no problem.Yes the CPU speed really mattersand for some software you need more memory too.And also in some cases i experienced that the SDRAM is better than DDRAM.


BEST REGARDS.


All times are GMT +1. The time now is 09:46.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.10955 seconds with 7 queries

SEO by vBSEO