1110 contact service plz someone solve this proble - GSM-Forum

kasra · 10-12-2006, 16:30

i have the 1110 and problem is i wants too change the language the phone version was 5.03 then i erase flash with erase buttonand i flash it with 3.42 and phone cant go to local mode for flash cnt package and writing pm and ui setting i flash 4.8 still the same i flash 5.03 and its contact service and i flash 5.53 its contact service too
any one know how can i solve this problem
<so sorry for my poor english>

haveri · 10-12-2006, 17:12

yes , back again and flash with flash that phone have before.

..and all be ok.

best.r

asmodi · 10-12-2006, 20:00

Do this :

1- eraze flash
2- flash mcu + ppm + cnt
3- upload pm
4- do ini setings

mansooreyan · 10-12-2006, 23:34

Just Unlock Use Jaf 100% Work
[email protected]
+989131154402

kasra · 10-14-2006, 07:30

phone flash version was 5.03 when i flash the phone with that version its contact service
when i write pm its still contact service!!

Luc+Luc · 10-14-2006, 09:26

Try to flash with 5.53 with charger inside during flashing proces. Be sure that cnt file have "nai" in name! After flashing process do full factory defaults and unlock phone. I was solve my problem...
BR

UCSTEL · 10-14-2006, 10:17

hi
flash version was 5.03 i m flish pic not ok

wasifkhan · 10-14-2006, 17:33

flash with 3.42 version then do ui settings one by one . all will be okay

regards

kasra · 10-15-2006, 09:08

Quote:

Originally Posted by Luc+Luc

Try to flash with 5.53 with charger inside during flashing proces. Be sure that cnt file have "nai" in name! After flashing process do full factory defaults and unlock phone. I was solve my problem...
BR

i erase the flash then flash it with 5.53 and when i try with charger phone cannot boot and when inside charger when phone boots at erasing ppm file it stop i try whithout charger and still contact service
i try too write pm, but still the contact service
and when i try too flash it with 3.08

1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE
Algorithm: u_amd.fia, Ver: 4.52.0
Algorithm Ok, MSID: 84F02FE04D596AB4D9BE35B6B5
Decoded MSID: 3E4EBAE9-0097DB14-A8000000
Encoded FAID: 11554CB4-10AD5DFE-6F3AD288
Area1: 0x01000000-0x0100FFFF Erased, Time: 000
Area2: 0x01010000-0x013BFFFF Erased, Time: 027
Area3: 0x013C0000-0x013EFFFF Erased, Time: 001
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 011
Area1: 0x01380000-0x013BFFFF Erased, Time: 001
CNT Flashing Completed, Time: 000
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

kasra · 10-15-2006, 09:13

Quote:

Originally Posted by wasifkhan

flash with 3.42 version then do ui settings one by one . all will be okay

regards

here is the log for flashing the phone with 3.42
1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE
Algorithm: u_amd.fia, Ver: 4.52.0
Algorithm Ok, MSID: 8434BBDA8D908B257A3E6F2585
Decoded MSID: 3E4EBAE9-0097DB14-AA000000
Encoded FAID: 23BC4B61-31E9586D-4A7AD0BD
Area1: 0x01000000-0x0100FFFF Erased, Time: 000
Area2: 0x01010000-0x013BFFFF Erased, Time: 026
Area3: 0x013C0000-0x013EFFFF Erased, Time: 001
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 010
Area1: 0x011C0000-0x011CFFFF Erased, Time: 000
Area2: 0x011D0000-0x0137FFFF Erased, Time: 012
CNT Flashing Completed, Time: 008
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

phone cannot go to local mode for cnt and ui setting and pm
i use only the mcu and ppm file but still the same

Kashif Khan · 10-15-2006, 09:30

Quote:

Originally Posted by kasra

here is the log for flashing the phone with 3.42
1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE
Algorithm: u_amd.fia, Ver: 4.52.0
Algorithm Ok, MSID: 8434BBDA8D908B257A3E6F2585
Decoded MSID: 3E4EBAE9-0097DB14-AA000000
Encoded FAID: 23BC4B61-31E9586D-4A7AD0BD
Area1: 0x01000000-0x0100FFFF Erased, Time: 000
Area2: 0x01010000-0x013BFFFF Erased, Time: 026
Area3: 0x013C0000-0x013EFFFF Erased, Time: 001
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 010
Area1: 0x011C0000-0x011CFFFF Erased, Time: 000
Area2: 0x011D0000-0x0137FFFF Erased, Time: 012
CNT Flashing Completed, Time: 008
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

phone cannot go to local mode for cnt and ui setting and pm
i use only the mcu and ppm file but still the same

Erase whole flash correctly than write the flash i hope problem will solve.and after that you need good pm for avoide the contact service,i know you are already erasing .

BR

kasra · 10-15-2006, 10:07

i erase whole flash with erase button but still the same with lower version of 5.03 but still the same and after that i cant write pm because phone cannot go too local mode just after v 5.03 and 5.53 i can write pm but still contact service

mobile star · 11-04-2006, 14:02

Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE
[/quote]

no solution yet for this flash type

skydreas · 11-06-2006, 15:37

unlock with jaf.works %100

10-12-2006, 16:30	#1 (permalink)
kasra No Life Poster Join Date: Jan 2005 Location: Iran Age: 36 Posts: 748 Member: 103435 Status: Offline Thanks Meter: 49	1110 contact service plz someone solve this proble i have the 1110 and problem is i wants too change the language the phone version was 5.03 then i erase flash with erase buttonand i flash it with 3.42 and phone cant go to local mode for flash cnt package and writing pm and ui setting i flash 4.8 still the same i flash 5.03 and its contact service and i flash 5.53 its contact service too any one know how can i solve this problem <so sorry for my poor english>

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6300 contact service plz help me [SOLVED]	gsm.magic	Cyclonebox	3	02-18-2010 23:31
6500s contact service. how to solve this?	trio1	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	5	12-04-2009 15:16
1110i contact service how to solve this ?????	texas-gsm	Multi-Box	5	07-22-2008 17:53
nokia 1110 contact service help help	manrew	Nokia Digital Core Technology 4 ( DCT-4 )	6	01-13-2007 13:23
help me plz (( 1110 contact service ))	tayson_gsm	Nokia Digital Core Technology 4 ( DCT-4 )	3	06-06-2006 16:49

10-12-2006, 17:12	#2 (permalink)
haveri No Life Poster Join Date: Jul 2005 Location: Republic of Kosova Age: 47 Posts: 521 Member: 158663 Status: Offline Thanks Meter: 27	yes , back again and flash with flash that phone have before. ..and all be ok. best.r

10-12-2006, 20:00	#3 (permalink)
asmodi No Life Poster Join Date: Sep 2005 Posts: 1,068 Member: 183976 Status: Offline Thanks Meter: 134	Do this : 1- eraze flash 2- flash mcu + ppm + cnt 3- upload pm 4- do ini setings

10-12-2006, 23:34	#4 (permalink)
mansooreyan Junior Member Join Date: Oct 2006 Posts: 17 Member: 369468 Status: Offline Thanks Meter: 1	Just Unlock Use Jaf 100% Work [email protected] +989131154402

10-14-2006, 07:30	#5 (permalink)
kasra No Life Poster Join Date: Jan 2005 Location: Iran Age: 36 Posts: 748 Member: 103435 Status: Offline Thanks Meter: 49	phone flash version was 5.03 when i flash the phone with that version its contact service when i write pm its still contact service!!

10-14-2006, 09:26	#6 (permalink)
Luc+Luc No Life Poster Join Date: Oct 2004 Location: Bosnia, Kiseljak Age: 41 Posts: 590 Member: 85694 Status: Offline Thanks Meter: 48	Try to flash with 5.53 with charger inside during flashing proces. Be sure that cnt file have "nai" in name! After flashing process do full factory defaults and unlock phone. I was solve my problem... BR

10-14-2006, 10:17	#7 (permalink)
UCSTEL Freak Poster Join Date: Jun 2005 Age: 45 Posts: 189 Member: 155401 Status: Offline Thanks Meter: 3	hi flash version was 5.03 i m flish pic not ok

10-14-2006, 17:33	#8 (permalink)
wasifkhan Freak Poster Join Date: Jul 2004 Location: UAE Age: 40 Posts: 422 Member: 72783 Status: Offline Thanks Meter: 22	flash with 3.42 version then do ui settings one by one . all will be okay regards

10-15-2006, 10:07	#12 (permalink)
kasra No Life Poster Join Date: Jan 2005 Location: Iran Age: 36 Posts: 748 Member: 103435 Status: Offline Thanks Meter: 49	i erase whole flash with erase button but still the same with lower version of 5.03 but still the same and after that i cant write pm because phone cannot go too local mode just after v 5.03 and 5.53 i can write pm but still contact service

11-04-2006, 14:02	#13 (permalink)
mobile star Freak Poster Join Date: Feb 2004 Location: jordan Age: 47 Posts: 348 Member: 54916 Status: Offline Thanks Meter: 58	Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE [/quote] no solution yet for this flash type

11-06-2006, 15:37	#14 (permalink)
skydreas Freak Poster Join Date: Feb 2006 Posts: 110 Member: 237816 Status: Offline Thanks Meter: 4	unlock with jaf.works %100