1st Boot Err: Bad Resp UPP, 02 FF FF 72 - GSM-Forum

ficho · 02-14-2004, 15:46

what is this infact ?
eum is ok upp is ok what else to check ?
wbr ficho

isaackenny · 02-14-2004, 16:03

UPP problem.. tried resolder .. u can tried with griffin the error shoud be FFFF9100

essojay · 02-14-2004, 17:58

dont check on "autodetect product" and dont check "use ini file setting" after that do CHECK, and if you still have error, then check your cable..

bR

panji_millenium · 02-16-2004, 02:45

try many times .. watchout ur cable and connection to the phone

locer · 02-16-2004, 05:07

I have such mistake with UFS2 Tornado on Nokia 5210. I use same cable, Prodigy loads flash 100 %.

ficho · 02-16-2004, 09:35

My cable is 100% ok because I have done other 8310 phones with np..
I have new uem and new upp and have changed them again with new uem/Upp just for any case,, again same ****.. If I remove UPP then tornado response 03 00 00 72 ( what means upp not respond ) so in case 02 FF FF 72 upp responds !!! but in manual it is written cant set flash mode.. ( it doenst matter if flash is installed or not.. I test this on some other phoe ) so I measured 32khz if it goes from uem to upp ok I changed hagar and 26mhz also same and I didnt try 13mhz but this isnt important at all as I think
ficho

sergioems · 05-06-2004, 00:04

did you solve it? and if so how?

Critter · 07-01-2004, 13:11

Same problem here...

Any solution availble?

BANTUGBRO · 07-02-2004, 11:56

Plz,Check again ur Cable mate!

WBR,
BANTUGBRO

webmoly · 11-17-2004, 19:30

Hi

where can I download 5210 MCU and PPM with Persian or english language ? Its flash files are not listed in UFS support area.

can anyone gimme a link to download them or send them to [email protected] ?

hope to hear soon
have fun
moly

doctorvatson · 11-18-2004, 17:08

setup last fia package 03.18

alex1 · 11-18-2004, 17:11

your phone's upp is damaged or unsoldered
but check all conections with phone too

354boyo · 03-02-2005, 05:52

try to check your flash, or remove your flash, then just check

lood · 04-16-2005, 20:26

Got the same problem,
but tried some ui setting before, then check=> Ok.

farsi_007 · 01-10-2010, 09:28

first of all wash ur fone
then heat on cpu and power
then connect 100% ok

02-14-2004, 15:46	#1 (permalink)
ficho Freak Poster Join Date: Oct 2001 Posts: 141 Member: 7054 Status: Offline Thanks Meter: 1	1st Boot Err: Bad Resp UPP, 02 FF FF 72 what is this infact ? eum is ok upp is ok what else to check ? wbr ficho

11-17-2004, 19:30	#10 (permalink)
webmoly Freak Poster Join Date: May 2004 Location: Iran - Qum Age: 43 Posts: 449 Member: 66171 Status: Offline Thanks Meter: 6	5210 flash need Hi where can I download 5210 MCU and PPM with Persian or english language ? Its flash files are not listed in UFS support area. can anyone gimme a link to download them or send them to [email protected] ? hope to hear soon have fun moly

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1st Boot Err: Bad Resp UPP, 03 00 00 72	XARiUS	UFS2 + UFS3-Tornadoflasher	5	10-05-2011 15:12
1st Boot Err: Bad Resp UPP, 03 00 00 72 (NOKIA 6230.)	davoldv	UFS2 + UFS3-Tornadoflasher	6	08-15-2010 16:53
twister error 1st Boot Err: Bad Resp UPP, A0 F6 FF 72 ???	nnnm0sad	Twisterflasher	1	06-16-2005 11:36
1st Boot Err: Bad Resp UFSx	gbrooks3	n-Box	3	03-15-2005 14:03
1st Boot Err: Bad Resp Ufs	graca	Twisterflasher	2	05-27-2004 11:12

02-14-2004, 16:03	#2 (permalink)
isaackenny Freak Poster Join Date: Feb 2002 Location: singapore Age: 46 Posts: 404 Member: 9194 Status: Offline Thanks Meter: 3	UPP problem.. tried resolder .. u can tried with griffin the error shoud be FFFF9100

02-14-2004, 17:58	#3 (permalink)
essojay No Life Poster Join Date: Jul 2002 Location: uk Posts: 3,601 Member: 13808 Status: Offline Thanks Meter: 163	dont check on "autodetect product" and dont check "use ini file setting" after that do CHECK, and if you still have error, then check your cable.. bR

02-16-2004, 02:45	#4 (permalink)
panji_millenium Insane Poster Join Date: Nov 2003 Location: Indonesia Age: 47 Posts: 64 Member: 43813 Status: Offline Thanks Meter: 1	try many times .. watchout ur cable and connection to the phone

02-16-2004, 05:07	#5 (permalink)
locer No Life Poster Join Date: Jan 2002 Location: Latvia Posts: 663 Member: 8435 Status: Offline Thanks Meter: 7	I have such mistake with UFS2 Tornado on Nokia 5210. I use same cable, Prodigy loads flash 100 %.

02-16-2004, 09:35	#6 (permalink)
ficho Freak Poster Join Date: Oct 2001 Posts: 141 Member: 7054 Status: Offline Thanks Meter: 1	My cable is 100% ok because I have done other 8310 phones with np.. I have new uem and new upp and have changed them again with new uem/Upp just for any case,, again same ****.. If I remove UPP then tornado response 03 00 00 72 ( what means upp not respond ) so in case 02 FF FF 72 upp responds !!! but in manual it is written cant set flash mode.. ( it doenst matter if flash is installed or not.. I test this on some other phoe ) so I measured 32khz if it goes from uem to upp ok I changed hagar and 26mhz also same and I didnt try 13mhz but this isnt important at all as I think ficho

05-06-2004, 00:04	#7 (permalink)
sergioems No Life Poster Join Date: Feb 2002 Location: Portugal- Center of Europe Age: 42 Posts: 1,244 Member: 9502 Status: Offline Thanks Meter: 9	did you solve it? and if so how?

07-01-2004, 13:11	#8 (permalink)
Critter Crazy Poster Join Date: Jun 2003 Location: Some weird planet Age: 44 Posts: 53 Member: 31062 Status: Offline Thanks Meter: 0	Same problem here... Any solution availble?

07-02-2004, 11:56	#9 (permalink)
BANTUGBRO Freak Poster Join Date: Nov 2003 Age: 49 Posts: 204 Member: 43363 Status: Offline Thanks Meter: 2	Plz,Check again ur Cable mate! WBR, BANTUGBRO

11-18-2004, 17:08	#11 (permalink)
doctorvatson No Life Poster Join Date: Aug 2001 Location: Russia Moscow Age: 46 Posts: 567 Member: 5889 Status: Offline Thanks Meter: 0	setup last fia package 03.18

11-18-2004, 17:11	#12 (permalink)
alex1 Junior Member Join Date: Jul 2004 Age: 43 Posts: 16 Member: 73037 Status: Offline Thanks Meter: 0	your phone's upp is damaged or unsoldered but check all conections with phone too

03-02-2005, 05:52	#13 (permalink)
354boyo Freak Poster Join Date: May 2004 Location: kediri Age: 46 Posts: 141 Member: 65714 Status: Offline Thanks Meter: 17	try to check your flash, or remove your flash, then just check

04-16-2005, 20:26	#14 (permalink)
lood Freak Poster Join Date: Nov 2002 Posts: 155 Member: 18194 Status: Offline Thanks Meter: 7	Got the same problem, but tried some ui setting before, then check=> Ok.

01-10-2010, 09:28	#15 (permalink)
farsi_007 No Life Poster Join Date: Mar 2007 Location: Chandpur U.P.West India Posts: 583 Member: 472592 Status: Offline Sonork: 100.1664052 Thanks Meter: 180	first of all wash ur fone then heat on cpu and power then connect 100% ok