3510i flashing - GSM-Forum

Porche · 01-01-2005, 14:13

How do I flash a 3510i which are the correct file for the wallpapers etc.I am in the uk so MCU 4.44O ppm 4.44a I think.

gbluez · 01-01-2005, 15:37

here is the example. the newest firmware for 3510i is v5.35.

Mcu : rh9__05.350 ---> Not end with an "o", it's zero.
ppm: rh9__05.35A
CP: cp_pA_05.350

Porche · 01-01-2005, 18:24

@ gbluez
Were could I get the latest version from because the version thats on the UFSX site is 04.44.
cheers

Mirken · 01-02-2005, 15:12

on ufsxsupport is 5.35, go there, on ufx.com are still uploading other firmware in these days

Bypx · 01-02-2005, 15:40

5.35 also available on my site, just see this thread:

Nokia Flash Files

BR, Bypx.

Porche · 01-02-2005, 20:04

@ Bypx

The link does not work.

Porche · 01-04-2005, 12:26

When I try to flash the 3510i with UFS3 the phone says test mode then local mode on the screen but it will not flash,am I doing something wrong.

Bypx · 01-04-2005, 12:30

Quote:

Originally Posted by Porche

@ Bypx

The link does not work.

Link working.. .

Porche · 01-04-2005, 12:57

cheers Bypx

I have just flashed the phone but now there is no signal bar or network.How do you set the faid on a dct 4 in ufs3
cheers

gbluez · 01-05-2005, 18:29

there is no set faid on dct4. just follow this:

1. flash all mcu, ppm, content.
2. set full factory.
3---> check it.

4.read info. if it shows a lot of blank description, you need to write good pm. Bad pm caused no signal, not charging, etc.
5. some case, after write pm, need to be unlock. Dont forget to set full factory.

regards - may help

maximusdecimus · 02-03-2005, 17:25

Give me PM of 3uk.
nokia7600
help

01-01-2005, 14:13	#1 (permalink)
Porche Major Poster Join Date: Dec 2003 Posts: 46 Member: 47563 Status: Offline Thanks Meter: 0	3510i flashing How do I flash a 3510i which are the correct file for the wallpapers etc.I am in the uk so MCU 4.44O ppm 4.44a I think.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3510i flash error??	uni_gsm_tech	Nokia Digital Core Technology 4 ( DCT-4 )	1	07-27-2003 18:17
3510i flash error??	uni_gsm_tech	Nokia Multimedia	2	07-27-2003 09:23
3510 and 3510i flash files	GSM MIND	Nokia Digital Core Technology 4 ( DCT-4 )	1	07-25-2003 13:55
3510i flashing with new ID	Migeni	Nokia Digital Core Technology 4 ( DCT-4 )	3	03-27-2003 14:51
Problems with 3510i flashing with griffin	MaTeOoSh	Nokia Digital Core Technology 4 ( DCT-4 )	6	03-03-2003 09:20

01-01-2005, 15:37	#2 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	here is the example. the newest firmware for 3510i is v5.35. Mcu : rh9__05.350 ---> Not end with an "o", it's zero. ppm: rh9__05.35A CP: cp_pA_05.350

01-01-2005, 18:24	#3 (permalink)
Porche Major Poster Join Date: Dec 2003 Posts: 46 Member: 47563 Status: Offline Thanks Meter: 0	@ gbluez Were could I get the latest version from because the version thats on the UFSX site is 04.44. cheers

01-02-2005, 15:12	#4 (permalink)
Mirken Freak Poster Join Date: Dec 2004 Location: Inside my brain Posts: 439 Member: 97242 Status: Offline Thanks Meter: 14	on ufsxsupport is 5.35, go there, on ufx.com are still uploading other firmware in these days

01-02-2005, 15:40	#5 (permalink)
Bypx No Life Poster Join Date: Apr 2004 Location: Milano, Italy Age: 37 Posts: 2,170 Member: 62336 Status: Offline Thanks Meter: 115	5.35 also available on my site, just see this thread: Nokia Flash Files BR, Bypx.

01-02-2005, 20:04	#6 (permalink)
Porche Major Poster Join Date: Dec 2003 Posts: 46 Member: 47563 Status: Offline Thanks Meter: 0	@ Bypx The link does not work.

01-04-2005, 12:26	#7 (permalink)
Porche Major Poster Join Date: Dec 2003 Posts: 46 Member: 47563 Status: Offline Thanks Meter: 0	When I try to flash the 3510i with UFS3 the phone says test mode then local mode on the screen but it will not flash,am I doing something wrong.

01-04-2005, 12:57	#9 (permalink)
Porche Major Poster Join Date: Dec 2003 Posts: 46 Member: 47563 Status: Offline Thanks Meter: 0	cheers Bypx I have just flashed the phone but now there is no signal bar or network.How do you set the faid on a dct 4 in ufs3 cheers

01-05-2005, 18:29	#10 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	there is no set faid on dct4. just follow this: 1. flash all mcu, ppm, content. 2. set full factory. 3---> check it. 4.read info. if it shows a lot of blank description, you need to write good pm. Bad pm caused no signal, not charging, etc. 5. some case, after write pm, need to be unlock. Dont forget to set full factory. regards - may help

02-03-2005, 17:25	#11 (permalink)
maximusdecimus Insane Poster Join Date: Jan 2005 Age: 46 Posts: 90 Member: 103961 Status: Offline Thanks Meter: 0	Give me PM of 3uk. nokia7600 help