Nokia 2600 (RH-59) Init local mode Failed - GSM-Forum

GRIFFFMAN · 04-22-2005, 09:05

Flashing is OK.
Init local mode Failed.
Phone is dead.

What is the probleme??

STOMATELA · 04-25-2005, 08:15

try one new table
or try to modify like picture iun atash y need one r=3.3 kohm

.:bono:. · 03-15-2006, 16:11

always the same problem at the cnt in 2600.
problem is soft, and no one have gave a good solution.

1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u_st_i.fia, Ver: 4.49.0
Algorithm Ok, MSID: 84F3919958AD91ECCDD4F6B642
Decoded MSID: 3E4EBAE9-00C7B2AC-AA000000
Encoded FAID: 53E4CF96-D64751C6-132F5A2A
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013AFFFF Erased, Time: 00:37
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:03
Area4: 0x017B0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FB0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:32
Area1: 0x01370000-0x013AFFFF Erased, Time: 00:03
CNT Flashing Completed, Time: 00:04
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

vbfather · 03-15-2006, 23:25

Quote:

Originally Posted by bono_x100

always the same problem at the cnt in 2600.
problem is soft, and no one have gave a good solution.

1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u_st_i.fia, Ver: 4.49.0
Algorithm Ok, MSID: 84F3919958AD91ECCDD4F6B642
Decoded MSID: 3E4EBAE9-00C7B2AC-AA000000
Encoded FAID: 53E4CF96-D64751C6-132F5A2A
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013AFFFF Erased, Time: 00:37
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:03
Area4: 0x017B0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FB0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:32
Area1: 0x01370000-0x013AFFFF Erased, Time: 00:03
CNT Flashing Completed, Time: 00:04
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

no ??!!!!!
i flashed many phones and more than one by UFS and with flash CNT.
i will post logs when i can.

BR,

.:bono:. · 03-15-2006, 23:48

Quote:

Originally Posted by vbfather

no ??!!!!!
i flashed many phones and more than one by UFS and with flash CNT.
i will post logs when i can.

BR,

yeeeeeeeeees!! mate
i didn't say that i have never sucseed to flash a 2600 with ufs, but i have got this error many times with some phones.
kapichiiiiiiiiii??!!

vbfather · 03-16-2006, 01:16

OK no problem..

BR.

.:AnOuaR:. · 06-30-2006, 00:40

1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x01FFFFFF,87CDB60A,
Algorithm: u_intel.fia, Ver: 4.44.1
Algorithm Ok, MSID: 84A581166551D78216923EB542
Decoded MSID: 3E4EBAE9-005578A7-A8000000
Encoded FAID: 29C3B644-407D871C-6853E855
Erasing: 0x011FC000-0x011FFFFF ...
Erasing Error: 10, at: 0x011FC000-0x011FFFFF, 940207, Time: 00:00
Process Failed, Repowering Mobile

same problem in 2600 are there solution ???

may_power · 06-30-2006, 01:24

@.:AnOuaR:.

flash ic problem

.:AnOuaR:. · 06-30-2006, 12:56

My friend you mean i change the flash ic ??

ebu mohammed-emin · 07-01-2006, 00:19

same time i have the same problem .i still wait to camming CNT Flashing Completed, Time: 00:04 after press the on off button wait so to finish the flash komplett most time it will be work.

asmodi · 07-01-2006, 05:47

what cable u are using ???

speedtech · 08-01-2006, 08:31

1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00012A7E,Amd 29BDS320
Algorithm: u_amd.fia, Ver: 4.49.0

this the error it won't continue

tony1972 · 08-07-2006, 16:14

hello,evrybody.
i have nokia 2600 its working but some time its show TEST MODE
i do ui setting but its not solve....pls help me.
thanks

provat · 06-24-2009, 19:51

Quote:

Originally Posted by .:bono:.

always the same problem at the cnt in 2600.
problem is soft, and no one have gave a good solution.

1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u_st_i.fia, Ver: 4.49.0
Algorithm Ok, MSID: 84F3919958AD91ECCDD4F6B642
Decoded MSID: 3E4EBAE9-00C7B2AC-AA000000
Encoded FAID: 53E4CF96-D64751C6-132F5A2A
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013AFFFF Erased, Time: 00:37
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:03
Area4: 0x017B0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FB0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:32
Area1: 0x01370000-0x013AFFFF Erased, Time: 00:03
CNT Flashing Completed, Time: 00:04
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

hello, i am provat, pls replay

.:bono:. · 06-24-2009, 20:06

Quote:

Originally Posted by provat

hello, i am provat, pls replay

well, first time i replay to a three years old thread.
hello, i'm bono.

04-22-2005, 09:05	#1 (permalink)
GRIFFFMAN Freak Poster Join Date: May 2003 Location: Moldova Age: 48 Posts: 263 Member: 28713 Status: Offline Thanks Meter: 3	Nokia 2600 (RH-59) Init local mode Failed Flashing is OK. Init local mode Failed. Phone is dead. What is the probleme??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6070 Init Local Mode Fail	SkyNet4u	Nokia Hardware & Hardware Repair	10	06-25-2011 02:31
Init Local Mode Failed - Problem Solved	SkyNet4u	HWK	0	10-11-2008 13:40
6086 cant unlock...Init Local Mode Failed	MOURAD™	HWK	0	01-24-2008 13:06
Nokia 6670 - Init Local Mode Failed	Hersonsky	Twisterflasher	1	11-13-2005 11:34

03-15-2006, 16:11	#3 (permalink)
.:bono:. No Life Poster Join Date: Dec 2004 Location: Algeria Posts: 3,142 Member: 96141 Status: Offline Thanks Meter: 200	always the same problem at the cnt in 2600. problem is soft, and no one have gave a good solution. 1st Boot Ok, DCT4, UPP: 1201 Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032 Algorithm: u_st_i.fia, Ver: 4.49.0 Algorithm Ok, MSID: 84F3919958AD91ECCDD4F6B642 Decoded MSID: 3E4EBAE9-00C7B2AC-AA000000 Encoded FAID: 53E4CF96-D64751C6-132F5A2A Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00 Area2: 0x01010000-0x013AFFFF Erased, Time: 00:37 Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:03 Area4: 0x017B0000-0x017EFFFF Out of Chip Bounds Area5: 0x01FB0000-0x01FEFFFF Out of Chip Bounds MCU Flashing Completed, Time: 00:32 Area1: 0x01370000-0x013AFFFF Erased, Time: 00:03 CNT Flashing Completed, Time: 00:04 Extracting Contents Package ... Init Local Mode Failed Contents Package Extracting Failed: Process Failed, Repowering Mobile

03-16-2006, 01:16	#6 (permalink)
vbfather No Life Poster Join Date: Feb 2005 Location: Nostalgia... Age: 41 Posts: 514 Member: 121728 Status: Offline Thanks Meter: 38	OK no problem.. BR.

06-30-2006, 00:40	#7 (permalink)
.:AnOuaR:. No Life Poster Join Date: Apr 2004 Location: london, united kingdom Age: 42 Posts: 518 Member: 62602 Status: Offline Thanks Meter: 6	1st Boot Ok, DCT4, UPP: 1201 Fl0: 0x01000000-0x01FFFFFF,87CDB60A, Algorithm: u_intel.fia, Ver: 4.44.1 Algorithm Ok, MSID: 84A581166551D78216923EB542 Decoded MSID: 3E4EBAE9-005578A7-A8000000 Encoded FAID: 29C3B644-407D871C-6853E855 Erasing: 0x011FC000-0x011FFFFF ... Erasing Error: 10, at: 0x011FC000-0x011FFFFF, 940207, Time: 00:00 Process Failed, Repowering Mobile same problem in 2600 are there solution ???

06-30-2006, 01:24	#8 (permalink)
may_power Freak Poster Join Date: Apr 2005 Age: 42 Posts: 174 Member: 137670 Status: Offline Thanks Meter: 12	@.:AnOuaR:. flash ic problem

06-30-2006, 12:56	#9 (permalink)
.:AnOuaR:. No Life Poster Join Date: Apr 2004 Location: london, united kingdom Age: 42 Posts: 518 Member: 62602 Status: Offline Thanks Meter: 6	My friend you mean i change the flash ic ??

07-01-2006, 00:19	#10 (permalink)
ebu mohammed-emin No Life Poster Join Date: Apr 2006 Location: The Arrivals Posts: 1,437 Member: 263993 Status: Offline Sonork: 100.1612432 Thanks Meter: 173	same time i have the same problem .i still wait to camming CNT Flashing Completed, Time: 00:04 after press the on off button wait so to finish the flash komplett most time it will be work.

07-01-2006, 05:47	#11 (permalink)
asmodi No Life Poster Join Date: Sep 2005 Posts: 1,068 Member: 183976 Status: Offline Thanks Meter: 134	what cable u are using ???

08-01-2006, 08:31	#12 (permalink)
speedtech Insane Poster Join Date: Jan 2005 Location: sa kawalan Posts: 86 Member: 110414 Status: Offline Thanks Meter: 5	1st Boot Ok, DCT4, UPP: 2201 Fl0: 0x01000000-0x013FFFFF,00012A7E,Amd 29BDS320 Algorithm: u_amd.fia, Ver: 4.49.0 this the error it won't continue

08-07-2006, 16:14	#13 (permalink)
tony1972 Freak Poster Join Date: May 2006 Posts: 248 Member: 280989 Status: Offline Thanks Meter: 9	hello,evrybody. i have nokia 2600 its working but some time its show TEST MODE i do ui setting but its not solve....pls help me. thanks