P900 problems in flashing PDA Irma Verifying checksum... - GSM-Forum

Burnt Cobba · 02-03-2005, 07:42

hi mates.

Got a P900. It came in with a partly smashed screen. Replaced it with an original one and display was ok. Then after it powered up started to reset itself as usual saying to improve performance.

Used these files for flashing :-

p900_r5a09_cxc162024.pd1
p900_r5a07_cda162003_14_img.pd2
p900_r5a07_cda162003_14_bin.pd3

and got this log :-

Remove and Put Back Battery, if PDA do not Boot
PDA 1st Boot Ok
PDA 2nd Boot Ok
BTM 1st Boot Ok
BTM 2nd Boot Ok
BTM Flash Written: 335856 byte(s), Time: 00:15
Chk_Fail: 000000000000000000 D664 0
PDA Flash Writing Failed: 91AA4000, Chk_Fail
PDA Flashing Failed, Time: 12:40

Anything i can do please? Before the screen was changed it was not doing this behaviour.

thanks for any help and guidance
al

danielkhaw · 02-04-2005, 03:25

1st : dont flash btm
2nd : if only write pda also chk_fail,reboil your cpu and flash can help

muppet · 02-04-2005, 03:26

Yes, you have a faulty bluetooth hardware. I have also seen this problem.

Burnt Cobba · 02-04-2005, 23:20

but BT flashes ok. It seems the flashing of the User Data that is giving problems.

i cant understand what changing the screen has to do with all this... before was working ok

how unlucky damn

jabran200 · 02-05-2005, 16:09

this worked for a p800 once i remoced all the parts i.e just the board no chassis etc and flashed it worked perfect.

vanhh · 01-31-2007, 13:08

Quote:

Originally Posted by Burnt Cobba

hi mates.

Got a P900. It came in with a partly smashed screen. Replaced it with an original one and display was ok. Then after it powered up started to reset itself as usual saying to improve performance.

....

I have P908 the same prob of U , My fone is auto Resert because Memory full but i can't delete or uninstall app, so I formart internal Disk, but it is still and get failed when flash PDA

P908_R5A09_CXC162023.pd1
P908_R5A09_CDA162003_10_img.pd2
P908_R5A09_CDA162003_10_bin.pd3
get this"
PDA 1st Boot Ok
PDA 2nd Boot Ok
Chk_Fail: 000000000000000000 5CEF 0
PDA Flash Writing Failed: 917FB000, Chk_Fail
PDA Flashing Failed, Time: 11:16

here my fone info:
Please Connect Cable to Switched-Off Mobile
Mcu_Id: 5B 08 02 01 FF FF FF FF
Secure Boot Ok, Time: 00:50
Fl_Id : 00898862 Intel 28F320W18T {2}
Blk_0 : 330000
IMEI : 351965-00-xxxxxx-x
ULock : Factory_Off : 0000
***** : "New" GDFS SA Layout, Cannot Calculate Codes
LockSt: Sim_Locks Open, Mcc+Mnc: FFF-FF, 5555 55
Mcu_Sw: R3C006 prgCXC162022
BackUp:'P908_35196500xxxxxxx_uns_30_01_2007_6_37_0 3_PM.sim'
Blk_0 : 330000
IMEI : 351965-00-xxxxxx-x
ULock : Factory_Off : 0000
***** : "New" GDFS SA Layout, Cannot Calculate Codes
LockSt: Sim_Locks Open, Mcc+Mnc: FFF-FF, 5555 55
Mcu_Sw: R3C006 prgCXC162022

How to flash PDA with N-Box?
Thanks!

mike67 · 11-02-2007, 03:31

Can I flash P900 with P908 files ... ?? please someone answer me

thnks
Mike

::Yasir:: · 01-07-2008, 12:03

Hmm, Bt problem with UFS_RTP and not P900/P800. Mine no network/signal dropping...

Burnt Cobba · 01-07-2008, 23:47

sorry was a long time ago.... back in 2005 i dont remember about it mate.

gsmsikar · 06-03-2008, 10:22

please help me , i am also getting this messege on a p908...

PDA 1st Boot Ok
PDA 2nd Boot Ok
Chk_Fail: 020900000000000000 824B 5
PDA Flash Writing Failed: 91A75000, Chk_Fail
PDA Flashing Failed, Time: 12:14

the set was working ok , now it is dead ..

help

thanks

gsmsikar · 06-03-2008, 10:24

i am also getting the same error messsage when i try to flash a p908 ..

please help me ..

PDA 1st Boot Ok
PDA 2nd Boot Ok
Chk_Fail: 020900000000000000 824B 5
PDA Flash Writing Failed: 91A75000, Chk_Fail
PDA Flashing Failed, Time: 12:14

the set is dead now , but was working before ..

help

gsmsikar · 06-06-2008, 06:09

someone please help me ..

02-03-2005, 07:42	#1 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	P900 problems in flashing PDA Irma Verifying checksum... hi mates. Got a P900. It came in with a partly smashed screen. Replaced it with an original one and display was ok. Then after it powered up started to reset itself as usual saying to improve performance. Used these files for flashing :- p900_r5a09_cxc162024.pd1 p900_r5a07_cda162003_14_img.pd2 p900_r5a07_cda162003_14_bin.pd3 and got this log :- Remove and Put Back Battery, if PDA do not Boot PDA 1st Boot Ok PDA 2nd Boot Ok BTM 1st Boot Ok BTM 2nd Boot Ok BTM Flash Written: 335856 byte(s), Time: 00:15 Chk_Fail: 000000000000000000 D664 0 PDA Flash Writing Failed: 91AA4000, Chk_Fail PDA Flashing Failed, Time: 12:40 Anything i can do please? Before the screen was changed it was not doing this behaviour. thanks for any help and guidance al

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem in flashing k790i in cuiser	M.YASIR	Cruiser Suite	3	04-30-2007 09:41
problem in flashing nokia 2300	manrew	Griffin	10	07-07-2004 05:34
Problem in flashing 7650 with griffin!	chinex14	Griffin	11	10-04-2003 02:36
Problem in flash reading 000122da 5110?	FunLog	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	04-06-2001 09:28

02-04-2005, 03:25	#2 (permalink)
danielkhaw Freak Poster Join Date: Apr 2002 Location: Malaysia Age: 44 Posts: 436 Member: 10977 Status: Offline Thanks Meter: 55	1st : dont flash btm 2nd : if only write pda also chk_fail,reboil your cpu and flash can help

02-04-2005, 03:26	#3 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	Yes, you have a faulty bluetooth hardware. I have also seen this problem.

02-04-2005, 23:20	#4 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	but BT flashes ok. It seems the flashing of the User Data that is giving problems. i cant understand what changing the screen has to do with all this... before was working ok how unlucky damn

02-05-2005, 16:09	#5 (permalink)
jabran200 Freak Poster Join Date: Jun 2004 Posts: 295 Member: 68213 Status: Offline Thanks Meter: 1	this worked for a p800 once i remoced all the parts i.e just the board no chassis etc and flashed it worked perfect.

11-02-2007, 03:31	#7 (permalink)
mike67 No Life Poster Join Date: Nov 2005 Location: USA Posts: 1,163 Member: 197538 Status: Offline Thanks Meter: 97	Can I flash P900 with P908 files ... ?? please someone answer me thnks Mike

01-07-2008, 12:03	#8 (permalink)
::Yasir:: No Life Poster Join Date: Dec 2003 Age: 36 Posts: 891 Member: 47281 Status: Offline Thanks Meter: 17	Hmm, Bt problem with UFS_RTP and not P900/P800. Mine no network/signal dropping...

01-07-2008, 23:47	#9 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	sorry was a long time ago.... back in 2005 i dont remember about it mate.

06-03-2008, 10:22	#10 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	please help me , i am also getting this messege on a p908... PDA 1st Boot Ok PDA 2nd Boot Ok Chk_Fail: 020900000000000000 824B 5 PDA Flash Writing Failed: 91A75000, Chk_Fail PDA Flashing Failed, Time: 12:14 the set was working ok , now it is dead .. help thanks

06-03-2008, 10:24	#11 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	i am also getting the same error messsage when i try to flash a p908 .. please help me .. PDA 1st Boot Ok PDA 2nd Boot Ok Chk_Fail: 020900000000000000 824B 5 PDA Flash Writing Failed: 91A75000, Chk_Fail PDA Flashing Failed, Time: 12:14 the set is dead now , but was working before .. help

06-06-2008, 06:09	#12 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	someone please help me ..