samsung X450 - GSM-Forum

nidal01 · 10-14-2006, 16:54

any bady know why X450 working before flashing,and now flashing till 69%,
I am tired,I flashed with all manuall in the form,nothing change,the phone staying die and stop at 68%

mail0 · 10-18-2006, 02:40

why you flashing working phone? check for crazes into glue near the ICs

..::AppleLinks::.. · 11-13-2006, 10:02

X450 DEAD AFTER FLASH.PHONE WAS WORKING BUT ONLY PHONE DO CALL BUSY, SO IF FLASH IT WITH UFS V2.0.2.AND DEAD.

1st Boot Ok, McuId: 000603BC, Rom: 00004545, 3-2.2
Fll Boot Ok, Vers: 4.13, sceptre3_sgh_hw4_8.sre
Flash1: Fl_Id: 00898855_01 - Intel 28F640W30B
Baud Rate Set: 460800 bps
Clos: eom.CLOS+ok!eom.
Bad data frame: 0x0004->0x0008
Write Failed at: 0x003C4000.

spinbaaz.com · 12-12-2006, 13:24

Quote:

Originally Posted by ..::AppleLinks::..

X450 DEAD AFTER FLASH.PHONE WAS WORKING BUT ONLY PHONE DO CALL BUSY, SO IF FLASH IT WITH UFS V2.0.2.AND DEAD.

1st Boot Ok, McuId: 000603BC, Rom: 00004545, 3-2.2
Fll Boot Ok, Vers: 4.13, sceptre3_sgh_hw4_8.sre
Flash1: Fl_Id: 00898855_01 - Intel 28F640W30B
Baud Rate Set: 460800 bps
Clos: eom.CLOS+ok!eom.
Bad data frame: 0x0004->0x0008
Write Failed at: 0x003C4000.

same problem with me please help......................................

~mr_Ten$ion~ · 12-12-2006, 19:29

Bro jst baud rate set ___115200 ... then try .. its from china Fones & its has Its specail file which works On it .... but u try to Low Speed & try ... possible it may help u .....Thanx
Br

Quote:

Originally Posted by ..::AppleLinks::..

X450 DEAD AFTER FLASH.PHONE WAS WORKING BUT ONLY PHONE DO CALL BUSY, SO IF FLASH IT WITH UFS V2.0.2.AND DEAD.

1st Boot Ok, McuId: 000603BC, Rom: 00004545, 3-2.2
Fll Boot Ok, Vers: 4.13, sceptre3_sgh_hw4_8.sre
Flash1: Fl_Id: 00898855_01 - Intel 28F640W30B
Baud Rate Set: 460800 bps
Clos: eom.CLOS+ok!eom.
Bad data frame: 0x0004->0x0008
Write Failed at: 0x003C4000.

trieubk · 12-13-2006, 03:02

X450 from China = X426 or X427 (changed band to 900Mhz).
I'm sure your phone will die if you try to flash it with X450 flashfile

~mr_Ten$ion~ · 12-13-2006, 06:15

So u hve Specail flash File ..... i thk X427 flashfile is working on CHina Fone ...
BR

Quote:

Originally Posted by trieubk

X450 from China = X426 or X427 (changed band to 900Mhz).
I'm sure your phone will die if you try to flash it with X450 flashfile

10-14-2006, 16:54	#1 (permalink)
nidal01 Insane Poster Join Date: Mar 2006 Posts: 86 Member: 248553 Status: Offline Thanks Meter: 6	samsung X450 any bady know why X450 working before flashing,and now flashing till 69%, I am tired,I flashed with all manuall in the form,nothing change,the phone staying die and stop at 68%

11-13-2006, 10:02	#3 (permalink)
..::AppleLinks::.. No Life Poster Join Date: Apr 2006 Location: APPLE i Center Age: 39 Posts: 1,751 Member: 264667 Status: Offline Sonork: 100.105892 Thanks Meter: 481	Hi X450 DEAD AFTER FLASH.PHONE WAS WORKING BUT ONLY PHONE DO CALL BUSY, SO IF FLASH IT WITH UFS V2.0.2.AND DEAD. 1st Boot Ok, McuId: 000603BC, Rom: 00004545, 3-2.2 Fll Boot Ok, Vers: 4.13, sceptre3_sgh_hw4_8.sre Flash1: Fl_Id: 00898855_01 - Intel 28F640W30B Baud Rate Set: 460800 bps Clos: eom.CLOS+ok!eom. Bad data frame: 0x0004->0x0008 Write Failed at: 0x003C4000.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Samsung X450 unlock	uragan	Trident/AGERE Platform	14	01-25-2011 13:40
samsung x450 unlock and flash ??	tekkelinc	SYSOL Platform	43	07-19-2004 18:01
samsung x450,x400 & p107	empire1	SYSOL Platform	0	06-14-2004 16:47
Samsung X450 unlock solution without cable?	allecor	VLSI, Conexant, Skyworks and Old Models	8	05-02-2004 13:48
twister and samsung x450	tekkelinc	Twisterflasher	0	04-27-2004 07:53

10-18-2006, 02:40	#2 (permalink)
mail0 No Life Poster Join Date: Feb 2006 Location: URL - UnlockRepairLandia Age: 41 Posts: 866 Member: 236218 Status: Offline Thanks Meter: 35	why you flashing working phone? check for crazes into glue near the ICs

12-13-2006, 03:02	#6 (permalink)
trieubk No Life Poster Join Date: May 2005 Location: Vietnam Age: 50 Posts: 1,485 Member: 149256 Status: Offline Thanks Meter: 285	X450 from China = X426 or X427 (changed band to 900Mhz). I'm sure your phone will die if you try to flash it with X450 flashfile