T610 can't flash MODEM - GSM-Forum

Mehvishal · 03-05-2005, 07:19

hi friends
please help

Trying to flash a T610 which freeze an startup

But problem i get ie error when flashing MODEM

please see below

Please Connect Cable to Switched-Off Mobile
Mcu_Id: 5B 08 02 01 FF FF FF FF
Secure Boot Ok, Time: 00:34
Fl_Id : 00898864 Intel 28F640W18T {2}
Blk_0 : B40000
IMEI :
ULock : Auto : 8193
***** : "New" GDFS SA Layout, Cannot Calculate Codes
LockSt: Sim_Locks Open, Mcc+Mnc: FFF-FF, 5555 55
Mcu_Sw: R1A081 prgCXC125585_CHINA_2
BackUp:'T610_35125400xxxxxxx_uns_3_5_05_10_10_34_A M.sim'
Modem Flash Writing Failed: M_Boot 0000
Error Break, Total Time: 01:00

IMEI number is OK i have just removed it for display in forum.

can anyone help me please?

WBR
Mehvishal

Bohosh · 03-05-2005, 09:18

This is a old problem!!!!!Maybe Saras will fix it in next update!!!!!

flavioro · 03-09-2005, 18:38

I do it once after a 100 of tries with ufs and div in clasic way, using ufs and without baterry on phone. Just data cable and "+" from special SE cable.

Try it, maybe help.

B.R.

johnny_liang · 03-09-2005, 19:35

I think this error come form bt part you just check bottom right side infront of your pcb you'll see flash ic this for bt/ modem part just change it

naderhacker · 03-09-2005, 20:05

hi man
100000000000000000000% HW problem just flash the right mcu
get it's ver from phone back
WBR

03-05-2005, 07:19	#1 (permalink)
Mehvishal No Life Poster Join Date: Nov 2001 Location: Mauritius Age: 47 Posts: 1,116 Member: 7482 Status: Offline Thanks Meter: 24	T610 can't flash MODEM hi friends please help Trying to flash a T610 which freeze an startup But problem i get ie error when flashing MODEM please see below Please Connect Cable to Switched-Off Mobile Mcu_Id: 5B 08 02 01 FF FF FF FF Secure Boot Ok, Time: 00:34 Fl_Id : 00898864 Intel 28F640W18T {2} Blk_0 : B40000 IMEI : ULock : Auto : 8193 ***** : "New" GDFS SA Layout, Cannot Calculate Codes LockSt: Sim_Locks Open, Mcc+Mnc: FFF-FF, 5555 55 Mcu_Sw: R1A081 prgCXC125585_CHINA_2 BackUp:'T610_35125400xxxxxxx_uns_3_5_05_10_10_34_A M.sim' Modem Flash Writing Failed: M_Boot 0000 Error Break, Total Time: 01:00 IMEI number is OK i have just removed it for display in forum. can anyone help me please? WBR Mehvishal

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
t610 can't flash modem	oxs_juragan	Sony Ericsson	2	05-15-2006 05:34
T630 - with new RSA - can't flash modem	GSMBlade	Cruiser Suite	12	05-13-2005 06:57
T610 can't flash modem file	Lonegunman	UFS2 + UFS3-Tornadoflasher	9	02-22-2005 21:09
T630 - new RSA - can't flash modem	GSMBlade	Sony Ericsson	0	12-02-2004 10:59
T39 can't flash modem file	Mehvishal	UFS2 + UFS3-Tornadoflasher	10	05-21-2004 09:14

03-05-2005, 09:18	#2 (permalink)
Bohosh No Life Poster Join Date: Aug 2002 Posts: 1,948 Member: 14741 Status: Offline Thanks Meter: 119	This is a old problem!!!!!Maybe Saras will fix it in next update!!!!!

03-09-2005, 18:38	#3 (permalink)
flavioro Freak Poster Join Date: Oct 2001 Location: Romania Age: 54 Posts: 206 Member: 6797 Status: Offline Thanks Meter: 14	I do it once after a 100 of tries with ufs and div in clasic way, using ufs and without baterry on phone. Just data cable and "+" from special SE cable. Try it, maybe help. B.R.

03-09-2005, 19:35	#4 (permalink)
johnny_liang No Life Poster Join Date: Mar 2003 Location: Nowhere Age: 44 Posts: 636 Member: 25067 Status: Offline Thanks Meter: 81	I think this error come form bt part you just check bottom right side infront of your pcb you'll see flash ic this for bt/ modem part just change it

03-09-2005, 20:05	#5 (permalink)
naderhacker Freak Poster Join Date: Apr 2001 Location: EVRYWERE Posts: 492 Member: 4365 Status: Offline Thanks Meter: 39	hi man 100000000000000000000% HW problem just flash the right mcu get it's ver from phone back WBR