ufs boot error solution 100% tested. - GSM-Forum

adityajha · 11-10-2010, 12:05

for those who have this kind of problem coming in ur ufs3.

UFSx Device: UFS3 SarasSoft, USB S/N: ------
-- Setup Ok
--Login fail.

Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- UFSx Device: UFS3 SarasSoft, USB S/N: -----
-- Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- Target Id : 62 CF 0 0
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: Xx.x C4EEC8, ,
-- UFSx S/N : --------
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TWISTER

orrrrrrrr

than u can fix ur box by this solution...

1st install pony-pong
2nd make connection of miso,mosi,reset,sack of Atmaega ic of ufs box.
u can see ways here also

now do connection in pony pong like
1st select AVR micro than Atmega8
now click on seup and go in interface setup asn select parallel - Avr ISPI/IO
now click on probr if test is ok than click ok
New Microsoft PowerPoint Presentation.ppt

now click on erese all.
now open programe memory and open device memory
u can get it from hereufs_repair_BIN.rar

now click on command and click "write all"

after sucess fully this operation open HWK update client and see status of ur box and also update box frimwere.if any oter error is coming then post in this thread.
or u can also meet me on [email protected]

ur box will be come back again.

iolejoi · 11-14-2010, 04:23

after did this may ufs is ok now but when i use update client hwk may hwk is not detected or dead..........but first hwk is detected after repairing ufs hwk wont detect now....

ABDULMANAN · 11-14-2010, 06:46

this fault come mostly by cable first change cable

adityajha · 11-14-2010, 07:44

Quote:

Originally Posted by iolejoi

after did this may ufs is ok now but when i use update client hwk may hwk is not detected or dead..........but first hwk is detected after repairing ufs hwk wont detect now....

1st changed cable if still showing hwk not connected than use hwk_EMU_good tool than use HWK activator tool ,
u can download from hereUFS-3__HWK_REPAIRING_TOOLS_www.free-gsm-unlock.com.rar
1st write good hek_emu by hwk_EMU_good tool
2nd activate ur ufs for HWK HWK activator tool
ur prob will we solve.

ORANGE MOB · 11-14-2010, 07:52

good and noice post usefull for other

2stone.sunny · 03-13-2011, 21:14

Quote:

Originally Posted by adityajha

for those who have this kind of problem coming in ur ufs3.

UFSx Device: UFS3 SarasSoft, USB S/N: ------
-- Setup Ok
--Login fail.

Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- UFSx Device: UFS3 SarasSoft, USB S/N: -----
-- Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- Target Id : 62 CF 0 0
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.

Sir how to
-- UFSx Firmw.: Xx.x C4EEC8, ,
-- UFSx S/N : --------
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TWISTER

orrrrrrrr

than u can fix ur box by this solution...

1st install pony-pong
2nd make connection of miso,mosi,reset,sack of Atmaega ic of ufs box.
u can see ways here also

now do connection in pony pong like
1st select AVR micro than Atmega8
now click on seup and go in interface setup asn select parallel - Avr ISPI/IO
now click on probr if test is ok than click ok
New Microsoft PowerPoint Presentation.ppt

now click on erese all.
now open programe memory and open device memory
u can get it from hereufs_repair_BIN.rar

now click on command and click "write all"

after sucess fully this operation open HWK update client and see status of ur box and also update box frimwere.if any oter error is coming then post in this thread.
or u can also meet me on [email protected]

ur box will be come back again.

Sir how to make connection of miso,mosi,reset,sack of Atmaega ic of ufs box.
I can not understand from the pdf attachment.

Please explain with a picture of ufs box...........

adityajha · 03-14-2011, 08:29

Sir how to make connection of miso,mosi,reset,sack of Atmaega ic of ufs box.
I can not understand from the pdf attachment.

Please explain with a picture of ufs box...........[/QUOTE]

read pdf file carefully everything is there or meet me on yahoo.

omkar3268 · 06-06-2011, 09:02

Quote:

Originally Posted by adityajha

for those who have this kind of problem coming in ur ufs3.

UFSx Device: UFS3 SarasSoft, USB S/N: ------
-- Setup Ok
--Login fail.

Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- UFSx Device: UFS3 SarasSoft, USB S/N: -----
-- Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- Target Id : 62 CF 0 0
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: Xx.x C4EEC8, ,
-- UFSx S/N : --------
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TWISTER

orrrrrrrr

than u can fix ur box by this solution...

1st install pony-pong
2nd make connection of miso,mosi,reset,sack of Atmaega ic of ufs box.
u can see ways here also

now do connection in pony pong like
1st select AVR micro than Atmega8
now click on seup and go in interface setup asn select parallel - Avr ISPI/IO
now click on probr if test is ok than click ok
New Microsoft PowerPoint Presentation.ppt

now click on erese all.
now open programe memory and open device memory
u can get it from hereufs_repair_BIN.rar

now click on command and click "write all"

after sucess fully this operation open HWK update client and see status of ur box and also update box frimwere.if any oter error is coming then post in this thread.
or u can also meet me on [email protected]

ur box will be come back again.

help me too si r.................

Davidson · 07-24-2011, 08:09

Wht do i do.
Reset Failed, Trying to Repair UFS ...
-- Boot Fail: C:\Program Files\Common Files\SarasSoft\Ufs.sdb
-- UFSx Device: UFS2 SarasSoft, USB S/N: ------
-- Reset Failed, Trying to Repair UFS ...
-- Boot Fail: C:\Program Files\Common Files\SarasSoft\Ufs.sdb

salim.hitech · 11-07-2013, 17:37

Box do not connected pc

juan manuel · 11-09-2013, 14:10

Very Goood Solution. Great Work 100%. thk bro

sylvainplanet · 10-04-2014, 01:41

MY TORNADO WILL NOT boot with INTINITY BEST

sylvainplanet · 10-04-2014, 02:10

MY TORNADO WILL NOT boot with INTINITY BEST IN PORT COM.

UFS Boot Enter error (05CC)
UFS S/N TMA13745526 boot error...
Connect phone on selected interface...

QUE FAIRE?

ch_shahraz786 · 12-14-2014, 11:10

Ftd: Ufs2xx.dll 3.2.7, Ufs2xx.sys 2.8.30
Box: 1 Location: 17 Serial: 98558
Box Boot Failed
Bad IX: ABCD
Failed: -101
HID Number Corrupted, Try to Use [Update Box]

Box: 1 Location: 17 Serial: 98558
Box Boot Failed
Fatal BOOT Error, Need Repair Box, Contact Distributor

aditya111184 · 02-24-2017, 14:39

i am facing this problem on ufs3 plz help.

11-10-2010, 12:05	#1 (permalink)
adityajha No Life Poster Join Date: Dec 2009 Location: siliguri,india Age: 31 Posts: 665 Member: 1183572 Status: Offline Thanks Meter: 203	ufs boot error solution 100% tested. for those who have this kind of problem coming in ur ufs3. UFSx Device: UFS3 SarasSoft, USB S/N: ------ -- Setup Ok --Login fail. Reset Failed, Trying to Repair UFS ... -- Boot: 62 CF -- UFSx Device: UFS3 SarasSoft, USB S/N: ----- -- Reset Failed, Trying to Repair UFS ... -- Boot: 62 CF -- Target Id : 62 CF 0 0 -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003. -- UFSx Firmw.: Xx.x C4EEC8, , -- UFSx S/N : -------- -- Features : 00000001 -- Licence 5 : True -- UFSx Vendor: TWISTER orrrrrrrr than u can fix ur box by this solution... 1st install pony-pong 2nd make connection of miso,mosi,reset,sack of Atmaega ic of ufs box. u can see ways here also now do connection in pony pong like 1st select AVR micro than Atmega8 now click on seup and go in interface setup asn select parallel - Avr ISPI/IO now click on probr if test is ok than click ok New Microsoft PowerPoint Presentation.ppt now click on erese all. now open programe memory and open device memory u can get it from hereufs_repair_BIN.rar now click on command and click "write all" after sucess fully this operation open HWK update client and see status of ur box and also update box frimwere.if any oter error is coming then post in this thread. or u can also meet me on [email protected] ur box will be come back again.

11-07-2013, 17:37	#10 (permalink)
salim.hitech Junior Member Join Date: Jul 2009 Posts: 5 Member: 1080939 Status: Offline Thanks Meter: 0	Ufs hwk Box do not connected pc

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anybody know solution	Robi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-10-2014 12:35
where to find a working program all they have some errors ??	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	12-12-2012 13:26
Solution for GSM phones!?!?!?!?	todosije	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	12-16-2010 05:52
error (1002) simlock3.dll winopen	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-28-1999 15:57
!!!!!!TO ALL NOKIA 51XX/61XX SP LOCKS 1,2,3,4 SOLUTION latest news!!!!!	spterminator	Main Sales Section	2	08-13-1999 05:55

11-14-2010, 04:23	#2 (permalink)
iolejoi No Life Poster Join Date: Sep 2004 Age: 49 Posts: 539 Member: 81501 Status: Offline Thanks Meter: 41	after did this may ufs is ok now but when i use update client hwk may hwk is not detected or dead..........but first hwk is detected after repairing ufs hwk wont detect now....

11-14-2010, 06:46	#3 (permalink)
ABDULMANAN No Life Poster Join Date: Apr 2008 Location: LOVE A L L AH LOVE ALQURAN Posts: 1,944 Member: 754324 Status: Offline Sonork: LOVE MOHAMMAD (S.A.W) Thanks Meter: 500	this fault come mostly by cable first change cable

11-14-2010, 07:52	#5 (permalink)
ORANGE MOB Product Supporter Join Date: Nov 2010 Location: Every where Posts: 2,936 Member: 1549240 Status: Offline Thanks Meter: 1,130	good and noice post usefull for other

03-14-2011, 08:29	#7 (permalink)
adityajha No Life Poster Join Date: Dec 2009 Location: siliguri,india Age: 31 Posts: 665 Member: 1183572 Status: Offline Thanks Meter: 203	Sir how to make connection of miso,mosi,reset,sack of Atmaega ic of ufs box. I can not understand from the pdf attachment. Please explain with a picture of ufs box...........[/QUOTE] read pdf file carefully everything is there or meet me on yahoo.

07-24-2011, 08:09	#9 (permalink)
Davidson Junior Member Join Date: Aug 2005 Age: 48 Posts: 29 Member: 168512 Status: Offline Thanks Meter: 0	Wht do i do. Reset Failed, Trying to Repair UFS ... -- Boot Fail: C:\Program Files\Common Files\SarasSoft\Ufs.sdb -- UFSx Device: UFS2 SarasSoft, USB S/N: ------ -- Reset Failed, Trying to Repair UFS ... -- Boot Fail: C:\Program Files\Common Files\SarasSoft\Ufs.sdb

11-09-2013, 14:10	#11 (permalink)
juan manuel Junior Member Join Date: Jul 2008 Location: posadas, misiones, ARGENTINA Posts: 15 Member: 815917 Status: Offline Thanks Meter: 1	Very Goood Solution. Great Work 100%. thk bro

10-04-2014, 01:41	#12 (permalink)
sylvainplanet Junior Member Join Date: May 2014 Posts: 6 Member: 2192481 Status: Offline Thanks Meter: 0	MY TORNADO WILL NOT boot with INTINITY BEST

10-04-2014, 02:10	#13 (permalink)
sylvainplanet Junior Member Join Date: May 2014 Posts: 6 Member: 2192481 Status: Offline Thanks Meter: 0	MY TORNADO WILL NOT boot with INTINITY BEST IN PORT COM. UFS Boot Enter error (05CC) UFS S/N TMA13745526 boot error... Connect phone on selected interface... QUE FAIRE?

12-14-2014, 11:10	#14 (permalink)
ch_shahraz786 Junior Member Join Date: Mar 2008 Posts: 21 Member: 721830 Status: Offline Thanks Meter: 1	Ftd: Ufs2xx.dll 3.2.7, Ufs2xx.sys 2.8.30 Box: 1 Location: 17 Serial: 98558 Box Boot Failed Bad IX: ABCD Failed: -101 HID Number Corrupted, Try to Use [Update Box] Box: 1 Location: 17 Serial: 98558 Box Boot Failed Fatal BOOT Error, Need Repair Box, Contact Distributor

02-24-2017, 14:39	#15 (permalink)
aditya111184 Junior Member Join Date: Mar 2014 Posts: 21 Member: 2152730 Status: Offline Thanks Meter: 4	i am facing this problem on ufs3 plz help.