UFS Torando Box not Booting - GSM-Forum

Linkz · 10-06-2006, 16:26

Hi Guys, i recently used the directcom software on my ufs to unlock a phone which was not succcessful. however i tried to get my box back to its original state and that did not work out. i used the ufs3 tools software but i kept on getting an error saying unable to flash eeprom. i kept on trying but still nothing. then i tried the ufs maintenance v20 software nothing worked out.

now when i try to connect my box to the ufs3 tools its saying device is unable to boot.

also i noticed the power led is not lit on the box only the usb led.

can someone tell how this can be repaired.

many thanks in advance

note: forget sending it back to reseller because i am from the caribbean and i bought this box in china.

tommy15979 · 10-06-2006, 17:54

i solved in this way:
Open software "UFS3 tools v.2.69"
Click on 'write firmware' and 'write eeprom'
select firmware (2.5 or 2.6)
click on "connect" and then on "fix & update button"

Linkz · 10-06-2006, 18:03

ufstools is not able to connect to the box.

Linkz · 10-08-2006, 12:44

Thanks to Stanner_Austin "The Indian" i was able to get my ufs back again. its was the mcu that just need some attention.

thanks a million indian.

10-06-2006, 16:26	#1 (permalink)
Linkz Freak Poster Join Date: Feb 2005 Location: Into the Unknown Posts: 413 Member: 121461 Status: Offline Thanks: 153 Thanked 25 Times in 10 Posts	UFS Torando Box not Booting Hi Guys, i recently used the directcom software on my ufs to unlock a phone which was not succcessful. however i tried to get my box back to its original state and that did not work out. i used the ufs3 tools software but i kept on getting an error saying unable to flash eeprom. i kept on trying but still nothing. then i tried the ufs maintenance v20 software nothing worked out. now when i try to connect my box to the ufs3 tools its saying device is unable to boot. also i noticed the power led is not lit on the box only the usb led. can someone tell how this can be repaired. many thanks in advance note: forget sending it back to reseller because i am from the caribbean and i bought this box in china.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
tornado ufs-3 box not support	alu2hs	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	5	10-10-2008 18:16
ufs lg do not boot	antm	Twisterflasher	2	04-25-2007 12:08
ufs 3 box not working can any one solve my problem	Y2ksalman	UFS2 + UFS3-Tornadoflasher	10	01-14-2007 07:13
se mt-box not boot t290i and t230	tobi2	MT-BOX	2	11-30-2005 12:28

10-06-2006, 17:54	#2 (permalink)
tommy15979 Junior Member Join Date: Aug 2005 Age: 34 Posts: 20 Member: 176236 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	i solved in this way: Open software "UFS3 tools v.2.69" Click on 'write firmware' and 'write eeprom' select firmware (2.5 or 2.6) click on "connect" and then on "fix & update button"

10-08-2006, 12:44	#4 (permalink)
Linkz Freak Poster Join Date: Feb 2005 Location: Into the Unknown Posts: 413 Member: 121461 Status: Offline Thanks: 153 Thanked 25 Times in 10 Posts	Thanks to Stanner_Austin "The Indian" i was able to get my ufs back again. its was the mcu that just need some attention. thanks a million indian.