X460 dead! - GSM-Forum

chrisonic · 09-21-2005, 04:32

Hi

Got a Samsung X460 with the following problem:

At first, when I got the phone, sometimes it didn´t power on, sometimes it did, but froze after some seconds. So I tried to flash it with flashfile from support site (MCU + TFS). After several trials (UFS kept giving me error "NAND format failed"/"MCU write fail" for a long while) I managed to flash it, but phone couldn´t power on at all after this. Now I flashed it again with other flashfile and with lower speed, but got same problem: phone does not power on at all (before those 2 flashing procedures, at least it sometimes powered on and froze).

Also it does not enter TAT mode.
The only thing it allows me to do is flashing.

Is there any solution for this? Could someone help?

BR

chrisonic · 09-23-2005, 22:30

Nobody knows solution for this?

petar2258 · 09-24-2005, 00:31

try to flash with version 14r of ufs_sams, may be newer versions are buggy
with this version i successfuly flashed this model, if not help - may be your phone has hardware fault

chrisonic · 09-25-2005, 18:48

Quote:

Originally Posted by petar2258

try to flash with version 14r of ufs_sams, may be newer versions are buggy
with this version i successfuly flashed this model, if not help - may be your phone has hardware fault

Well, 14r is the version I used to flash it... Anyway, thanks for you reply.

BR

shoag12345 · 09-25-2005, 21:52

chack the phone hardware it is ( x460 ) or ( x468 ) under sim .

09-21-2005, 04:32	#1 (permalink)
chrisonic Freak Poster Join Date: Aug 2004 Age: 47 Posts: 355 Member: 77446 Status: Offline Thanks Meter: 8	X460 dead! Hi Got a Samsung X460 with the following problem: At first, when I got the phone, sometimes it didn´t power on, sometimes it did, but froze after some seconds. So I tried to flash it with flashfile from support site (MCU + TFS). After several trials (UFS kept giving me error "NAND format failed"/"MCU write fail" for a long while) I managed to flash it, but phone couldn´t power on at all after this. Now I flashed it again with other flashfile and with lower speed, but got same problem: phone does not power on at all (before those 2 flashing procedures, at least it sometimes powered on and froze). Also it does not enter TAT mode. The only thing it allows me to do is flashing. Is there any solution for this? Could someone help? BR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
x460 dead	ziko	UFS2 + UFS3-Tornadoflasher	2	04-19-2007 17:25
Elco help x460 dead	gadzetxp	NSPRO	4	10-03-2005 21:12
x460 dead by unlock as x640	reason	Twisterflasher	7	09-11-2005 11:10
Samsung X460 dead after water damage	duha2	Samsung Hardware Repair	3	08-16-2005 08:38
x460 dead speaker	amsterdamas	Samsung Hardware Repair	3	06-10-2005 14:21

09-23-2005, 22:30	#2 (permalink)
chrisonic Freak Poster Join Date: Aug 2004 Age: 47 Posts: 355 Member: 77446 Status: Offline Thanks Meter: 8	Nobody knows solution for this?

09-24-2005, 00:31	#3 (permalink)
petar2258 Freak Poster Join Date: Jul 2004 Location: Burgas, Bulgaria Age: 55 Posts: 254 Member: 75528 Status: Offline Thanks Meter: 5	try to flash with version 14r of ufs_sams, may be newer versions are buggy with this version i successfuly flashed this model, if not help - may be your phone has hardware fault

09-25-2005, 21:52	#5 (permalink)
shoag12345 Freak Poster Join Date: Dec 2004 Location: bangladesh Age: 48 Posts: 117 Member: 99581 Status: Offline Thanks Meter: 1	chack the phone hardware it is ( x460 ) or ( x468 ) under sim .