spv handset code - GSM-Forum

smartymarti · 03-29-2004, 16:14

have a orange spv unlocked but need to resetr the handset code or find it out any ideas any one

Lonegunman · 03-29-2004, 17:46

Quote:

Originally Posted by smartymarti

have a orange spv unlocked but need to resetr the handset code or find it out any ideas any one

Hard reset but you will lose all the info that is on the phone (bit like a format), only way as far as I know.

smartymarti · 03-29-2004, 18:11

Quote:

Originally Posted by Lonegunman

Hard reset but you will lose all the info that is on the phone (bit like a format), only way as far as I know.

cheers but how do ya do that then ???

ali-g-string · 03-05-2005, 12:11

Yep how do we do that on spv c500?

bungle_uk · 03-05-2005, 12:18

Here's the procedure for formatting your SPV (works on most versions, not tested on C500):

Check that there is no SD or MMC card in your SPV or that the protective plastic has been removed
Switch off your SPV
Remove the battery, then replace
Start up your SPV by holding down the voice memo record button and the on button
After the "Card Found" message, an invitation appears,
press on the joystick until the "Canary" menu is displayed (1-2 seconds)
Confirm choice number 8: "Erase IPSM"
You know the procedure is successful when you see the word "PASSED" appear at the bottom of the screen.
Confirm by pressing on the joystick, you will then find yourself back at the menu.
Remove the battery, wait for a few moments, then replace.
Start up your SPV as normal.
It will then go through the initialisation cycle..
which takes a few minutes...

ali-g-string · 03-05-2005, 12:19

thanks bungle mate

working on c500

1. Press and hold soft1 and soft2 keys.
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep hold soft1 and soft2 keys.
3. Later, screen shoould show instructions to ask user to press '0' key to reset to factory default.
4. Press '0' within the timeout period, which is only several seconds only.
5. If no instruction is shown on the screen, repeat steps 1 to 4.
The timing is sensitive.

bungle_uk · 03-05-2005, 12:25

Thanks mate, I'll put that in my big black book for future ref.

br

elabasimlock · 03-21-2006, 01:53

no work for my
he give only 1 and 2
no 0

03-29-2004, 16:14	#1 (permalink)
smartymarti No Life Poster Join Date: Oct 2001 Location: n east Posts: 553 Member: 6705 Status: Offline Thanks Meter: 24	spv handset code have a orange spv unlocked but need to resetr the handset code or find it out any ideas any one

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sharp GX10 handset code	MPS	Sharp	4	01-10-2009 04:48
C139 handset codes... Secret Codes	gsm1999	Motorola ODM	13	04-28-2008 12:19
gx10 handset code	ali-g-string	Sharp	45	04-13-2004 20:59
Sharp gx-10 handset code how????	tito2002	Sharp	3	06-03-2003 16:27
Sharp with Handset Code	andrews	Sharp	0	02-09-2003 20:00

03-05-2005, 12:11	#4 (permalink)
ali-g-string No Life Poster Join Date: Apr 2002 Location: West Midlands, UK Posts: 526 Member: 11099 Status: Offline Thanks Meter: 5	Yep how do we do that on spv c500?

03-05-2005, 12:18	#5 (permalink)
bungle_uk No Life Poster Join Date: Jan 2004 Age: 53 Posts: 4,956 Member: 51154 Status: Offline Thanks Meter: 68	Here's the procedure for formatting your SPV (works on most versions, not tested on C500): Check that there is no SD or MMC card in your SPV or that the protective plastic has been removed Switch off your SPV Remove the battery, then replace Start up your SPV by holding down the voice memo record button and the on button After the "Card Found" message, an invitation appears, press on the joystick until the "Canary" menu is displayed (1-2 seconds) Confirm choice number 8: "Erase IPSM" You know the procedure is successful when you see the word "PASSED" appear at the bottom of the screen. Confirm by pressing on the joystick, you will then find yourself back at the menu. Remove the battery, wait for a few moments, then replace. Start up your SPV as normal. It will then go through the initialisation cycle.. which takes a few minutes...

03-05-2005, 12:19	#6 (permalink)
ali-g-string No Life Poster Join Date: Apr 2002 Location: West Midlands, UK Posts: 526 Member: 11099 Status: Offline Thanks Meter: 5	thanks bungle mate working on c500 1. Press and hold soft1 and soft2 keys. 2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep hold soft1 and soft2 keys. 3. Later, screen shoould show instructions to ask user to press '0' key to reset to factory default. 4. Press '0' within the timeout period, which is only several seconds only. 5. If no instruction is shown on the screen, repeat steps 1 to 4. The timing is sensitive.

03-05-2005, 12:25	#7 (permalink)
bungle_uk No Life Poster Join Date: Jan 2004 Age: 53 Posts: 4,956 Member: 51154 Status: Offline Thanks Meter: 68	Thanks mate, I'll put that in my big black book for future ref. br

03-21-2006, 01:53	#8 (permalink)
elabasimlock Insane Poster Join Date: Mar 2003 Location: Amsterdam Posts: 84 Member: 24510 Status: Offline Thanks Meter: 7	no work for my he give only 1 and 2 no 0