7610 start-up fail - GSM-Forum

kenichi · 07-13-2005, 17:37

I have flashed with RH51_67PE505090.C2 and RH51PE505090.61, full factory and format with keypad ( * + 3 + Green + Power ON). Still shows "Phone start-up fail".

Any idea? No PM in support.

mukarramg · 07-14-2005, 14:36

i got the same problem after complete flash it waork when i start it second time it shows phone startup fail

Max_B · 07-14-2005, 15:02

First check IMEI while reading info if not just erased.
Also for 7610 there are some firmware versions with same fw number but not same launching date. Check wth *#0000# on working phones

So to being sure of that mcu & ppm are from same fw just uninstall it all and install once again just one package.

Max_B

All_mobiles · 07-14-2005, 16:52

1-format more than one.

2-u can try erase
flash mcu & ppm
wr pm, format ,unlock

All_mobiles · 07-14-2005, 16:55

********************
deleted

corvinu · 07-15-2005, 12:17

after flash you have to make

FORMAT USER AREA

br corvinu

abadon · 07-15-2005, 14:15

FORMAT USER AREA
work 100% tested

Abadon

smartcity88 · 07-16-2005, 15:19

if u tired software,just try to reflow the uem and cpu,u will get the answer!!

07-13-2005, 17:37	#1 (permalink)
kenichi No Life Poster Join Date: Aug 2001 Location: Madrid (from here to heaven) Age: 42 Posts: 811 Member: 6084 Status: Offline Thanks Meter: 4	7610 start-up fail I have flashed with RH51_67PE505090.C2 and RH51PE505090.61, full factory and format with keypad ( * + 3 + Green + Power ON). Still shows "Phone start-up fail". Any idea? No PM in support.

07-16-2005, 15:19	#8 (permalink)
smartcity88 Junior Member Join Date: Feb 2004 Location: Tracking.....GPS low batt....! Posts: 19 Member: 53041 Status: Offline Thanks Meter: 0	hardware problem!!! if u tired software,just try to reflow the uem and cpu,u will get the answer!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7610 start up failed	ikram tabassum1	Nokia Hardware & Hardware Repair	9	10-08-2008 10:59
7610 start-up failed	ikram tabassum1	Nokia Hardware & Hardware Repair	5	09-23-2008 17:36
Nokia 7610 Start Up Failed Contact Retailer Solution	RAJAN62073	Universalbox	3	07-17-2008 19:24
7610 start up fail	amitks_in	Nokia Hardware & Hardware Repair	11	09-04-2006 10:36
7610 start-up failed affter 30min pwoer off	ashrafcell	Nokia Hardware & Hardware Repair	6	06-11-2006 09:50

07-14-2005, 14:36	#2 (permalink)
mukarramg Insane Poster Join Date: May 2005 Location: Pakistan Age: 38 Posts: 75 Member: 148237 Status: Offline Thanks Meter: 1	i got the same problem after complete flash it waork when i start it second time it shows phone startup fail

07-14-2005, 15:02	#3 (permalink)
Max_B No Life Poster Join Date: Oct 2002 Location: PARIS Posts: 1,565 Member: 16856 Status: Offline Sonork: 1582037 Thanks Meter: 441	First check IMEI while reading info if not just erased. Also for 7610 there are some firmware versions with same fw number but not same launching date. Check wth *#0000# on working phones So to being sure of that mcu & ppm are from same fw just uninstall it all and install once again just one package. Max_B

07-14-2005, 16:55	#5 (permalink)
All_mobiles Freak Poster Join Date: Nov 2004 Age: 40 Posts: 466 Member: 94090 Status: Offline Thanks Meter: 26	******************** deleted

07-15-2005, 12:17	#6 (permalink)
corvinu Freak Poster Join Date: May 2005 Age: 42 Posts: 189 Member: 143499 Status: Offline Thanks Meter: 10	after flash you have to make FORMAT USER AREA br corvinu

07-15-2005, 14:15	#7 (permalink)
abadon Freak Poster Join Date: Apr 2005 Location: somewhere in the darkness Age: 43 Posts: 417 Member: 134869 Status: Offline Thanks Meter: 8	FORMAT USER AREA work 100% tested Abadon