HWK Killer 2.1b released - Page 14 - GSM-Forum

josetolo_jr · 08-03-2006, 17:28

Hi mate, I tried to flash my N70 that was dead by PBB1 phoenix v148. Please find the log below after flashing using twister and please help how to revive my n70.

1st BOOT : C0,0C
HELEN ID : 17100701
HELEN MODE: 00
HELEN PBID: 15448E37A17BF1C70425E99F5FE0DF843ECCDBD3
HELEN HASH: 2C05369F57CC3C4CF9E783E83D9B512B
HELEN ROID: AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000341
RAPx PBID : 1050000FA47049516C333894E09A22460355B829
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot Ok
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.9.2
CMT FLID0 : 00EC22FA-00000011, Sam K8S6415ET
CMT FLCNT : 0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 1.9.3
CMT Alg Boot OK
APE 2nd Bt: helen3_2nd.fg, Ver: 1.16.0
APE FLID : 00EC0036-00A500C0, Sam KAL00R00EB
APE REALG : OMAP1610 GBBM-1.8.1 ALG
APE FLCNT : 010000000000000000000000000000000000
APE 2nd Boot OK
APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.18.0
PUB SIG 0 : 010F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE Alg Boot OK
Erase Area: CMT 0x00000000-0052AB9D
Erase Area: CMT 0x006A0000-006BFFFF
Erase Area: CMT 0x006DF000-006EFFFF
Erase Area: CMT 0x00700000-007EFFFF
CMT FLASH ERASE OK, Time: 00:01
CMT FLASH WRITE OK, Time: 00:27
1st BOOT : C0,0C
HELEN ID : 17100701
HELEN MODE: 00
HELEN PBID: 15448E37A17BF1C70425E99F5FE0DF843ECCDBD3
HELEN HASH: 2C05369F57CC3C4CF9E783E83D9B512B
HELEN ROID: AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000341
RAPx PBID : 1050000FA47049516C333894E09A22460355B829
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot Ok
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.9.2
CMT FLID0 : 00EC22FA-00000011, Sam K8S6415ET
CMT FLCNT : 0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 1.9.3
CMT Alg Boot OK
APE 2nd Bt: helen3_2nd.fg, Ver: 1.16.0
APE FLID : 00EC0036-00A500C0, Sam KAL00R00EB
APE REALG : OMAP1610 GBBM-1.8.1 ALG
APE FLCNT : 010000000000000000000000000000000000
APE 2nd Boot OK
APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.18.0
PUB SIG 0 : 010F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE Alg Boot OK
Erase Area: APE 0x00000000-0000FFFF
Erase Area: APE 0x00010000-0001FFFF
Erase Area: APE 0x00020000-000203FF
Erase Area: APE 0x00050000-03ECFFFF
APE FLASH ERASE OK, Time: 00:06
APE FLASH WRITE OK, Time: 02:26
1st BOOT : C0,0C
HELEN ID : 17100701
HELEN MODE: 00
HELEN PBID: 15448E37A17BF1C70425E99F5FE0DF843ECCDBD3
HELEN HASH: 2C05369F57CC3C4CF9E783E83D9B512B
HELEN ROID: AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000341
RAPx PBID : 1050000FA47049516C333894E09A22460355B829
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot Ok
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.9.2
CMT FLID0 : 00EC22FA-00000011, Sam K8S6415ET
CMT FLCNT : 0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 1.9.3
CMT Alg Boot OK
APE 2nd Bt: helen3_2nd.fg, Ver: 1.16.0
APE FLID : 00EC0036-00A500C0, Sam KAL00R00EB
APE REALG : OMAP1610 GBBM-1.8.1 ALG
APE FLCNT : 010000000000000000000000000000000000
APE 2nd Boot OK
APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.18.0
PUB SIG 0 : 010F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE Alg Boot OK
Erase Area: APE 0x01DE0000-029FFFFF
Erase Area: APE 0x02A00000-03ECFFFF
PPM FLASH ERASE OK, Time: 00:03
PPM FLASH WRITE OK, Time: 01:06
Flashing Completed, Rebooting Mobile

BR

linekbp · 08-04-2006, 15:06

working 100%, but the problem is it hangs on detecting the hwk key .then i have to remove the power cable and again connect it .i always get the same screen . zulea pleas help, where r u
?

wntl · 08-04-2006, 17:42

i try unlock k300 and k700, and after press GO nothing going on ;/ no logs, just fast blinking: Pre-Boot Failed. Power_Up, 00:07 I don't know what is going on ;/ Please help me !!

agianmaker · 08-05-2006, 17:51

thank you very much

it good and work and very work

thank you again

BR

blu · 08-06-2006, 04:00

6680 flashing works. tnx for this knowledge shared.

Tr0nAd0r · 08-07-2006, 19:44

about KZF, is working fine with this crack ????

johnreza · 08-07-2006, 21:26

Does Anybody Flashed 3250

emwugsm · 08-07-2006, 21:51

It doesn't work for me

fr3nsis · 08-08-2006, 13:32

with UFS_DCTxBB5 2.00

Quote:

Detected: V 05wk07v41 08-02-06 RM-84 (c) Nokia.
1st BOOT : C0,0C
HELEN ID : 17100701
HELEN MODE: 00
HELEN PBID: 531450CE828F58C813B5B79B2C064A5D6449570A
HELEN HASH: 2C05369F57CC3C4CF9E783E83D9B512B
HELEN ROID: AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000352
RAPx PBID : 16600115DB5A4E513282E9FA8FDEBF3D6D23E3EF
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot Ok
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.9.2
CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 1.9.3
CMT Alg Boot OK
Erase Area: CMT 0x00000000-0052AB9D
Erase Area: CMT 0x006A0000-006BFFFF
Erase Area: CMT 0x006DF000-006EFFFF
Erase Area: CMT 0x00700000-007EFFFF
CMT FLASH ERASE OK, Time: 00035
CMT FLASH WRITE OK, Time: 00028
1st BOOT : C0,0C
HELEN ID : 17100701
HELEN MODE: 00
HELEN PBID: 531450CE828F58C813B5B79B2C064A5D6449570A
HELEN HASH: 2C05369F57CC3C4CF9E783E83D9B512B
HELEN ROID: AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000352
RAPx PBID : 16600115DB5A4E513282E9FA8FDEBF3D6D23E3EF
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot Ok
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.9.2
CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 1.9.3
CMT Alg Boot OK
APE 2nd Bt: helen3_2nd.fg, Ver: 1.16.0
APE FLID : 00EC0036-00A500C0, Sam KAL00R00EB
APE REALG : OMAP1610 GBBM-1.8.1 ALG
APE FLCNT : 010000000000000000000000000000000000
APE 2nd Boot OK
APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.18.0
PUB SIG 0 : 000F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
PUB SIG 1 : 010F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE Alg Boot OK
Erase Area: APE 0x00000000-0000FFFF
Erase Area: APE 0x00010000-0001FFFF
Erase Area: APE 0x00020000-000203FF
Erase Area: APE 0x00050000-03ECFFFF
APE FLASH ERASE OK, Time: 00006
APE FLASH WRITE OK, Time: 00230
1st BOOT : C0,0C
HELEN ID : 17100701
HELEN MODE: 00
HELEN PBID: 531450CE828F58C813B5B79B2C064A5D6449570A
HELEN HASH: 2C05369F57CC3C4CF9E783E83D9B512B
HELEN ROID: AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000352
RAPx PBID : 16600115DB5A4E513282E9FA8FDEBF3D6D23E3EF
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot Ok
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.9.2
CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 1.9.3
CMT Alg Boot OK
APE 2nd Bt: helen3_2nd.fg, Ver: 1.16.0
APE FLID : 00EC0036-00A500C0, Sam KAL00R00EB
APE REALG : OMAP1610 GBBM-1.8.1 ALG
APE FLCNT : 010000000000000000000000000000000000
APE 2nd Boot OK
APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.18.0
PUB SIG 0 : 000F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
PUB SIG 1 : 010F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE Alg Boot OK
Erase Area: APE 0x01DE0000-028FFFFF
Erase Area: APE 0x02900000-03ECFFFF
PPM FLASH ERASE OK, Time: 00003
PPM FLASH WRITE OK, Time: 00053
Flashing Completed, Rebooting Mobile
All Done, Time: 00508

parot · 08-08-2006, 15:23

Quote:

Originally Posted by Tr0nAd0r

about KZF, is working fine with this crack ????

NOP.. NOT WORKING WELL...

BR,
PAROT

ctl · 08-08-2006, 23:15

When I try to use UFS_LG_GSM I can´t unlock or boot any phones. Could anybody please help me out. After I press BOOT I get this messege: No Response from Target

Afzaal · 08-09-2006, 04:40

Quote:

Originally Posted by ctl

When I try to use UFS_LG_GSM I can´t unlock or boot any phones. Could anybody please help me out. After I press BOOT I get this messege: No Response from Target

yes same happened with me.
but i thaught it was phone connecter problem.
BR

kindo · 08-23-2006, 06:14

Quote:

Originally Posted by Raskal

Instruction as follow:

1.) buy screwdriver
2.) remove screw from box and take out pcb
3.) remove this HWK $hit
4.) look for next thashcan and throw hwk inside
5.) insert pcb in box again and put back the screw
6.) download hwk killer 1.2b and patch the latest exe
7.) success, no need any $hit hwk to make you box work with, no need short any cables

@Raskal,

a few question here,
1. when installing the 3.01 suite, it asking install with hwk or not : what should i choose?
2. after complete installing before patch it, aren't we must run update client?

i m using P3 500mhz processor with winxp sp2 and tornado box

Thanks

vmobihcm · 08-23-2006, 07:25

Hellp me plz!
I patched file UFS_DCTxBB5.exe but winxp cannot run it. This file was replace by file UFS_DCTxBB5.exe only 9KByte. Windows cannot run it.
How can i fix this problem?
SAms, KZF,... is same

trieubk · 08-23-2006, 07:50

Quote:

Originally Posted by kindo

@Raskal,

a few question here,
1. when installing the 3.01 suite, it asking install with hwk or not : what should i choose?
2. after complete installing before patch it, aren't we must run update client?

i m using P3 500mhz processor with winxp sp2 and tornado box

Thanks

1 you must select "install with hwk"
2 no need update client.

goodluck

08-06-2006, 04:00	#200 (permalink)
blu Junior Member Join Date: Oct 2004 Location: upside down Posts: 39 Member: 88497 Status: Offline Thanks Meter: 0	it works 6680 flashing works. tnx for this knowledge shared.

08-08-2006, 23:15	#206 (permalink)
ctl Freak Poster Join Date: Feb 2006 Location: Brazil Age: 49 Posts: 98 Member: 229576 Status: Offline Thanks Meter: 9	UFS_LG_GSM - No Response from Target When I try to use UFS_LG_GSM I can´t unlock or boot any phones. Could anybody please help me out. After I press BOOT I get this messege: No Response from Target

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
usf setup3.01 can't work with killer 2.1b	denard	Twisterflasher	8	10-06-2006 12:27
Anyone tested Nokia 6280 flash on HWK Killer 2.1b???	y2khjh	Twisterflasher	5	07-24-2006 13:57
HWK Killer 2.0 final release, download from here	Raskal	Twisterflasher	192	07-03-2006 15:44

08-03-2006, 17:28	#196 (permalink)
josetolo_jr Freak Poster Join Date: Dec 2003 Posts: 315 Member: 45351 Status: Offline Thanks Meter: 2	Hi mate, I tried to flash my N70 that was dead by PBB1 phoenix v148. Please find the log below after flashing using twister and please help how to revive my n70. 1st BOOT : C0,0C HELEN ID : 17100701 HELEN MODE: 00 HELEN PBID: 15448E37A17BF1C70425E99F5FE0DF843ECCDBD3 HELEN HASH: 2C05369F57CC3C4CF9E783E83D9B512B HELEN ROID: AB5E4ADB27A06946 RAPx ID : 000000010000022600010006000C192101002200 EM 1 ID : 00000232 EM 2 ID : 00000341 RAPx PBID : 1050000FA47049516C333894E09A22460355B829 RAPx MODE : 00 RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14 RAPx ROID : F28A211FCEA7B19D CMT 1st Boot Ok CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.9.2 CMT FLID0 : 00EC22FA-00000011, Sam K8S6415ET CMT FLCNT : 0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo.fg, Ver: 1.9.3 CMT Alg Boot OK APE 2nd Bt: helen3_2nd.fg, Ver: 1.16.0 APE FLID : 00EC0036-00A500C0, Sam KAL00R00EB APE REALG : OMAP1610 GBBM-1.8.1 ALG APE FLCNT : 010000000000000000000000000000000000 APE 2nd Boot OK APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.18.0 PUB SIG 0 : 010F72BF9DE5D6711B3B1133EBCAB5914FA419C78D APE Alg Boot OK Erase Area: CMT 0x00000000-0052AB9D Erase Area: CMT 0x006A0000-006BFFFF Erase Area: CMT 0x006DF000-006EFFFF Erase Area: CMT 0x00700000-007EFFFF CMT FLASH ERASE OK, Time: 00:01 CMT FLASH WRITE OK, Time: 00:27 1st BOOT : C0,0C HELEN ID : 17100701 HELEN MODE: 00 HELEN PBID: 15448E37A17BF1C70425E99F5FE0DF843ECCDBD3 HELEN HASH: 2C05369F57CC3C4CF9E783E83D9B512B HELEN ROID: AB5E4ADB27A06946 RAPx ID : 000000010000022600010006000C192101002200 EM 1 ID : 00000232 EM 2 ID : 00000341 RAPx PBID : 1050000FA47049516C333894E09A22460355B829 RAPx MODE : 00 RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14 RAPx ROID : F28A211FCEA7B19D CMT 1st Boot Ok CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.9.2 CMT FLID0 : 00EC22FA-00000011, Sam K8S6415ET CMT FLCNT : 0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo.fg, Ver: 1.9.3 CMT Alg Boot OK APE 2nd Bt: helen3_2nd.fg, Ver: 1.16.0 APE FLID : 00EC0036-00A500C0, Sam KAL00R00EB APE REALG : OMAP1610 GBBM-1.8.1 ALG APE FLCNT : 010000000000000000000000000000000000 APE 2nd Boot OK APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.18.0 PUB SIG 0 : 010F72BF9DE5D6711B3B1133EBCAB5914FA419C78D APE Alg Boot OK Erase Area: APE 0x00000000-0000FFFF Erase Area: APE 0x00010000-0001FFFF Erase Area: APE 0x00020000-000203FF Erase Area: APE 0x00050000-03ECFFFF APE FLASH ERASE OK, Time: 00:06 APE FLASH WRITE OK, Time: 02:26 1st BOOT : C0,0C HELEN ID : 17100701 HELEN MODE: 00 HELEN PBID: 15448E37A17BF1C70425E99F5FE0DF843ECCDBD3 HELEN HASH: 2C05369F57CC3C4CF9E783E83D9B512B HELEN ROID: AB5E4ADB27A06946 RAPx ID : 000000010000022600010006000C192101002200 EM 1 ID : 00000232 EM 2 ID : 00000341 RAPx PBID : 1050000FA47049516C333894E09A22460355B829 RAPx MODE : 00 RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14 RAPx ROID : F28A211FCEA7B19D CMT 1st Boot Ok CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.9.2 CMT FLID0 : 00EC22FA-00000011, Sam K8S6415ET CMT FLCNT : 0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo.fg, Ver: 1.9.3 CMT Alg Boot OK APE 2nd Bt: helen3_2nd.fg, Ver: 1.16.0 APE FLID : 00EC0036-00A500C0, Sam KAL00R00EB APE REALG : OMAP1610 GBBM-1.8.1 ALG APE FLCNT : 010000000000000000000000000000000000 APE 2nd Boot OK APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.18.0 PUB SIG 0 : 010F72BF9DE5D6711B3B1133EBCAB5914FA419C78D APE Alg Boot OK Erase Area: APE 0x01DE0000-029FFFFF Erase Area: APE 0x02A00000-03ECFFFF PPM FLASH ERASE OK, Time: 00:03 PPM FLASH WRITE OK, Time: 01:06 Flashing Completed, Rebooting Mobile BR

08-04-2006, 17:42	#198 (permalink)
wntl Freak Poster Join Date: Jul 2005 Location: Poland, Bytom Age: 37 Posts: 177 Member: 161847 Status: Offline Thanks Meter: 47	i try unlock k300 and k700, and after press GO nothing going on ;/ no logs, just fast blinking: Pre-Boot Failed. Power_Up, 00:07 I don't know what is going on ;/ Please help me !!

08-05-2006, 17:51	#199 (permalink)
agianmaker Junior Member Join Date: Apr 2006 Posts: 31 Member: 261603 Status: Offline Thanks Meter: 2	thank you very much it good and work and very work thank you again BR

08-07-2006, 19:44	#201 (permalink)
Tr0nAd0r No Life Poster Join Date: May 2004 Location: Colombia Age: 35 Posts: 889 Member: 64398 Status: Offline Thanks Meter: 153	about KZF, is working fine with this crack ????

08-07-2006, 21:26	#202 (permalink)
johnreza No Life Poster Join Date: Apr 2006 Location: eproom memory Age: 41 Posts: 733 Member: 264366 Status: Offline Thanks Meter: 29	Does Anybody Flashed 3250

08-07-2006, 21:51	#203 (permalink)
emwugsm Freak Poster Join Date: Oct 2004 Location: Poland - Lubin (DLU) Age: 36 Posts: 243 Member: 88545 Status: Offline Thanks Meter: 7	It doesn't work for me

08-23-2006, 07:25	#209 (permalink)
vmobihcm Junior Member Join Date: Aug 2006 Posts: 27 Member: 333448 Status: Offline Thanks Meter: 2	Hellp me plz! I patched file UFS_DCTxBB5.exe but winxp cannot run it. This file was replace by file UFS_DCTxBB5.exe only 9KByte. Windows cannot run it. How can i fix this problem? SAms, KZF,... is same