>>> HWK Tool 100% WORKING <<< - Page 3 - GSM-Forum

Raskal · 01-13-2006, 08:21

Quote:

Originally Posted by jignesh_1000

Can one tell i Don"t have hwk orignal or trial
So how can i used this software showing Error of this
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1
UFS_USB V2.6 (c) SarasSoft 2005. S/n: XXXXX
HID: 0002050604080633
HWK: 01.02-TEST
Licence: True
Selected Device, not Compatible with Software
ON KZF AND ON LG
Thanks..............

You can not. If you not have 5 usd for a trial hwk, than i also can not help you.

B.R.,
Raskal

Raskal · 01-13-2006, 08:28

Quote:

Originally Posted by chiragp

Friends For Orgi Hwk And My Cust Pls Dont Ever Try This Without Asking Me In Short Thnks

Many of your friends of original HWK has been fuked by 3 cheaters Narry, Gobi and Odia by having "Self Destructed" ORINGINAL HWK for 200 EURO and no one exchanged to them. What this ppl have to loose if they try it ?

You can see here for example, and in many other topics http:///vbb/showthread.php?t=227776

Ehreen · 01-13-2006, 08:46

@raskal those this works with flashing bb5 also including 6270 and change imei on dct4 phones?

Raskal · 01-13-2006, 08:53

Quote:

Originally Posted by grin

@raskal those this works with flashing bb5 also including 6270 and change imei on dct4 phones?

Of course. If works with all features supported by latest release.

B.R.,
Raskal

Khryssis · 01-13-2006, 09:07

My hwk is connected but reads "Not attached" . Any solution for this?

Ehreen · 01-13-2006, 09:07

thx mr raskal for the prompt answer more power to you! btw i bought jaf from x-shadow but sadly it is now out of warranty i need to a transistor mosfet to be able to run my jaf again could you pls help me out btw my box still runs but it does not flash phones due to damage parts if you available parts can i bought it from you

Raskal · 01-13-2006, 09:11

Quote:

Originally Posted by grin

thx mr raskal for the prompt answer more power to you! btw i bought jaf from x-shadow but sadly it is now out of warranty i need to a transistor mosfet to be able to run my jaf again could you pls help me out btw my box still runs but it does not flash phones due to damage parts if you available parts can i bought it from you

I can send you the part, but have you tried to find it in your country? It will be maybe little bit cheaper. It's a common part, i don't think is too hard to find. Try, if you not find, contact me again and i send you new transistor.

B.R.,
Raskal

Raskal · 01-13-2006, 09:12

Quote:

Originally Posted by Khryssis

My hwk is connected but reads "Not attached" . Any solution for this?

And you are really sure you have the HWK fizically inserted and not emulated by wires?

B.R.,
Raskal

Khryssis · 01-13-2006, 09:18

Yes. It is physically fixed, not emulated by wires..

Ehreen · 01-13-2006, 09:23

actually i done it i already search here for the part but there is no available here in my country philippines. so i ask you for the help btw this is the part# irml6402 p-channel mosfet. the description of this in jaf board is "q5". hopefully you could help me out on this thx.

Raskal · 01-13-2006, 09:33

Quote:

Originally Posted by grin

actually i done it i already search here for the part but there is no available here in my country philippines. so i ask you for the help btw this is the part# irml6402 p-channel mosfet. the description of this in jaf board is "q5". hopefully you could help me out on this thx.

Ok, PM me now you adress, i will send you a new one, but you need to pay the dhl fee. Also PM me your jaf serial number. REseller no need, you said allready it is xshadow.

B.R.,
RAskal

Raskal · 01-13-2006, 09:35

Quote:

Originally Posted by Khryssis

Yes. It is physically fixed, not emulated by wires..

than is you hwk fizicaly damaged.

B.R.,
Raskal

dhru_21 · 01-13-2006, 09:41

it's Working 1000000000%

with IMEI Patch, KZF1.8e , 1.4w .....working nice...

big Thnx to Raskal....

Khryssis · 01-13-2006, 09:42

Quote:

Originally Posted by Raskal

than is you hwk fizicaly damaged.

B.R.,
Raskal

So, this solution cannot work for me..

I gotta get a trial Hwk, right?

Raskal · 01-13-2006, 09:45

Quote:

Originally Posted by Khryssis

So, this solution cannot work for me..

I gotta get a trial Hwk, right?

But you say you have HWK inside? No need to be trial Hwk, any HWK even original one works if was SELF DESTRUCT before.

B.R.,
RAskal

01-13-2006, 09:41	#43 (permalink)
dhru_21 No Life Poster Join Date: Jun 2005 Posts: 584 Member: 155820 Status: Offline Thanks Meter: 60	it's Working 1000000000% it's Working 1000000000% with IMEI Patch, KZF1.8e , 1.4w .....working nice... big Thnx to Raskal....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
>>> C139 to 900 / 1800 - 100% WORKED <<<	RNC_EBM	Infinity-Box	93	01-12-2011 04:05
>>> K750 to W800 - 100% WORKING <<<	RNC_EBM	HWK	88	05-13-2006 16:49
>>> Semc Tool V6.1 <<<	xileen2k	SonyEricsson (USB-Smart)	12	01-15-2006 15:57
>>> SEMC Tool v5.4 <<<	RNC_EBM	SonyEricsson (USB-Smart)	3	12-16-2005 01:07
>>> SEMC Tool v5.3 <<<	RNC_EBM	SonyEricsson (USB-Smart)	5	12-15-2005 22:04

01-13-2006, 08:46	#33 (permalink)
Ehreen Freak Poster Join Date: Mar 2004 Age: 51 Posts: 277 Member: 57617 Status: Offline Thanks Meter: 1	@raskal those this works with flashing bb5 also including 6270 and change imei on dct4 phones?

01-13-2006, 09:07	#35 (permalink)
Khryssis Freak Poster Join Date: Oct 2003 Location: MaxCom♥ Age: 45 Posts: 257 Member: 41067 Status: Offline Thanks Meter: 4	My hwk is connected but reads "Not attached" . Any solution for this?

01-13-2006, 09:07	#36 (permalink)
Ehreen Freak Poster Join Date: Mar 2004 Age: 51 Posts: 277 Member: 57617 Status: Offline Thanks Meter: 1	thx mr raskal for the prompt answer more power to you! btw i bought jaf from x-shadow but sadly it is now out of warranty i need to a transistor mosfet to be able to run my jaf again could you pls help me out btw my box still runs but it does not flash phones due to damage parts if you available parts can i bought it from you

01-13-2006, 09:18	#39 (permalink)
Khryssis Freak Poster Join Date: Oct 2003 Location: MaxCom♥ Age: 45 Posts: 257 Member: 41067 Status: Offline Thanks Meter: 4	Yes. It is physically fixed, not emulated by wires..

01-13-2006, 09:23	#40 (permalink)
Ehreen Freak Poster Join Date: Mar 2004 Age: 51 Posts: 277 Member: 57617 Status: Offline Thanks Meter: 1	actually i done it i already search here for the part but there is no available here in my country philippines. so i ask you for the help btw this is the part# irml6402 p-channel mosfet. the description of this in jaf board is "q5". hopefully you could help me out on this thx.