Repair For Killed Saras Boxes Very Easy - GSM-Forum

zahidpmb · 10-05-2005, 13:37

Here Is Solution For Saras Boxes. All Tools For This You Can Find Here. IS LINK
http://www.djawir.com/donlot/index.p...Twister_N-Box/

andre128 · 10-05-2005, 13:54

download from the txt file above:

how to repair killed ufs
1)download mprog &install to your pc.now if you good ept file.repair ufs epporom with it.or if you have a working box read epporom using mprog and save as your box s.no for example 63321.ept.now repair ufs with new epporm(63321.ept).
2)now recoonect box and install latest twister usb driver.
3)now run fix your serial no of box using ufs maintenance tool20(even no need full version)
4)now open program name is( hwk-eom ) press connect&press emulate am .after that open new dctx 1.3k verson and press connect. it will ask you string use AnB caculater to calculate strings hwk dctx. copy&aste strings, now close dctx. and open again,press connect box is working 100%

Kanwalgee · 10-05-2005, 13:54

FIRST-use search my friend and then post every thing is avail in this forum

Arturjan · 10-05-2005, 14:10

plisee pass RAR Tenks

zahidpmb · 10-05-2005, 14:31

I Know It Is Awailable But. Donot Tell Me. I Just Explain It Easy Way.

Lucky Titico · 10-06-2005, 11:34

Quote:

Originally Posted by zahidpmb

I Know It Is Awailable But. Donot Tell Me. I Just Explain It Easy Way.

how??????where's the solution?

GyRO · 10-06-2005, 12:02

easy solution for simple problem how about corrupted atmega do you have the software to write atmega8L w/o pulling out in the pCB this is what im looking for.

blutac · 10-06-2005, 12:27

I think pony prog can do the trick (not tested though) with simple programmer diagram.

br
blutac

hacksat2004 · 10-06-2005, 15:31

Quote:

Originally Posted by zahidpmb

Here Is Solution For Saras Boxes. All Tools For This You Can Find Here. IS LINK
http://www.djawir.com/donlot/index.p...Twister_N-Box/

download this file is very easy

http://www.gsmdestek.com/dosyalar/diger/update.rar

FullFLASHgSMPH · 10-06-2005, 15:58

Quote:

Originally Posted by UFSx-3

download from the txt file above:

how to repair killed ufs
1)download mprog &install to your pc.now if you good ept file.repair ufs epporom with it.or if you have a working box read epporom using mprog and save as your box s.no for example 63321.ept.now repair ufs with new epporm(63321.ept).
2)now recoonect box and install latest twister usb driver.
3)now run fix your serial no of box using ufs maintenance tool20(even no need full version)
4)now open program name is( hwk-eom ) press connect&press emulate am .after that open new dctx 1.3k verson and press connect. it will ask you string use AnB caculater to calculate strings hwk dctx. copy&aste strings, now close dctx. and open again,press connect box is working 100%

>>>> VERY NICE YES SIR I HAVE ALL THAT BUT HOW ABOUT SONICX BOX KILLED BY UFSX CHANGER?? DO U HAVE SOLUTION?????????????????????????

fullfash_sl cellphone-software

""all about solution""

shakal666 · 10-07-2005, 11:13

thnx man very good work thnx 100xx

KhOliO · 10-07-2005, 19:11

good work dear

nice sice

good programes

descovery · 10-07-2005, 21:56

realy very great work thx for sharing
br

sanjeewa57 · 10-07-2005, 21:58

the all are old software. not new

updown · 10-14-2005, 21:37

i want to alive my box again but how...guaided me my Big bro the problem is shown in the pics....actully i use UFS3 tools and after connect when i click on restore i upload wrong ***.bin file after that my box is trying to connect bt disconnect...now ufs3 tools give error on restoring orignal file.. it say Erasing Firmware error... i use mpog2.3 program to repaire FTDI chip now its ok.... and use ufs mantanious tools when i boot ufsx and show info its only boot bt nt show any info....

help me its my need i have pending alot of work for that reason

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moto Tool For All SARAS Box Needed.....thank	jameslym	Motorola P2k	5	06-26-2008 13:28
New Acer Activation For All Saras Boxes	einstien	UFS2 + UFS3-Tornadoflasher	1	03-23-2006 14:46
for when saras box will not support all series Z107 Z130 Z140 Z500	power cell	HWK	1	12-02-2005 11:51
Moto Tool For All SARAS Box...	jameslym	UFS2 + UFS3-Tornadoflasher	27	10-15-2005 10:24
Jaf Box With Bb5 For Under £80 For All Saras Box Owners	yeldar	Main Sales Section	0	07-25-2005 00:31

10-05-2005, 13:54	#2 (permalink)
andre128 No Life Poster Join Date: Aug 2005 Location: MY Posts: 2,369 Member: 172261 Status: Offline Thanks Meter: 364	download from the txt file above: how to repair killed ufs 1)download mprog &install to your pc.now if you good ept file.repair ufs epporom with it.or if you have a working box read epporom using mprog and save as your box s.no for example 63321.ept.now repair ufs with new epporm(63321.ept). 2)now recoonect box and install latest twister usb driver. 3)now run fix your serial no of box using ufs maintenance tool20(even no need full version) 4)now open program name is( hwk-eom ) press connect&press emulate am .after that open new dctx 1.3k verson and press connect. it will ask you string use AnB caculater to calculate strings hwk dctx. copy&aste strings, now close dctx. and open again,press connect box is working 100%

10-05-2005, 13:54	#3 (permalink)
Kanwalgee No Life Poster Join Date: Jun 2004 Location: China Age: 46 Posts: 2,737 Member: 68392 Status: Offline Sonork: 100.100701 Thanks Meter: 658	FIRST-use search my friend and then post every thing is avail in this forum

10-05-2005, 14:10	#4 (permalink)
Arturjan Junior Member Join Date: Oct 2005 Age: 40 Posts: 9 Member: 187371 Status: Offline Thanks Meter: 2	plisee pass RAR Tenks

10-05-2005, 14:31	#5 (permalink)
zahidpmb Insane Poster Join Date: May 2005 Age: 46 Posts: 95 Member: 147477 Status: Offline Thanks Meter: 35	I Know It Is Awailable But. Donot Tell Me. I Just Explain It Easy Way.

10-06-2005, 12:02	#7 (permalink)
GyRO Freak Poster Join Date: Aug 2005 Location: PH Age: 47 Posts: 402 Member: 167930 Status: Offline Thanks Meter: 5	easy solution for simple problem how about corrupted atmega do you have the software to write atmega8L w/o pulling out in the pCB this is what im looking for.

10-06-2005, 12:27	#8 (permalink)
blutac No Life Poster Join Date: Dec 2001 Location: RP Posts: 615 Member: 7734 Status: Offline Thanks Meter: 0	I think pony prog can do the trick (not tested though) with simple programmer diagram. br blutac

10-07-2005, 11:13	#11 (permalink)
shakal666 Junior Member Join Date: Mar 2004 Age: 40 Posts: 22 Member: 58897 Status: Offline Thanks Meter: 1	thnx man very good work thnx 100xx

10-07-2005, 19:11	#12 (permalink)
KhOliO No Life Poster Join Date: Feb 2003 Location: bossunlocker Age: 48 Posts: 1,912 Member: 21732 Status: Offline Sonork: 100.75816 Thanks Meter: 218	good work dear nice sice good programes

10-07-2005, 21:56	#13 (permalink)
descovery Cheater -Don't Deal with him- Join Date: Dec 2003 Location: China & Egypt & Hong Kong Age: 45 Posts: 526 Member: 45854 Status: Offline Sonork: 100.78435 Thanks Meter: 29	realy very great work thx for sharing br

10-07-2005, 21:58	#14 (permalink)
sanjeewa57 Banned Join Date: Aug 2005 Location: on your mind Age: 41 Posts: 798 Member: 170619 Status: Offline Thanks Meter: 13	the all are old software. not new