T610 unlock problem!!!! - GSM-Forum

midou01 · 07-07-2005, 17:33

I have a sony ericsson T610 to unlock, the phone connect with twister but only at 2% and with red light, after that the phone power on. I tried removing and inserting the battery; the boot process takes more than 15 mn and phone don't boot.
What could be the reason and how to solve this problem???

thanks in advance

XisiX · 07-07-2005, 17:51

Are you using 'GO' or 'RSA' button?
(Also check phone connector and clean it if needed)

midou01 · 07-07-2005, 18:07

the phone version is R3C002 so i don't need to use RSA button, only GO is needed. The phone is clean, also i openend it and checked the connector from 2 sides. everything is OK but twister shows only "Mcu_Id: 13 E3 FB C7 9B 79 46 0F" and don't boot the phone after several tries with inserting and removing the battery.
It is really so strange

midou01 · 07-07-2005, 19:25

Problem solved!!!

thanks m8 anyway for replies

cellco_mann · 07-08-2005, 01:05

Quote:

Originally Posted by Yawacom

Problem solved!!!

thanks m8 anyway for replies

PLs Tell here how could u solved ur problem.

midou01 · 07-08-2005, 15:55

I noticed that the major problem of T610 not booting is the N750.In my case when i opened the phone everything was clean but after when i looked under N750 i see a little task of oxydation, so i cleaned it and rehot it at 180°. Then everything was OK. Hope that little schema will help you

07-07-2005, 17:33	#1 (permalink)
midou01 No Life Poster Join Date: Oct 2003 Location: Tunisia Age: 43 Posts: 2,158 Member: 40632 Status: Offline Sonork: 98231 Thanks Meter: 1,658	T610 unlock problem!!!! I have a sony ericsson T610 to unlock, the phone connect with twister but only at 2% and with red light, after that the phone power on. I tried removing and inserting the battery; the boot process takes more than 15 mn and phone don't boot. What could be the reason and how to solve this problem??? thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Samsung Jet S800 Unlock problem	javakiller	Z3X-Team Products	8	05-15-2010 12:14
t610 unlocking probleme	capitalphone	Cruiser Suite	4	12-14-2008 14:20
Sonyericsson t610 unlock problem	shockboy	Twisterflasher	3	11-08-2004 09:02
t610 unlock problem	GsMen	Cruiser Suite	8	04-27-2004 01:05
T610 Unlock Problem	HEADMASTER	Sony Ericsson	0	10-12-2003 22:36

07-07-2005, 17:51	#2 (permalink)
XisiX No Life Poster Join Date: Aug 2003 Location: BiH Posts: 678 Member: 37090 Status: Offline Thanks Meter: 42	Are you using 'GO' or 'RSA' button? (Also check phone connector and clean it if needed)

07-07-2005, 18:07	#3 (permalink)
midou01 No Life Poster Join Date: Oct 2003 Location: Tunisia Age: 43 Posts: 2,158 Member: 40632 Status: Offline Sonork: 98231 Thanks Meter: 1,658	the phone version is R3C002 so i don't need to use RSA button, only GO is needed. The phone is clean, also i openend it and checked the connector from 2 sides. everything is OK but twister shows only "Mcu_Id: 13 E3 FB C7 9B 79 46 0F" and don't boot the phone after several tries with inserting and removing the battery. It is really so strange

07-07-2005, 19:25	#4 (permalink)
midou01 No Life Poster Join Date: Oct 2003 Location: Tunisia Age: 43 Posts: 2,158 Member: 40632 Status: Offline Sonork: 98231 Thanks Meter: 1,658	Problem solved!!! thanks m8 anyway for replies