T630 R7A and R8C flashfiles needed - GSM-Forum

johny3310 · 04-22-2005, 17:35

We need this flash files. I need EMEA2.
Lower versions aren't good solution becouse of hardware differences.
Please help us and upload these files to support area!

MisterX GSMFREE · 04-22-2005, 18:42

R8C ?

I are you sure ? I think R8C is out yet, the newest is R7A.

***GSMWorld*** · 04-22-2005, 20:25

There is one in the download area, but only asian/latin.
If you can add one 7A with german language,it would be great

twisterfan · 04-22-2005, 23:37

Hi

can anyone confirm if the part that gets erased when doing RSA removal is the same in all flashes (bit wise)?

If it is then we could just take this one R7A file and use it for flash recovery and then most problems would be solved...

The biggest problem right now is people that get T630 with R7A software inside, if the PA IC is new then it will not be supported by R6 software.

Only option right now if people get R7A T630 that are RSA protected (all of them are) is to downgrade to R6C software and this is risky business in the long run..

Alternatively if someone knowledgeable got both an ordinary R6 file and a twister R6 file and compared them maybe he/she could make a converter to convert ordinary SE files into Twister SE files..

I have done a few R7 phones but it is with a little bit of fright as i downgrade as i fear that some day i will have to buy a new phone for the *******r because i "screw up" the persons phone cause i cannot do upgrade to R7 ..

This matter i think is more important to fix that to release new twistersuite..

Twisterfan

i_seeque · 04-23-2005, 07:30

no need to worry.
Unlock and downgrade it to R6
i ve unlocked a few ones. No problem in any of them yet.
I will post you screen shot afterwards as i m now away from my default PC.

twisterfan · 04-23-2005, 07:57

Quote:

Originally Posted by i_seeque

no need to worry.
Unlock and downgrade it to R6
i ve unlocked a few ones. No problem in any of them yet.
I will post you screen shot afterwards as i m now away from my default PC.

Oh great, you have downgraded A FEW and had no problems so we should not worry about the other peeps in here that have actually done the same and lost signal on the phone because SE have started using a new PA chip in their phones and the R6 software does not have the "driver" to support it ..

But hey, lets base this on your FEW phones and discard the mere possibility that someone else could have had problems....

If you had read the thread you would have found that this question is based on some people that DID have problems, how in the h*** can you conclude that there is no problem just because you have done a FEW ???

Anyone with a helpfull answer please dont hesitate to answer..

Twisterfan

johny3310 · 04-23-2005, 07:59

i_seeque,
Please don't talk if you don't know what are you talking about.

SET630 with R7A011 software can be with old hardware and new hardware.
Models with new hardware type don't work if you downgrade them (they don't
receive network in 900 MHz band). You'll know it when you come to it

johny3310 · 04-23-2005, 08:01

Happy news,
R7A011 is on official support

ALL versions.

i_seeque · 04-23-2005, 08:17

@johny3310
OK i dont know.
Thing is i ve unlocked as many as 5-6 handsets. All were from T-mobile and were having R7 versions. All were unlocked using R6 rsa files and in other sense downgraded.
NONE of them has yet reported not working on 900MHZ.

IF u and other guys having such problems after using R6 files then it can be a ***** truth. I accept. What i ve tried here - JUST SHARED MY EXPERIENCE.

@twsterfan
i cant restrict your assumptions based on your own thinking. You must shout louder.

AND good news is FILES are on server.. so NO NEED to continue postings more.

MODERATORS plz lock the thread.

Vansy · 04-23-2005, 08:46

SET630 with R7A011 software ready support long time by Cruiser and fighter support site, but just facing 10 phones some haveone change language than no 900MHz networtk, now already repaired .if you facing this problem and cant repaire it by Twisterflasher or cruiser/ fighter, I can help you

johny3310 · 04-23-2005, 09:14

Vansy this problem can be repaired very easy with twister.

You just need right flash files.

Use SEARCH button. Find and download "special" R8C_EMEA5 flash that is 12MB size (uncompressed). Unchek "protect SA when flashing GDFS" option. Flash this R8C mcu and modem to phone and after that use "init SecBlk" with your OTP IMEI.

After that you can working phone, but EMEA5. You can download R7A flash files from
twister support and flash any language pack you want, phone will be OK.

johny3310 · 04-23-2005, 09:19

Quote:

Originally Posted by i_seeque

@johny3310
OK i dont know.
Thing is i ve unlocked as many as 5-6 handsets. All were from T-mobile and were having R7 versions. All were unlocked using R6 rsa files and in other sense downgraded.
NONE of them has yet reported not working on 900MHZ.

IF u and other guys having such problems after using R6 files then it can be a ***** truth. I accept. What i ve tried here - JUST SHARED MY EXPERIENCE.

No, you offered solution, but non-working solution that is killing phones.

I did over 200 pcs of T630 all R7A with old hardware type, and i did it with downgrading. Now i have over 50 pcs of T630, also R7A with new hardware type. Downgrading is not a solution for these phones.

kenichi · 04-23-2005, 10:26

T630 R7A AVR files uploaded, but ARM files????

johny3310 · 04-23-2005, 10:51

Each zip file contain AVR and ARM file!

opo · 04-27-2005, 14:51

Where should i download this. Ifind not in ufsxsupport.com and ufsx.com...pls need link

04-22-2005, 17:35	#1 (permalink)
johny3310 Freak Poster Join Date: Jul 2002 Location: Croatia Age: 49 Posts: 499 Member: 14004 Status: Offline Thanks Meter: 6	T630 R7A and R8C flashfiles needed We need this flash files. I need EMEA2. Lower versions aren't good solution becouse of hardware differences. Please help us and upload these files to support area!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
speadrum,infineon.agere and sky flashfile needed	coolmoney	Chinese Models & Cloned Phones	0	09-26-2009 19:12
Searching for Divltp arm and avr flashfiles for t630 and others!	Gsmhq	Sony Ericsson	2	03-13-2005 17:33
T630 R7A is where?	cyberbob	Sony Ericsson	0	01-20-2005 07:47
T630 R7A Badly needed	Format1	Sony Ericsson	13	12-30-2004 13:48
T630 R7a...	dejo	TOTAL MultiServer	1	12-13-2004 02:58

04-22-2005, 18:42	#2 (permalink)
MisterX GSMFREE No Life Poster Join Date: Aug 2003 Location: Germany , Bavaria Age: 45 Posts: 613 Member: 37125 Status: Offline Thanks Meter: 19	R8C ? I are you sure ? I think R8C is out yet, the newest is R7A.

04-22-2005, 20:25	#3 (permalink)
*GSMWorld* Super Moderator Join Date: May 1999 Location: Wien/Austria Age: 48 Posts: 2,214 Member: 16 Status: Offline Sonork: 100.1652085 GSMWorld Thanks Meter: 1,743	There is one in the download area, but only asian/latin. If you can add one 7A with german language,it would be great

04-22-2005, 23:37	#4 (permalink)
twisterfan No Life Poster Join Date: Feb 2004 Age: 48 Posts: 1,308 Member: 53791 Status: Offline Thanks Meter: 17	Hi can anyone confirm if the part that gets erased when doing RSA removal is the same in all flashes (bit wise)? If it is then we could just take this one R7A file and use it for flash recovery and then most problems would be solved... The biggest problem right now is people that get T630 with R7A software inside, if the PA IC is new then it will not be supported by R6 software. Only option right now if people get R7A T630 that are RSA protected (all of them are) is to downgrade to R6C software and this is risky business in the long run.. Alternatively if someone knowledgeable got both an ordinary R6 file and a twister R6 file and compared them maybe he/she could make a converter to convert ordinary SE files into Twister SE files.. I have done a few R7 phones but it is with a little bit of fright as i downgrade as i fear that some day i will have to buy a new phone for the *******r because i "screw up" the persons phone cause i cannot do upgrade to R7 .. This matter i think is more important to fix that to release new twistersuite.. Twisterfan

04-23-2005, 07:30	#5 (permalink)
i_seeque No Life Poster Join Date: Sep 2002 Location: India Posts: 786 Member: 15238 Status: Offline Thanks Meter: 128	no need to worry. Unlock and downgrade it to R6 i ve unlocked a few ones. No problem in any of them yet. I will post you screen shot afterwards as i m now away from my default PC.

04-23-2005, 07:59	#7 (permalink)
johny3310 Freak Poster Join Date: Jul 2002 Location: Croatia Age: 49 Posts: 499 Member: 14004 Status: Offline Thanks Meter: 6	i_seeque, Please don't talk if you don't know what are you talking about. SET630 with R7A011 software can be with old hardware and new hardware. Models with new hardware type don't work if you downgrade them (they don't receive network in 900 MHz band). You'll know it when you come to it

04-23-2005, 08:01	#8 (permalink)
johny3310 Freak Poster Join Date: Jul 2002 Location: Croatia Age: 49 Posts: 499 Member: 14004 Status: Offline Thanks Meter: 6	Happy news, R7A011 is on official support ALL versions.

04-23-2005, 08:17	#9 (permalink)
i_seeque No Life Poster Join Date: Sep 2002 Location: India Posts: 786 Member: 15238 Status: Offline Thanks Meter: 128	@johny3310 OK i dont know. Thing is i ve unlocked as many as 5-6 handsets. All were from T-mobile and were having R7 versions. All were unlocked using R6 rsa files and in other sense downgraded. NONE of them has yet reported not working on 900MHZ. IF u and other guys having such problems after using R6 files then it can be a ***** truth. I accept. What i ve tried here - JUST SHARED MY EXPERIENCE. @twsterfan i cant restrict your assumptions based on your own thinking. You must shout louder. AND good news is FILES are on server.. so NO NEED to continue postings more. MODERATORS plz lock the thread.

04-23-2005, 08:46	#10 (permalink)
Vansy Banned Join Date: Sep 2003 Location: Cambodia Posts: 1,522 Member: 39069 Status: Offline Sonork: 100.1606677 Thanks Meter: 190	SET630 with R7A011 software ready support long time by Cruiser and fighter support site, but just facing 10 phones some haveone change language than no 900MHz networtk, now already repaired .if you facing this problem and cant repaire it by Twisterflasher or cruiser/ fighter, I can help you

04-23-2005, 09:14	#11 (permalink)
johny3310 Freak Poster Join Date: Jul 2002 Location: Croatia Age: 49 Posts: 499 Member: 14004 Status: Offline Thanks Meter: 6	Vansy this problem can be repaired very easy with twister. You just need right flash files. Use SEARCH button. Find and download "special" R8C_EMEA5 flash that is 12MB size (uncompressed). Unchek "protect SA when flashing GDFS" option. Flash this R8C mcu and modem to phone and after that use "init SecBlk" with your OTP IMEI. After that you can working phone, but EMEA5. You can download R7A flash files from twister support and flash any language pack you want, phone will be OK.

04-23-2005, 10:26	#13 (permalink)
kenichi No Life Poster Join Date: Aug 2001 Location: Madrid (from here to heaven) Age: 42 Posts: 811 Member: 6084 Status: Offline Thanks Meter: 4	T630 R7A AVR files uploaded, but ARM files????

04-23-2005, 10:51	#14 (permalink)
johny3310 Freak Poster Join Date: Jul 2002 Location: Croatia Age: 49 Posts: 499 Member: 14004 Status: Offline Thanks Meter: 6	Each zip file contain AVR and ARM file!

04-27-2005, 14:51	#15 (permalink)
opo No Life Poster Join Date: Oct 2002 Location: Shenzhen China Age: 68 Posts: 1,074 Member: 16350 Status: Offline Sonork: 110823 Thanks Meter: 42	Where should i download this. Ifind not in ufsxsupport.com and ufsx.com...pls need link