D600 Freezing - GSM-Forum

cellshack · 04-05-2007, 08:08

Hey all,could anyone help me?

I replaced the charging block on a D600 now the phone freezes.
I have chaged the flex cable, but with no success.

Does anyone know how to solve this problem?

cellshack · 04-10-2007, 10:43

Really guys,any help would be appreciated.

foner · 04-10-2007, 13:48

If this occurred after changing the charge connector, then make sure that there isn't short between pins. Clean board before placing charge connector

wizardofwaz · 04-10-2007, 13:57

Hey Guy

Your charging block is not on correctly - there is a short somewhere - try removing it and putting it back on.
If it was freezing before you replaced it - try s/ware - or flex.

But the charge block normally causes abnormal freezing on Samsung D500 and D600.

cellshack · 04-11-2007, 11:33

Thanks guys,will try both suggestions and let you know

cellshack · 04-12-2007, 13:19

Replaced the flex cable and it worked,thanks once again for the assistance.

hallime2001 · 08-06-2007, 21:23

Replaced the flex cable and it dont work to me

04-05-2007, 08:08	#1 (permalink)
cellshack Crazy Poster Join Date: Jun 2006 Location: Sea Point Posts: 53 Member: 291085 Status: Offline Thanks Meter: 8	D600 Freezing Hey all,could anyone help me? I replaced the charging block on a D600 now the phone freezes. I have chaged the flex cable, but with no success. Does anyone know how to solve this problem?

04-10-2007, 13:57	#4 (permalink)
wizardofwaz Crazy Poster Join Date: Sep 2006 Age: 49 Posts: 50 Member: 345114 Status: Offline Thanks Meter: 2	D600 freezing Hey Guy Your charging block is not on correctly - there is a short somewhere - try removing it and putting it back on. If it was freezing before you replaced it - try s/ware - or flex. But the charge block normally causes abnormal freezing on Samsung D500 and D600.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
d600 freeze on start up	coolmax	SWIFT Platform	12	08-11-2007 16:15
D600 freezes @ start up	Dub1	SWIFT Platform	3	12-07-2006 02:53
d600 freezing on start up	mobilesurgeon	SWIFT Platform	1	09-15-2006 19:20
d600 freezing	Stylo_GSM	NSPRO	5	05-01-2006 19:58
d600 freeze after debrand flash	jazzcomms	NSPRO	1	04-17-2006 19:46

04-10-2007, 10:43	#2 (permalink)
cellshack Crazy Poster Join Date: Jun 2006 Location: Sea Point Posts: 53 Member: 291085 Status: Offline Thanks Meter: 8	Really guys,any help would be appreciated.

04-10-2007, 13:48	#3 (permalink)
foner Freak Poster Join Date: May 2006 Posts: 368 Member: 278058 Status: Offline Thanks Meter: 81	If this occurred after changing the charge connector, then make sure that there isn't short between pins. Clean board before placing charge connector

04-11-2007, 11:33	#5 (permalink)
cellshack Crazy Poster Join Date: Jun 2006 Location: Sea Point Posts: 53 Member: 291085 Status: Offline Thanks Meter: 8	Thanks guys,will try both suggestions and let you know

04-12-2007, 13:19	#6 (permalink)
cellshack Crazy Poster Join Date: Jun 2006 Location: Sea Point Posts: 53 Member: 291085 Status: Offline Thanks Meter: 8	Replaced the flex cable and it worked,thanks once again for the assistance.

08-06-2007, 21:23	#7 (permalink)
hallime2001 Freak Poster Join Date: Dec 2004 Location: algeria Age: 48 Posts: 206 Member: 95613 Status: Offline Thanks Meter: 17	Replaced the flex cable and it dont work to me