E700-melody OK but no sound when call - GSM-Forum

dragosgsm · 02-01-2007, 23:15

Hi there,I have a Samsung E700-water damaged that has no sound when making a call but the melody sound is OK.
-The flex is ok because I had tested with another pcb
-I had found here on forum a solution to connect a wire between 2 contacts of the handsfree conector but the voice volume is very,very low,I can't hear the person who I'm talking with-It's better then no sound at all,at least Is's a start
-I also found a solution by removeing a black circuit but It doesn't working (I had a A800 in this condition that I had repaired it with this solution,but on e700 it doesn't work!!!!!!!

-It's not a soft problem because I had fullflashed the phone and I had made full reset with that code,I am sure that it's a pcb hardware problem
-Can someone give me working and tested solution for this problem

amei8141 · 02-03-2007, 09:19

try **** the RF ic and the right side ic(UAA) ....

dragosgsm · 02-03-2007, 12:26

Quote:

Originally Posted by amei8141

try **** the RF ic and the right side ic(UAA) ....

Are you fuking mind?????????????
Be serious and post a serious solution!!!!!!!!!!!!!!!!!!!!

How would be dump enouth to do that???????????????

dragosgsm · 02-03-2007, 13:26

problem solved,thread closed

.::Munazzam::. · 06-21-2007, 16:09

Ok..first of all u made a question and then u were waiting for answer but when u found the solution then why not post here?

Munazzam.

Xtremefones · 06-24-2007, 01:06

pls post solution and share with everyone as i have the same problem.

dragosgsm · 06-25-2007, 22:46

The solution was toconnect a wire between 2 contacts of the handsfree conector,I had found here on forum a picture but was shown wrong the pins that had to be conected ,In the end I tryed to conect the last 2 pins and evreything went ok.

Xtremefones · 06-25-2007, 23:57

can u tell me where i can find the contacts of the handsfree pls, it will be a grate help than you.

dragosgsm · 06-27-2007, 19:29

Quote:

Originally Posted by Xtremefones

can u tell me where i can find the contacts of the handsfree pls, it will be a grate help than you.

There are the last to pins of the hadset conector.(or change the connector with a good one)If I had a pic I would post it for you,but I don't have.
Good luck.

Xtremefones · 06-27-2007, 23:35

^ thanks it worked nice one mate.

moncef5 · 10-20-2008, 18:08

change connecteur it s the best solution

02-01-2007, 23:15	#1 (permalink)
dragosgsm No Life Poster Join Date: May 2005 Location: Bacau Posts: 3,227 Member: 148032 Status: Offline Thanks Meter: 415	E700-melody OK but no sound when call Hi there,I have a Samsung E700-water damaged that has no sound when making a call but the melody sound is OK. -The flex is ok because I had tested with another pcb -I had found here on forum a solution to connect a wire between 2 contacts of the handsfree conector but the voice volume is very,very low,I can't hear the person who I'm talking with-It's better then no sound at all,at least Is's a start -I also found a solution by removeing a black circuit but It doesn't working (I had a A800 in this condition that I had repaired it with this solution,but on e700 it doesn't work!!!!!!! -It's not a soft problem because I had fullflashed the phone and I had made full reset with that code,I am sure that it's a pcb hardware problem -Can someone give me working and tested solution for this problem

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Q33 ringer ok -songs ok but no sound when called	mukeshdurg	Chinese Models & Cloned Phones	0	11-05-2009 15:19
d500 ring ok but no sound in call	llcoolr	Samsung Hardware Repair	20	04-04-2009 08:33
need mic way ok but no sound	sopnil	Philips	0	01-26-2008 15:11
C100 RING TONE OK , BUT NO SOUND IN MIC & SPEAKER	eng.hamdow	Samsung Hardware Repair	5	02-19-2006 18:31
e700 flash ok but no power on	MTi-GsM	SYSOL Platform	5	07-01-2005 19:58

02-03-2007, 09:19	#2 (permalink)
amei8141 No Life Poster Join Date: May 2006 Location: in the corner Age: 35 Posts: 544 Member: 285779 Status: Offline Thanks Meter: 49	try **** the RF ic and the right side ic(UAA) ....

02-03-2007, 13:26	#4 (permalink)
dragosgsm No Life Poster Join Date: May 2005 Location: Bacau Posts: 3,227 Member: 148032 Status: Offline Thanks Meter: 415	problem solved,thread closed

06-21-2007, 16:09	#5 (permalink)
.::Munazzam::. Freak Poster Join Date: Mar 2006 Location: Sargodha Pakistan Posts: 420 Member: 251247 Status: Offline Sonork: 1001670304 Thanks Meter: 192	Ok..first of all u made a question and then u were waiting for answer but when u found the solution then why not post here? Munazzam.

06-24-2007, 01:06	#6 (permalink)
Xtremefones Freak Poster Join Date: Aug 2005 Age: 39 Posts: 242 Member: 174626 Status: Offline Thanks Meter: 2	pls post solution and share with everyone as i have the same problem.

06-25-2007, 22:46	#7 (permalink)
dragosgsm No Life Poster Join Date: May 2005 Location: Bacau Posts: 3,227 Member: 148032 Status: Offline Thanks Meter: 415	The solution was toconnect a wire between 2 contacts of the handsfree conector,I had found here on forum a picture but was shown wrong the pins that had to be conected ,In the end I tryed to conect the last 2 pins and evreything went ok.

06-25-2007, 23:57	#8 (permalink)
Xtremefones Freak Poster Join Date: Aug 2005 Age: 39 Posts: 242 Member: 174626 Status: Offline Thanks Meter: 2	can u tell me where i can find the contacts of the handsfree pls, it will be a grate help than you.

06-27-2007, 23:35	#10 (permalink)
Xtremefones Freak Poster Join Date: Aug 2005 Age: 39 Posts: 242 Member: 174626 Status: Offline Thanks Meter: 2	^ thanks it worked nice one mate.

10-20-2008, 18:08	#11 (permalink)
moncef5 Freak Poster Join Date: Jul 2005 Location: TUNISIA Age: 52 Posts: 229 Member: 163515 Status: Offline Thanks Meter: 23	change connecteur it s the best solution