e700 white screen - GSM-Forum

.:: SkyElectronic ::. · 11-11-2004, 11:22

I had replace flat cable becouse of camera error but after replacment just white screen and light no graphics. Which line can be brocken? any idea? flet is ok orginal without parts on it.
Thanks
BR, Milan

megane · 11-11-2004, 14:05

Are you sure that flat is good. Flats for E700 are very bad, of 3 good 1 is bad!
Try replace connector on new flat with connector from bad flat.
If you rotate flat as that contacts where is soldering big lcd is on your side, check second contact from left side (when is that contact bad, result is white screnn)

Imran_Khatri · 11-12-2004, 01:03

Try with other flat cable, this comes mostly by cable...

WBR
Imran Khatri

rirou · 11-12-2004, 02:50

the contact of gnd (masse) in the lcd
there are 3 points gnd, try to connect them with the flat cable
sorry for my english

cellcity · 11-20-2004, 17:58

rep flex had same problem

shree59 · 11-20-2004, 20:31

if ur small lcd is working prperly plz cheak after fitting in its body i solved white screen problem,and the problem was lcd prints drysold plz reold it carefully it is very secstive
sheraz

11-11-2004, 11:22	#1 (permalink)
.:: SkyElectronic ::. Freak Poster Join Date: Nov 2003 Age: 41 Posts: 359 Member: 43712 Status: Offline Thanks Meter: 3	e700 white screen I had replace flat cable becouse of camera error but after replacment just white screen and light no graphics. Which line can be brocken? any idea? flet is ok orginal without parts on it. Thanks BR, Milan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5130 white screen when play video	fakhraei2000	Nokia Hardware & Hardware Repair	13	11-15-2010 04:54
E700 white screen	august dotun	Samsung Hardware Repair	4	08-01-2006 15:01
E700 white screen when trying to take pictures	massimo1980	Samsung Hardware Repair	16	05-17-2005 07:23
E700 white (inner/main) screen, no display	sparkgap	Samsung Hardware Repair	5	02-21-2005 14:15
E700 displays white screen	karamusa	Trident/AGERE Platform	2	11-25-2004 18:05

11-11-2004, 14:05	#2 (permalink)
megane Junior Member Join Date: Aug 2004 Location: Okichland Age: 48 Posts: 10 Member: 76768 Status: Offline Thanks Meter: 5	Are you sure that flat is good. Flats for E700 are very bad, of 3 good 1 is bad! Try replace connector on new flat with connector from bad flat. If you rotate flat as that contacts where is soldering big lcd is on your side, check second contact from left side (when is that contact bad, result is white screnn)

11-12-2004, 01:03	#3 (permalink)
Imran_Khatri No Life Poster Join Date: Mar 2004 Location: Pakistan Age: 42 Posts: 1,416 Member: 56561 Status: Offline Sonork: 100.114006 Thanks Meter: 41	Try with other flat cable, this comes mostly by cable... WBR Imran Khatri

11-12-2004, 02:50	#4 (permalink)
rirou Freak Poster Join Date: Oct 2004 Location: TUNISIA Age: 44 Posts: 365 Member: 85312 Status: Offline Sonork: 1576920 Thanks Meter: 35	the contact of gnd (masse) in the lcd there are 3 points gnd, try to connect them with the flat cable sorry for my english

11-20-2004, 17:58	#5 (permalink)
cellcity No Life Poster Join Date: Mar 2004 Age: 67 Posts: 647 Member: 58052 Status: Offline Thanks Meter: 21	rep flex had same problem

11-20-2004, 20:31	#6 (permalink)
shree59 Freak Poster Join Date: Sep 2004 Age: 43 Posts: 225 Member: 82711 Status: Offline Thanks Meter: 30	if ur small lcd is working prperly plz cheak after fitting in its body i solved white screen problem,and the problem was lcd prints drysold plz reold it carefully it is very secstive sheraz