omnia not charging or recognized by usb - GSM-Forum

daffy duck · 03-06-2009, 15:23

please advice on where to start looking if anyone has an idea???

greetz

..::Mr_Fone::.. · 03-07-2009, 12:26

Quote:

Originally Posted by daffy duck

please advice on where to start looking if anyone has an idea???

greetz

Bro first of u check charging connector and check near area maybe u see any clue those help for u ...............

WBR. IKRAM

daffy duck · 03-09-2009, 17:00

allready changed system connector, and can't se any obvious problem on components near connector.

PSG · 03-20-2009, 13:04

there are often problems with broken legs of connector in OMNIA
i found many broken soldering pads at end of omnia's connector
after i solder first + second to gnd charging back to normal state but 5th leg can't be soldered because solder point under 5th leg is broken
where this 5th (counting from left to right) leg of connector is connected? i have to make a wire connection because phone can't be recognized by PC

sabinus · 09-17-2009, 07:05

Did u manage to resolve the problem .. or have you sold the phone with this fault?
Because I bought a phone with default "Poland" settings. Maybe just a coincidence, or maybe a whole batch of faulty OMNIA's sold mainly in Poland?

03-06-2009, 15:23	#1 (permalink)
daffy duck Freak Poster Join Date: Apr 2003 Location: Belgium Age: 47 Posts: 244 Member: 25820 Status: Offline Thanks Meter: 7	omnia not charging or recognized by usb please advice on where to start looking if anyone has an idea??? greetz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
u600 not charging or turning on	mgibson212	Samsung Hardware Repair	0	06-28-2009 10:37
D500 not charging or short	younesdib	Samsung Hardware Repair	5	06-09-2008 16:30
9500 Flashing Available with UFS or Free..? by usb cable..?	LoveLess	UFS2 + UFS3-Tornadoflasher	2	07-23-2007 13:52

03-09-2009, 17:00	#3 (permalink)
daffy duck Freak Poster Join Date: Apr 2003 Location: Belgium Age: 47 Posts: 244 Member: 25820 Status: Offline Thanks Meter: 7	allready changed system connector, and can't se any obvious problem on components near connector.

03-20-2009, 13:04	#4 (permalink)
PSG No Life Poster Join Date: May 2003 Location: POLAND Posts: 1,262 Member: 27761 Status: Offline Thanks Meter: 55	there are often problems with broken legs of connector in OMNIA i found many broken soldering pads at end of omnia's connector after i solder first + second to gnd charging back to normal state but 5th leg can't be soldered because solder point under 5th leg is broken where this 5th (counting from left to right) leg of connector is connected? i have to make a wire connection because phone can't be recognized by PC

09-17-2009, 07:05	#5 (permalink)
sabinus Junior Member Join Date: Nov 2008 Posts: 2 Member: 893005 Status: Offline Thanks Meter: 0	Did u manage to resolve the problem .. or have you sold the phone with this fault? Because I bought a phone with default "Poland" settings. Maybe just a coincidence, or maybe a whole batch of faulty OMNIA's sold mainly in Poland?