d600 charging not stop - GSM-Forum

erayturkoglu · 05-06-2006, 10:21

d600 charging ok voltage ok but not stopped battery full but charging not stopped

please help me

i was try sw and charging ic but not solution

everybody have a another idea?

..::ArchitRaj::.. · 05-06-2006, 18:05

change charging ic
and soldring charging components

erayturkoglu · 05-11-2006, 08:04

i was tryed your idea?
changed charger ic and resoldered charger companent?
i think another companent foulth but i dont know which one

BCcommunication · 05-11-2006, 08:44

change your charger or your bettery

erayturkoglu · 05-11-2006, 11:45

change battery and change charger but not solution

ivoaudi · 05-17-2006, 21:36

propably your charger conector is oxide

BalfourCellular · 07-22-2006, 08:16

check the zeder diode by the charging plug. even if it mesures right replace it. good luck !!!!!!!!!!

lader · 07-22-2006, 08:39

problem in your d600 is the IC charge and verefie the diod zener....

ivoaudi · 07-24-2006, 01:11

Or you can just remove this cener.Sometime he is measured like not burned but he make short when charger is conected.

05-06-2006, 10:21	#1 (permalink)
erayturkoglu Freak Poster Join Date: Oct 2004 Location: türkiye Age: 45 Posts: 134 Member: 88251 Status: Offline Thanks Meter: 1	d600 charging not stop d600 charging ok voltage ok but not stopped battery full but charging not stopped please help me i was try sw and charging ic but not solution everybody have a another idea?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
D600 charging not saving plz help urgent	asif_ae	Samsung Hardware Repair	1	02-14-2010 10:41
d600 charging but not power on	abasgsm	UST Pro II	8	06-26-2009 12:09
D600 mic not working ,and does not charge	hugues	Samsung Hardware Repair	0	11-21-2008 13:00
D600 USB not charging	elektroservis	Samsung Hardware Repair	6	09-26-2007 08:07
d600 usb not charging	canliyayin	Samsung Hardware Repair	0	03-19-2007 08:23

05-06-2006, 18:05	#2 (permalink)
..::ArchitRaj::.. No Life Poster Join Date: Sep 2005 Location: Uttaranchal Age: 35 Posts: 2,504 Member: 181696 Status: Offline Sonork: 100.107830 Thanks Meter: 5,406	change charging ic and soldring charging components

05-11-2006, 08:04	#3 (permalink)
erayturkoglu Freak Poster Join Date: Oct 2004 Location: türkiye Age: 45 Posts: 134 Member: 88251 Status: Offline Thanks Meter: 1	i was tryed your idea? changed charger ic and resoldered charger companent? i think another companent foulth but i dont know which one

05-11-2006, 08:44	#4 (permalink)
BCcommunication No Life Poster Join Date: Aug 2004 Location: Pakistan < Karachi Age: 41 Posts: 1,000 Member: 76456 Status: Offline Sonork: 100.1678368 Thanks Meter: 60	change your charger or your bettery

05-11-2006, 11:45	#5 (permalink)
erayturkoglu Freak Poster Join Date: Oct 2004 Location: türkiye Age: 45 Posts: 134 Member: 88251 Status: Offline Thanks Meter: 1	change battery and change charger but not solution

05-17-2006, 21:36	#6 (permalink)
ivoaudi Freak Poster Join Date: Jan 2004 Location: Bulgaria,France Age: 53 Posts: 183 Member: 48820 Status: Offline Thanks Meter: 3	propably your charger conector is oxide

07-22-2006, 08:16	#7 (permalink)
BalfourCellular Freak Poster Join Date: Oct 2004 Location: South Africa Age: 53 Posts: 155 Member: 86981 Status: Offline Thanks Meter: 10	check the zeder diode by the charging plug. even if it mesures right replace it. good luck !!!!!!!!!!

07-22-2006, 08:39	#8 (permalink)
lader No Life Poster Join Date: Dec 2004 Age: 50 Posts: 1,185 Member: 95476 Status: Offline Thanks Meter: 185	problem in your d600 is the IC charge and verefie the diod zener....

07-24-2006, 01:11	#9 (permalink)
ivoaudi Freak Poster Join Date: Jan 2004 Location: Bulgaria,France Age: 53 Posts: 183 Member: 48820 Status: Offline Thanks Meter: 3	Or you can just remove this cener.Sometime he is measured like not burned but he make short when charger is conected.