Samsung galaxy ace 5830 not power on

[rino197]

Hello,
i have samsung galaxy ace 5830 not power on,
I tried with jtag octpus easy repair and repair advanced but nothing,
any idea what it may be, this is the log file octopus_jtag.

Thanks in advance

Log started at 28/03/2014 03:05:24 ...
Welcome to Octoplus JTAG Box Software version 1.5.0
Operating Mode: EasyRepair Mode
Selected device model: Samsung GT-S5830
Connecting. Please wait...power supply.
MI: RTCK reaction time 882 ns, average speed 1133 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C10E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.61 V
CPU : Qualcomm MSM7227T
Core ID : 503C10E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000135.
MI: Detailed server caps: FLASH, ECC, WDOG, DWP, IOCTL
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xB0EC0050.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000135
Flash device: Samsung OneNAND KFG4GH6Q4M
Flash ID : 00EC0050
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
Write protection disabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware
\SAMSUNG_GTS5830_Repair.mf" file...
Writting BOOT section. Please wait... Done
Writting EFS section. Please wait... Done
Writting APPBOOT section. Please wait... Done
Writting UPCH section. Please wait... Done
Repairing IMEI... Done
Disconnected
Repair done.

operating Mode: Advanced Mode
Selected device model: Samsung GT-S5830
Connecting. Please wait...
MI: RTCK reaction time 126 ns, average speed 7936 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 503C10E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM7227T
Core ID : 503C10E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000135.
MI: Detailed server caps: FLASH, ECC, WDOG, DWP, IOCTL
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xB0EC0050.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000135
Flash device: Samsung OneNAND KFG4GH6Q4M
Flash ID : 00EC0050
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
Write protection disabled.
Connect successful.
ECC Mode enabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware
\Samsung_GTS5830_FullFlash.bin" file...
Writting BOOT section. Please wait... Done
Writting FIRMWARE section. Please wait... Done

[rino197]

nobody knows anything? software is not dead as you can see from the log file, it is a hardware fault, no one happened this phone will not turn on?

[exprxp]

PMIC first to be replaced if is HW problem

[rino197]

I do not think PMIC, it should not work with JTAG, see the log file, thanks