SAMSUNG J600 touch keypad not working - GSM-Forum

manrew · 06-23-2008, 08:50

He,
got a as samsung J 600 in which Key board (touch sense0 on the display slide part is not working any help.tried with new upper slide assembly but problem persisit..any help schematic etc.

Regards
manish

ywongg · 11-29-2008, 19:09

Quote:

Originally Posted by manrew

He,
got a as samsung J 600 in which Key board (touch sense0 on the display slide part is not working any help.tried with new upper slide assembly but problem persisit..any help schematic etc.

Regards
manish

i tried to change ribon and digital flex but no result

shaheenalam · 01-01-2009, 08:18

i have a samsung j600. suddenly i getting problem with yes button(touch).its doesn't work. pleas help me soon buddies

mobilepooja · 06-07-2009, 07:17

change inner keypad inside the front pannel it worked for me post reply

chhoton · 06-07-2009, 07:23

change flex cable & post result

100000000000000000% grnty

shiney123 · 06-24-2009, 08:41

Have you tried:

-> Settings
-> 2) Phone Settings
-> 3) Slide Settings
-> press the Down key and select the "Down" entry
-> use Left and right to select "Stop Operation"
-> press the "Save" save soft key

Now when you slide down the cover on your J600 it should disable the touch keys. If you try to press any hard key it should say "Keypad is locked. Press unlock key".broker ccjs mortgage You can either press the "on/off" keyconstruction factoring on the side for one second to unlock or else slide the cover up.

When the slide down is set to "Continue Operation" I get prompted to lock the phone when I slide the cover down.

shiney123 · 06-24-2009, 08:45

I am Jai Goel from Delhi. I am using your two handsets of Samsung namely D-840 and W-339.
We are facing the problem in both the sets. In D-840 the screen was continuously distorted but that complaint was resolved in your service centre in Janakpuri in DC in Delhi itself. In W-339 we are facing a problem of continuous disturbance in between the calls, broker ccjs mortgage it often goes switch off automatically and its keypad lock is also not working and as if you know it is the touch screen handset, keypad unlock is the major problem. It is also in the warranty period as it was purchased in the last winter only.
We have shown this cell to the service centre also (the branch is stated above) but the problem was not solved, construction factoringthen they did send that handset to our head office also twice but still the problem is same. The handset is not working properly.
So, it’s a humble request that please sort out our problem and repair the handset as soon as possible. For collection of the cell please contact on the number given below.
Thank you

06-23-2008, 08:50	#1 (permalink)
manrew Freak Poster Join Date: Sep 2003 Age: 37 Posts: 116 Member: 39002 Status: Offline Thanks: 17 Thanked 22 Times in 10 Posts	SAMSUNG J600 touch keypad not working He, got a as samsung J 600 in which Key board (touch sense0 on the display slide part is not working any help.tried with new upper slide assembly but problem persisit..any help schematic etc. Regards manish

06-07-2009, 07:17	#4 (permalink)
mobilepooja Major Poster Join Date: Aug 2007 Location: Pimpri (Pune) Posts: 47 Member: 562671 Status: Offline Thanks: 22 Thanked 8 Times in 6 Posts	j600 yes button change inner keypad inside the front pannel it worked for me post reply

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
U700 upper touch keypad not working	jamohaki	Samsung Hardware Repair Area	19	06-02-2010 23:38
Samsung S5233A Touch screen not working	nakshatra	NSPRO	1	11-07-2009 08:18
Samsung S5233A Touch screen not working	nakshatra	Samsung Hardware Repair Area	0	11-07-2009 04:36
Samsung E890 Touch Screen not working, solution?	Boshko_Alfa	Samsung Hardware Repair Area	0	01-08-2009 20:08
samsung sgh-e630 keypad not working	maxheadquarters	Samsung Hardware Repair Area	1	01-18-2006 16:25

01-01-2009, 08:18	#3 (permalink)
shaheenalam Freak Poster Join Date: Mar 2008 Posts: 136 Member: 736137 Status: Offline Sonork: qwsa Thanks: 66 Thanked 14 Times in 10 Posts	i have a samsung j600. suddenly i getting problem with yes button(touch).its doesn't work. pleas help me soon buddies

06-07-2009, 07:23	#5 (permalink)
chhoton Freak Poster Join Date: Jul 2007 Location: INDIA Posts: 358 Member: 542743 Status: Offline Thanks: 42 Thanked 80 Times in 51 Posts	change flex cable & post result 100000000000000000% grnty

06-24-2009, 08:41	#6 (permalink)
shiney123 Junior Member Join Date: Jun 2009 Posts: 3 Member: 1060369 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Have you tried: -> Settings -> 2) Phone Settings -> 3) Slide Settings -> press the Down key and select the "Down" entry -> use Left and right to select "Stop Operation" -> press the "Save" save soft key Now when you slide down the cover on your J600 it should disable the touch keys. If you try to press any hard key it should say "Keypad is locked. Press unlock key".broker ccjs mortgage You can either press the "on/off" keyconstruction factoring on the side for one second to unlock or else slide the cover up. When the slide down is set to "Continue Operation" I get prompted to lock the phone when I slide the cover down.

06-24-2009, 08:45	#7 (permalink)
shiney123 Junior Member Join Date: Jun 2009 Posts: 3 Member: 1060369 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I am Jai Goel from Delhi. I am using your two handsets of Samsung namely D-840 and W-339. We are facing the problem in both the sets. In D-840 the screen was continuously distorted but that complaint was resolved in your service centre in Janakpuri in DC in Delhi itself. In W-339 we are facing a problem of continuous disturbance in between the calls, broker ccjs mortgage it often goes switch off automatically and its keypad lock is also not working and as if you know it is the touch screen handset, keypad unlock is the major problem. It is also in the warranty period as it was purchased in the last winter only. We have shown this cell to the service centre also (the branch is stated above) but the problem was not solved, construction factoringthen they did send that handset to our head office also twice but still the problem is same. The handset is not working properly. So, it’s a humble request that please sort out our problem and repair the handset as soon as possible. For collection of the cell please contact on the number given below. Thank you