Sgh-x100 hangs - GSM-Forum

cool12 · 06-09-2007, 22:03

Hi every body, my x100 hangs evey time i've a call , i've changed the battery ,the mic, the alcaline battery, but no way, it's flashed with XP-mod. please help,
best regards

shahzad-0004 · 06-10-2007, 21:49

1..wash phone near charging jeck het pa

2..format nand flash phone mcu and tfs

[shahzad]

cool12 · 06-15-2007, 18:57

Hi , I've done a nand format , and i've swetched to a nother firmware without any good result !!!, by the way what's mcu?
regards

zakir375 · 06-16-2007, 07:58

Quote:

Originally Posted by cool12

Hi , I've done a nand format , and i've swetched to a nother firmware without any good result !!!, by the way what's mcu?
regards

bro mcu is main flash file without it you can't be flash.

HUM · 06-17-2007, 04:01

remove this part which is marked in red and then post result.

cool12 · 06-19-2007, 20:28

I'll try to do this solution and I'll post solution soon, the IC is too small to handle, on the shematic what's the role of this part?

UnlockingLab · 06-20-2007, 22:36

capacitor near the key pad lights remove tham will be ok.

cool12 · 06-21-2007, 21:22

hello, I made what you have advised to make, precisely, I removed the IC 405, but without success, the telephone always Hangs!!!!!!. if still like that all components will be taken off!!!!! please post a real solution.
regards

aha_gsm · 06-21-2007, 22:16

brother just change back frame 100000000000000% ok chack and answer

ICCT iran crack club team

hafizjee · 06-23-2007, 11:05

Quote:

Originally Posted by cool12

Hi every body, my x100 hangs evey time i've a call , i've changed the battery ,the mic, the alcaline battery, but no way, it's flashed with XP-mod. please help,
best regards

try this image dear
Hafiz Mobiles

nishaon · 06-23-2007, 11:33

hafizjee has given the right solution, I have tested

cool12 · 06-23-2007, 20:49

thanks dear, I'll try, but just a question???? all the posts gives a solution whitch is removing something, so why those components are on the board?, an electrical BUG to hang phone after purchase it?

roopesh112007 · 04-26-2010, 14:51

bro
this component r ground
when there value change then its drop more current or less current
so mobile hangs or have any problem

r a nadeem · 04-26-2010, 21:10

Quote:

Originally Posted by roopesh112007

bro
this component r ground
when there value change then its drop more current or less current
so mobile hangs or have any problem

brother Did you checked the date of posting ?
Rashid Ahmed Nadeem

06-09-2007, 22:03	#1 (permalink)
cool12 Junior Member Join Date: May 2004 Age: 46 Posts: 5 Member: 67105 Status: Offline Thanks Meter: 0	Sgh-x100 hangs Hi every body, my x100 hangs evey time i've a call , i've changed the battery ,the mic, the alcaline battery, but no way, it's flashed with XP-mod. please help, best regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Samsung Sgh-x100, Hang If Calling, Pls Help....	ASHRIFF	SYSOL Platform	1	10-12-2006 12:44
I need downloader and firmware for sgh-x100!	masterdwarf01	SYSOL Platform	0	02-10-2004 20:53
Help to unlock a Samsung SGH-x100	Posch	SYSOL Platform	0	01-26-2004 16:17
reset sgh-x100 ??	toritoni	SYSOL Platform	0	01-22-2004 23:13
SGH-X100 unlocking solution needed..	crusher	Trident/AGERE Platform	25	01-08-2004 01:37

06-10-2007, 21:49	#2 (permalink)
shahzad-0004 No Life Poster Join Date: May 2007 Age: 40 Posts: 1,316 Member: 515130 Status: Offline Thanks Meter: 304	1..wash phone near charging jeck het pa 2..format nand flash phone mcu and tfs [shahzad]

06-15-2007, 18:57	#3 (permalink)
cool12 Junior Member Join Date: May 2004 Age: 46 Posts: 5 Member: 67105 Status: Offline Thanks Meter: 0	Hi , I've done a nand format , and i've swetched to a nother firmware without any good result !!!, by the way what's mcu? regards

06-19-2007, 20:28	#6 (permalink)
cool12 Junior Member Join Date: May 2004 Age: 46 Posts: 5 Member: 67105 Status: Offline Thanks Meter: 0	I'll try to do this solution and I'll post solution soon, the IC is too small to handle, on the shematic what's the role of this part?

06-20-2007, 22:36	#7 (permalink)
UnlockingLab Banned Join Date: May 2007 Location: UK Posts: 339 Member: 517371 Status: Offline Sonork: 100.112658 Thanks Meter: 801	capacitor near the key pad lights remove tham will be ok.

06-21-2007, 21:22	#8 (permalink)
cool12 Junior Member Join Date: May 2004 Age: 46 Posts: 5 Member: 67105 Status: Offline Thanks Meter: 0	hello, I made what you have advised to make, precisely, I removed the IC 405, but without success, the telephone always Hangs!!!!!!. if still like that all components will be taken off!!!!! please post a real solution. regards

06-21-2007, 22:16	#9 (permalink)
aha_gsm Crazy Poster Join Date: Jan 2007 Location: Iran Posts: 51 Member: 422420 Status: Offline Thanks Meter: 0	brother just change back frame 100000000000000% ok chack and answer ICCT iran crack club team

06-23-2007, 11:33	#11 (permalink)
nishaon No Life Poster Join Date: Jan 2006 Location: Deep Blue G.S.M. Posts: 2,369 Member: 225229 Status: Offline Thanks Meter: 90	hafizjee has given the right solution, I have tested

06-23-2007, 20:49	#12 (permalink)
cool12 Junior Member Join Date: May 2004 Age: 46 Posts: 5 Member: 67105 Status: Offline Thanks Meter: 0	thanks dear, I'll try, but just a question???? all the posts gives a solution whitch is removing something, so why those components are on the board?, an electrical BUG to hang phone after purchase it?

04-26-2010, 14:51	#13 (permalink)
roopesh112007 Junior Member Join Date: Oct 2007 Location: india Age: 39 Posts: 15 Member: 600404 Status: Offline Sonork: rupesh Thanks Meter: 3	bro this component r ground when there value change then its drop more current or less current so mobile hangs or have any problem