u600 pcb needed - GSM-Forum

dtunam · 12-09-2007, 22:17

can someone tell me where i can buy a new pcb(mainboard) for my u600 mine is beyond repair

thanks dtunam

zacksonite · 02-07-2008, 15:59

1, take the 6 screws out from the board panel
2, take plastic covers off the other 2 screws under the phone
3, open back cover
4, remove pcb
5, remove imei sticker and open 6 screws
6, take out the 2 screws at the bottom of the slider
7, slide up the phone and it will come apart
8, de-solder the touch panel and change the lcd

12-09-2007, 22:17	#1 (permalink)
dtunam Junior Member Join Date: Jul 2004 Posts: 7 Member: 74236 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	u600 pcb needed can someone tell me where i can buy a new pcb(mainboard) for my u600 mine is beyond repair thanks dtunam

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
NOKIA 8310 need UEM schematic from PCB . need one line path:(	crossings	Nokia Hardware & Hardware-Repair Area	0	09-21-2004 09:37
RoEMMI PCB need	HighWay	Main Sales Section	0	05-30-2002 17:12
Cheapest EMMI BOX PCB needed	Deppe92	Main Sales Section	0	04-05-2002 01:35
6110 PCB needed	MySweetyLove	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	01-07-2002 10:33
SIM card reader PCB needed	satbox	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	10-22-2001 19:31

02-07-2008, 15:59	#2 (permalink)
zacksonite No Life Poster Join Date: Jun 2006 Posts: 614 Member: 289307 Status: Offline Thanks: 34 Thanked 31 Times in 28 Posts	1, take the 6 screws out from the board panel 2, take plastic covers off the other 2 screws under the phone 3, open back cover 4, remove pcb 5, remove imei sticker and open 6 screws 6, take out the 2 screws at the bottom of the slider 7, slide up the phone and it will come apart 8, de-solder the touch panel and change the lcd