c905 Earpiece solution needed please.

[Kurdy]

Hi dear,

How are you guys? My earphone is not working anymore, only when i hold and press C button. Can somebody tell me if i can fix it if i remove this parts only:

Or what is the best sollution? I have read some threads about to solder a wire from a to b? But i dont understand?

Please help me

Thank you!

[Kurdy]

I just want to know if i have to remove all the parts or just the front part? Because i dont want to dissemble my whole phone..??

[vtec_solutions@]

Originally Posted by Kurdy

I just want to know if i have to remove all the parts or just the front part? Because i dont want to dissemble my whole phone..??

if you have read jumper wire will fix then pal this is what you have to do to fix if you cant fix this << then take to somone else who can no futher help will be given to public people

[Kurdy]

Sorry for bothering, guys i just want to know if i can fix it by opening the front part only..i dont want dissemble the whole phone. and what is the easiest way to fix this problem?

Thank YOU..

[medo2004]

u dont need to dissemble the hole phone just the front cover and make a jumper from Earpiece right leg in flex to the any earth....just do it and .........done..........

[Kurdy]

Originally Posted by medo2004

u dont need to dissemble the hole phone just the front cover and make a jumper from Earpiece right leg in flex to the any earth....just do it and .........done..........

Thanks for reply. U mean like this? Can u explain what u mean by jumper? connect from the gold piece to ground? or? Thankss again

[Kurdy]

Guys i just want to know what jumper means.
And how will the solder work? Can someone please post a picture what i should solder and connect with?

[m&m]

dear you will chang the ribban or if you can give tha jumper to earpies wear

[dancho75]

change flex cable, audio chip defective(or brocken), he is outside

[Kurdy]

Thanks everybody, why the flex cable? Some said i cant use a small wire to connect from A to B? Or am i wrong? I will try the wire first because flex i have to dissemble everything. Can anyone show me the best way to fix it with a wire? And how can i solder it because there is nothing to solder on??? how will the wire be connected with ground?

[Kurdy]

Up...sorry again. But i just want my phone fixed. SE is so bad the last time. My k850 was bad, my k800 good but software problems, w800 bluetooth not working, k750 the best one, no problems at all...


Anyway please guys can someone please draw or tell me what i should solder and how??? just post a picture if you can

Thanksss

[medo2004]

ok just do that conect wire black one from right golden to any earth or look like picture exactly and forget a to b ....jumber mean conect betwen 2 compenants.....good luck.........i will wait u to said .....its done........

[Kurdy]

Thank you my friend i will try it by my self today or tomorrow.
1 more question, to remove the front part, i have to remove the sticker and open the two screws behind or more?? By the way, the golden part u talking about is plain(flat), will the solder work on it? i mean will it hold the wire on it?

[medo2004]

to remove front part u need to quied to a dissmble c905 u can find it in fourm....just use search....and the golden part as u say ..yes the solder work on it 100% and its work 100% with my way .dont ask again just do it and becarfull..or go to mobile service................good luck

[Momo_Gsm]

Originally Posted by kurdy

thanks for reply. U mean like this? Can u explain what u mean by jumper? Connect from the gold piece to ground? Or? Thankss again

tested before and working perfectly with many c905 phones. Br s a n s a r i.