Ericsson 10 power off Ericsson T10 power off when find network or make call. Ii's not PA (AND630), i change iy many times :((( Not Power IC... ???? |
battery??? |
i'am not stupid |
Dear You..... I need help with my T10s dead phone, I had been try with much ericsson software the software can detect my phone ID like version,imei,etc but the phone cant power on please help me. for help and solutions thank you somuch. best regards, gafyd45 |
hi all..just reball the DSP or if it is not BGA rehot it by pressing with tweezers on it..mostly it works..__jero__ |
For Mike727 have you tried to upload eeprom whit one good and flash phone?;) |
for mike727 check the antenna connector, there are two contacts and they should not touch each other because when is shorted to ground it will take lots amount of power for tx/rx hope this help |
check the battery |
Yes, check the battery. Clear precisely battery connections. |
mate you need to do hardware mod,where the batt pads are on the pcb yu need to solder 3 pads common fault |
All times are GMT +1. The time now is 15:58. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -