how to convert SE data cable into flashing cable - GSM-Forum

hasanz · 05-12-2008, 04:52

Hello, For quite sometime now I have been on the look-out for a service cable/flashing cable for my SE k300i. I read the thread on this forum and thought you guys might be able to help me out as I cant find a service cable in the market and making 1 on my own is the only means of having it. One more thing is that in this thread you have mentioned that on a data cable there are only 5 wires that are actually connected to pins on the plug but the cable that I have has got 9 wires connected to pins 1-8 and 10 (no wires connected to 9 n 11) so please I would request you to guide me about what I can do to convert or use this data cable as a flashing cable as well. The data cable that I have has got a total of 9 wires coming out of the plug that connects to the phone, I am pasting the pictures of it and also for convenience writing down the color of wire and which pin on the plug the colored wire is connected to.

BLACK connected to pin 2 BROWN connected to pin 4 RED connected to pin 6 GREEN connected to pin 8

ORANGE connected to pin 7 BLUE connected to pin 5 PURPLE connected to pin 3 GREY connected to pin 1 YELLOW connected to pin 10 The pins 9 and 11 have no wires connected to them. Now all the nine wires they are connected to the chip on either one of the sides as follows

In this pic the yellow(pin10) orange(pin7) red(pin6) brown(pin4) and black(pin2) wires are connected to the chip.

In this pic grey(pin1) purple(pin3) blue(pin5) and green(pin8) wires are connected to the chip.

In this pic (top) 4 wires are leading from the chip into the usb connector .. orange green blue and lite-yellow.

I pasted this picture to show a lighter-green wire connected at D2 which is looping backwards and connected at :

please help me out and tell me how to convert this data cable into flashing cable

TRABEL · 05-12-2008, 05:05

what do you mean by flashing cable ?
normal usb cable can flash se phones ....
so i lost you on request .......

hasanz · 05-12-2008, 05:09

well dcu-11 cable (for k300 n k700) as i have been led to believe, cant flash these fones. as i think the pins 9 n 11 wich are used for flashing are not connected. i have read many forums for SE like esato and se-nse and they all have given a tutorial for changing ur data bale to service cable, but they information they have provided, i somehow cant follow.

05-12-2008, 04:52	#1 (permalink)
hasanz Junior Member Join Date: Sep 2006 Posts: 29 Member: 360142 Status: Offline Thanks Meter: 4	how to convert SE data cable into flashing cable Hello, For quite sometime now I have been on the look-out for a service cable/flashing cable for my SE k300i. I read the thread on this forum and thought you guys might be able to help me out as I cant find a service cable in the market and making 1 on my own is the only means of having it. One more thing is that in this thread you have mentioned that on a data cable there are only 5 wires that are actually connected to pins on the plug but the cable that I have has got 9 wires connected to pins 1-8 and 10 (no wires connected to 9 n 11) so please I would request you to guide me about what I can do to convert or use this data cable as a flashing cable as well. The data cable that I have has got a total of 9 wires coming out of the plug that connects to the phone, I am pasting the pictures of it and also for convenience writing down the color of wire and which pin on the plug the colored wire is connected to. BLACK connected to pin 2 BROWN connected to pin 4 RED connected to pin 6 GREEN connected to pin 8 ORANGE connected to pin 7 BLUE connected to pin 5 PURPLE connected to pin 3 GREY connected to pin 1 YELLOW connected to pin 10 The pins 9 and 11 have no wires connected to them. Now all the nine wires they are connected to the chip on either one of the sides as follows In this pic the yellow(pin10) orange(pin7) red(pin6) brown(pin4) and black(pin2) wires are connected to the chip. In this pic grey(pin1) purple(pin3) blue(pin5) and green(pin8) wires are connected to the chip. In this pic (top) 4 wires are leading from the chip into the usb connector .. orange green blue and lite-yellow. I pasted this picture to show a lighter-green wire connected at D2 which is looping backwards and connected at : please help me out and tell me how to convert this data cable into flashing cable

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to convert a CDT document into PDF format?	WW284773	Java, iOS, Android, Symbian development	1	07-08-2009 07:19
how to convert se s710a ?	unlock & flash	Sony Ericsson	3	04-26-2009 07:13
HOW TO CONVERT N 2610b RH87 INTO 2610	pavitter	Nokia Hardware & Hardware Repair	1	05-11-2008 12:37
How to convert '.EYE' extention into .avi or .3gp???	godisgreat	Nokia Digital Core Technology 4 ( DCT-4 )	2	03-03-2005 06:13

05-12-2008, 05:05	#2 (permalink)
TRABEL No Life Poster Join Date: Feb 2003 Location: on the Moon ;) Age: 47 Posts: 2,797 Member: 21937 Status: Offline Thanks Meter: 279	what do you mean by flashing cable ? normal usb cable can flash se phones .... so i lost you on request .......

05-12-2008, 05:09	#3 (permalink)
hasanz Junior Member Join Date: Sep 2006 Posts: 29 Member: 360142 Status: Offline Thanks Meter: 4	well dcu-11 cable (for k300 n k700) as i have been led to believe, cant flash these fones. as i think the pins 9 n 11 wich are used for flashing are not connected. i have read many forums for SE like esato and se-nse and they all have given a tutorial for changing ur data bale to service cable, but they information they have provided, i somehow cant follow.