how i unlock k530

[tuntai]

how i unlock k530? i have ipmart setool3 with out actibition, plz help me i the very new person with setool. its veryurzent

thanks in advance

[calhinha]

Originally Posted by tuntai

how i unlock k530? i have ipmart setool3 with out actibition, plz help me i the very new person with setool. its veryurzent

thanks in advance

1 - First make info and see if you have restauration file, if not make download if yes is ok.
2 - Go to options a make the chose of Signed Mode + Enable Alternative security Bypass
3 - Unlock/repair and conect the fone whit usb normal cable touching in C , folow the instructions ( must have sim card test our sim card acept ) in the end of the process your fone is unlock

here the log :

Info:

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
FLASH ID: 897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35350002481483 CERT:RED
FLASH CID:52 COLOR:RED

Model (from GDFS):K530i
Brand:ORANGE F
MAPP CXC article: R8BB001 prgCXC1250981_ORANGE_NC
MAPP CXC version: R8BB001
Language Package: ORANGE_GEN
CDA article: CDA102823/43
CDA version: R10A
Default article: cxc1250959
Default version: R8BB001
PROVIDER: 208-01
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

SECURITY UNITS BACKUP CREATED.
Elapsed: 20 secs.

Unlock/Reapir:

SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110000000000
ChipID:9900,EMP protocol:0301

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35350002481483 CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 03
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID: 897E
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader GDFS startup executed
loader FILESYSTEM startup executed

DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
INSTALL PHONE MODEM DRIVERS IF NEEDED

(If dont have driver make download hear : www.nextgenserver.com/support/index.php?_m=downloads&_a=viewdownload&downloadite mid=11&nav=0,2 )

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM321
PHONE READY TO PROCEED
EXECUTOR STARTED

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
FINALLY PRESS "READY"

ChipID:9900,EMP protocol:0301

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
STARTING BOOTLOADER...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
FLASH ID: 897E
FOUND VERSION "R8BB001_CXC1250981_ORANGE_NC"
USERCODE RESET TO "0000"
Searching...
Firmware SIMLOCK check determined.
Unlock FINISHED
Elapsed: 209 secs.

[giti2k]

The upper method is patch unlock and if something happens your phone will be dead until you flash it. The easiest method which makes permanent unlock is this:
1. Hit identify to see the current phone CID
2. On settings tab hit SIGNED MODE, go back to the first tab, select phone model and click RESET - hold 2+5. When you are done phone will be in factory state.
3. Go to Empty FILL tab, select model, ADD file - setool dir\EROM\DB2020\ and select the file CID..RED. CID number will be the same as the first step. Click flash,hold 2+5 and your phone will be permanently unlocked in seconds without patch files, test sim cards and dead phone units because of REST files

BR,
Giti

[calhinha]

Originally Posted by giti2k

The upper method is patch unlock and if something happens your phone will be dead until you flash it. The easiest method which makes permanent unlock is this:
1. Hit identify to see the current phone CID
2. On settings tab hit SIGNED MODE, go back to the first tab, select phone model and click RESET - hold 2+5. When you are done phone will be in factory state.
3. Go to Empty FILL tab, select model, ADD file - setool dir\EROM\DB2020\ and select the file CID..RED. CID number will be the same as the first step. Click flash,hold 2+5 and your phone will be permanently unlocked in seconds without patch files, test sim cards and dead phone units because of REST files

BR,
Giti

You talk about setool lite??
The way i make log i dont need flash, only take 1/2 minutes and is permanent unlock.
I only make info to see if rest file is present and if yes i chose the correct options and unlock/repair, only two steps.
In patch you need use qmaker, simlock patch, download mai+fs+costum pack. and make all operations .
Correct me if i'm wrong please.
I only unlock by patch cellphones that dont have executor like k550i the rest of the models i make whit setool box version.
Stay well

[giti2k]

Originally Posted by calhinha

You talk about setool lite??
The way i make log i dont need flash, only take 1/2 minutes and is permanent unlock.
I only make info to see if rest file is present and if yes i chose the correct options and unlock/repair, only two steps.
In patch you need use qmaker, simlock patch, download mai+fs+costum pack. and make all operations .
Correct me if i'm wrong please.
I only unlock by patch cellphones that dont have executor like k550i the rest of the models i make whit setool box version.
Stay well

In your first post here :
1 - First make info and see if you have restauration file, if not make download if yes is ok.
2 - Go to options a make the chose of Signed Mode + Enable Alternative security Bypass
3 - Unlock/repair and conect the fone whit usb normal cable touching in C , folow the instructions ( must have sim card test our sim card acept ) in the end of the process your fone is unlock

,you are making patch unlock with executor, after that you have to go to games menu on the phone nad delete the executor because the customer is gonna start this application sooner or latter and the phone will be dead. So the procedure is no only half minute. With my way you can do it in a seconds. Furthermore setool lite can't do RESET action with server and set the phone in factory state. You are not flashing the phone but only the EROM - 2 secconds!