W300i camera flat - GSM-Forum

svukov21 · 04-09-2007, 17:28

Can someone help me to put back camera on a new flat cable on SE W300i. Problem is in orientation I didn't marked camera and flat on old flat cable before taking camera from it so now I don't know where is pin number 1 on camera and pin number 1 on cable. In attach is picture of camera and flat so if someone know how to orient camera on flat or maybe have one W300i on service (so he could picture camera and flat on working phone) please help me.

Thanks in advance.

VBR

P.S. You can see little point on cameras shield (and in my attachment) that is pin 1, but where is pin number 1 on flat cable?

svukov21 · 04-09-2007, 17:33

And the last part. Sorry for so much parts but I take high quality pictures so you can see better.

svukov21 · 04-10-2007, 10:13

Nobody???? Please someone help here.

abdulqadir_eee · 04-11-2007, 08:49

dont worry please take the defective main flex, in that main flex they given one round small mark, in camera also they given one small mark ,please check very well

svukov21 · 04-11-2007, 11:13

OK. Thanks for you reply.
I will try. My problem was that in new flat there is no any marks but in old original one I found one and now I'm going to try.

abdulqadir_eee · 04-11-2007, 12:09

if u cant search the point, put the camera i all one by one,nothing will happen,in any direction camera will work,and note the point,it will conformly works

svukov21 · 04-11-2007, 13:00

No, camera will not work in any direction I just try that to put cameras point (mark) according to old flat and there is no picture on display any more but if I take camera down (desoldered it) I get display picture working again. After that I try do twist camera for 90' and I have display working but if I want to take picture phone by itself exit from cameras menu and also there is only black screen when I open cameras menu and after 1 sec. it exits to main menu.

If you or someone can give precise place of camera or maybe edit picture in my attachment so I can put this s..t back please do?

Also if someone have full service manual (not the one that you can find on this forum) tell me is the pin number 1 on camera going to some kind of VCC or which pin is going on VCC with one big block condensator?

giantoida · 04-05-2012, 10:05

Quote:

Originally Posted by svukov21

And the last part. Sorry for so much parts but I take high quality pictures so you can see better.

thanks lot bro!!
that's usefull 4me!

nancan · 04-05-2012, 11:18

After that I try do twist camera for 90' and I have display working but if I want to take picture phone by itself exit from cameras menu and also there is only black screen.[IMG]http://www.***********/g.gif[/IMG]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
w300i camera replacement	ringtons	Sony Ericsson Hardware Repair	3	03-13-2010 15:54
w300i camera shield wanted	ringtons	Hardware Repair Item Wanted	0	10-22-2008 07:21
w300i camera shield wanted	ringtons	Wanted Products	1	10-06-2008 10:57
*W300i Camera Problem*	John(LMT)	Sony Ericsson Hardware Repair	0	09-12-2008 21:15
Nokia 6260 camera flat (or equivalent)	invision	Nokia Hardware & Hardware Repair	0	11-14-2006 02:01

04-10-2007, 10:13	#3 (permalink)
svukov21 Freak Poster Join Date: Nov 2001 Location: UK,London Posts: 301 Member: 7251 Status: Offline Thanks Meter: 15	Nobody???? Please someone help here.

04-11-2007, 08:49	#4 (permalink)
abdulqadir_eee Freak Poster Join Date: Mar 2007 Posts: 266 Member: 477363 Status: Offline Thanks Meter: 37	dont worry please take the defective main flex, in that main flex they given one round small mark, in camera also they given one small mark ,please check very well

04-11-2007, 11:13	#5 (permalink)
svukov21 Freak Poster Join Date: Nov 2001 Location: UK,London Posts: 301 Member: 7251 Status: Offline Thanks Meter: 15	OK. Thanks for you reply. I will try. My problem was that in new flat there is no any marks but in old original one I found one and now I'm going to try.

04-11-2007, 12:09	#6 (permalink)
abdulqadir_eee Freak Poster Join Date: Mar 2007 Posts: 266 Member: 477363 Status: Offline Thanks Meter: 37	if u cant search the point, put the camera i all one by one,nothing will happen,in any direction camera will work,and note the point,it will conformly works

04-11-2007, 13:00	#7 (permalink)
svukov21 Freak Poster Join Date: Nov 2001 Location: UK,London Posts: 301 Member: 7251 Status: Offline Thanks Meter: 15	No, camera will not work in any direction I just try that to put cameras point (mark) according to old flat and there is no picture on display any more but if I take camera down (desoldered it) I get display picture working again. After that I try do twist camera for 90' and I have display working but if I want to take picture phone by itself exit from cameras menu and also there is only black screen when I open cameras menu and after 1 sec. it exits to main menu. If you or someone can give precise place of camera or maybe edit picture in my attachment so I can put this s..t back please do? Also if someone have full service manual (not the one that you can find on this forum) tell me is the pin number 1 on camera going to some kind of VCC or which pin is going on VCC with one big block condensator?

04-05-2012, 11:18	#9 (permalink)
nancan Junior Member Join Date: Mar 2012 Posts: 6 Member: 1742052 Status: Offline Thanks Meter: 1	After that I try do twist camera for 90' and I have display working but if I want to take picture phone by itself exit from cameras menu and also there is only black screen.[IMG]http://www.***********/g.gif[/IMG]