Problem with flashing K800 - GSM-Forum

Joda · 11-25-2010, 20:38

Here is the log from SETool:

SIGNED MODE (USING SERVER)
CFG:101000000000
ChipID:9900,EMP protocol:0301

PHONE STATE: "RETAIL"
FLASH CID: 0051
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35471601206200 CERT:RED
ACTIVE CID:51 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID: 2019
writing "D:\mobile\setool 1.09\flash\K800\CID 51 RED\R1GB001_1250210_GENERIC_WI.ssw.cry"
CURRENT FLASH FILE CID:51
SSW uses full hash, hash len is: 9100
Will flash 455 blocks...
llbug:blk write fail.fatal
packet not acknowledged (01)
subblock 010 NAK, [45C10000/00010000]
Elapsed: 229 secs.

I don't know what can I do.
I can not flash it.
Please some advice would be very good.

Alejo00 · 11-25-2010, 20:50

If you are trying to flash by usb port Try to flash by serial port with the same firmware

Alejo00
post results

Joda · 11-25-2010, 21:13

I was flashed it with serial port but It would not power on the phone and cant start to flashing... :-(

Joda · 11-25-2010, 23:33

I flashed the phone a lot of time and all the time it stops on the same time.
and I get all the time this error:
llbug:blk write fail.fatal
packet not acknowledged (01)
subblock 010 NAK, [45C10000/00010000]

Does anybody have an idea what to do?
I was rewritten the GDFS too but nothing positive.....
Phone still death.

Joda · 11-26-2010, 09:16

Is here somebody who know what is happening with this K800i?
Nobody? :-(

Joda · 11-26-2010, 22:49

Nobody knows what this error in SETool mean?
Have anybody an idea?
I'm really need help about flashing this phone please....
here is the error message:
llbug:blk write fail.fatal
packet not acknowledged (01)
subblock 010 NAK, [45C10000/00010000]

11-25-2010, 20:38	#1 (permalink)
Joda Freak Poster Join Date: Nov 2005 Posts: 128 Member: 201816 Status: Offline Thanks Meter: 6	Problem with flashing K800 Here is the log from SETool: SIGNED MODE (USING SERVER) CFG:101000000000 ChipID:9900,EMP protocol:0301 PHONE STATE: "RETAIL" FLASH CID: 0051 Speed:921600 OTP LOCKED:1 CID:51 PAF:1 IMEI:35471601206200 CERT:RED ACTIVE CID:51 COLOR:RED PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0 LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015 FLASH ID: 2019 writing "D:\mobile\setool 1.09\flash\K800\CID 51 RED\R1GB001_1250210_GENERIC_WI.ssw.cry" CURRENT FLASH FILE CID:51 SSW uses full hash, hash len is: 9100 Will flash 455 blocks... llbug:blk write fail.fatal packet not acknowledged (01) subblock 010 NAK, [45C10000/00010000] Elapsed: 229 secs. I don't know what can I do. I can not flash it. Please some advice would be very good.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

11-25-2010, 20:50	#2 (permalink)
Alejo00 Insane Poster Join Date: Aug 2006 Posts: 44 Member: 337857 Status: Offline Thanks Meter: 4	If you are trying to flash by usb port Try to flash by serial port with the same firmware Alejo00 post results

11-25-2010, 21:13	#3 (permalink)
Joda Freak Poster Join Date: Nov 2005 Posts: 128 Member: 201816 Status: Offline Thanks Meter: 6	I was flashed it with serial port but It would not power on the phone and cant start to flashing... :-(

11-25-2010, 23:33	#4 (permalink)
Joda Freak Poster Join Date: Nov 2005 Posts: 128 Member: 201816 Status: Offline Thanks Meter: 6	I flashed the phone a lot of time and all the time it stops on the same time. and I get all the time this error: llbug:blk write fail.fatal packet not acknowledged (01) subblock 010 NAK, [45C10000/00010000] Does anybody have an idea what to do? I was rewritten the GDFS too but nothing positive..... Phone still death.

11-26-2010, 09:16	#5 (permalink)
Joda Freak Poster Join Date: Nov 2005 Posts: 128 Member: 201816 Status: Offline Thanks Meter: 6	Is here somebody who know what is happening with this K800i? Nobody? :-(

11-26-2010, 22:49	#6 (permalink)
Joda Freak Poster Join Date: Nov 2005 Posts: 128 Member: 201816 Status: Offline Thanks Meter: 6	Nobody knows what this error in SETool mean? Have anybody an idea? I'm really need help about flashing this phone please.... here is the error message: llbug:blk write fail.fatal packet not acknowledged (01) subblock 010 NAK, [45C10000/00010000]