GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Sony Ericsson Hardware Repair (https://forum.gsmhosting.com/vbb/f261/)
-   -   SE t100 probem. (https://forum.gsmhosting.com/vbb/f261/se-t100-probem-96043/)

fone 07-30-2003 19:03

SE t100 probem.
 
Two sony-ericsson T100 .
1.phone got problem with keyborad failure ,it can press power on button Yes and No (on and off phone only).
2.other phone is that it show handfree on LCD alway.

Please advice and guide for me
thank you

it was not software repair.

marple 07-30-2003 23:50

second T100 maybe have litle water on the conector for charging,unsolder conector,clean them and after that put him back,for first T100 try to clean keypad on the phone

pali 08-04-2003 11:39

i have SE t100 , freezing and too slow
any idea?

b.r.

Pali

supremegsm 08-05-2003 15:18

Try doing a software update...and even then if its slow, change the crystal.

CellM@n 08-05-2003 16:54

if only on/off button can be used. Just pull out ur volume button, all hang problem will cure. Replace it.!!

for 2nd. have no idea yet ...

:))

platy 02-24-2004 20:11

Hello
i have the same problem SE T100 always in Hands Free mode :mad: :mad:
phone is clean - no water.
i tryed to repair sw, remove system conector - still the same

any idea?
Thanx
Platy

fone 02-26-2004 16:16

Quote:

Originally Posted by platy
Hello
i have the same problem SE T100 always in Hands Free mode :mad: :mad:
phone is clean - no water.
i tryed to repair sw, remove system conector - still the same

any idea?
Thanx
Platy

handfree mode ,you remove six- pin IC where under keyboared ;it is first

cellnet 02-27-2004 19:08

Quote:

Originally Posted by fone
Two sony-ericsson T100 .
1.phone got problem with keyborad failure ,it can press power on button Yes and No (on and off phone only).
2.other phone is that it show handfree on LCD alway.

Please advice and guide for me
thank you

it was not software repair.


1.Rehot the CPU with many flux..tested 100%
2.remove the six pin ic

fone 02-28-2004 19:28

re
 
Quote:

Originally Posted by cellnet
1.Rehot the CPU with many flux..tested 100%
2.remove the six pin ic

1.keypad not good you must check side switch, not CPU

jojora 03-27-2004 02:50

SonyEricsson T106
 
:confused: :(

Necesito un flash para un T106 R4D arm para flashear con terminator, o que alguien me diga donde puedo bajarme una.

Gracias de corazon.

Saludos al foro


I need a flash for a T106 R4D arm to flash with terminator, or that somebody says to me where I can lower one.

Thanks of heart.


Greetings to the forum

hooi76 04-13-2004 04:57

i have a water damaged SE T100 keyboard phone. I clean it and the keyboard is working but the speaker and mic is not working when making a call. I can't hear from that side and that side can't hear my voice too. :(
In SERVICE TEST mode >*<<*<* i can hear mic sound from the speaker and the speaker is working too (BEEPING when pressing the keys)

Please guide

BANTUGBRO 04-25-2004 15:01

Hi hooi76,
Try to replace the E62 three legged ic positioned at the bottom of the keypad and the problem will be solved.
WBR,
BANTUGBRO.
Quote:

Originally Posted by hooi76
i have a water damaged SE T100 keyboard phone. I clean it and the keyboard is working but the speaker and mic is not working when making a call. I can't hear from that side and that side can't hear my voice too. :(
In SERVICE TEST mode >*<<*<* i can hear mic sound from the speaker and the speaker is working too (BEEPING when pressing the keys)

Please guide


hooi76 04-26-2004 12:40

Hi, thanks for your kind reply, where can i get this E62 IC? I mean is there any compatibles from other phones to SE T100? I don't have this IC at all.

BANTUGBRO 04-26-2004 17:32

You can get it even from siemens a35 scrap Pcb not necessarily it should be writen E62 on it but they should look similar thats important.
WBR,
BANTUGBRO.
Quote:

Originally Posted by hooi76
Hi, thanks for your kind reply, where can i get this E62 IC? I mean is there any compatibles from other phones to SE T100? I don't have this IC at all.


hooi76 04-26-2004 17:57

looks similar? do u know the code? thanks in advace


All times are GMT +1. The time now is 15:00.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.13896 seconds with 6 queries

SEO by vBSEO