SE t100 probem. - GSM-Forum

fone · 07-30-2003, 19:03

Two sony-ericsson T100 .
1.phone got problem with keyborad failure ,it can press power on button Yes and No (on and off phone only).
2.other phone is that it show handfree on LCD alway.

Please advice and guide for me
thank you

it was not software repair.

marple · 07-30-2003, 23:50

second T100 maybe have litle water on the conector for charging,unsolder conector,clean them and after that put him back,for first T100 try to clean keypad on the phone

pali · 08-04-2003, 11:39

i have SE t100 , freezing and too slow
any idea?

b.r.

Pali

supremegsm · 08-05-2003, 15:18

Try doing a software update...and even then if its slow, change the crystal.

CellM@n · 08-05-2003, 16:54

if only on/off button can be used. Just pull out ur volume button, all hang problem will cure. Replace it.!!

for 2nd. have no idea yet ...

)

platy · 02-24-2004, 20:11

Hello
i have the same problem SE T100 always in Hands Free mode

phone is clean - no water.
i tryed to repair sw, remove system conector - still the same

any idea?
Thanx
Platy

fone · 02-26-2004, 16:16

Quote:

Originally Posted by platy

Hello
i have the same problem SE T100 always in Hands Free mode

phone is clean - no water.
i tryed to repair sw, remove system conector - still the same

any idea?
Thanx
Platy

handfree mode ,you remove six- pin IC where under keyboared ;it is first

cellnet · 02-27-2004, 19:08

Quote:

Originally Posted by fone

Two sony-ericsson T100 .
1.phone got problem with keyborad failure ,it can press power on button Yes and No (on and off phone only).
2.other phone is that it show handfree on LCD alway.

Please advice and guide for me
thank you

it was not software repair.

1.Rehot the CPU with many flux..tested 100%
2.remove the six pin ic

fone · 02-28-2004, 19:28

Quote:

Originally Posted by cellnet

1.Rehot the CPU with many flux..tested 100%
2.remove the six pin ic

1.keypad not good you must check side switch, not CPU

jojora · 03-27-2004, 02:50

Necesito un flash para un T106 R4D arm para flashear con terminator, o que alguien me diga donde puedo bajarme una.

Gracias de corazon.

Saludos al foro

I need a flash for a T106 R4D arm to flash with terminator, or that somebody says to me where I can lower one.

Thanks of heart.

Greetings to the forum

hooi76 · 04-13-2004, 04:57

i have a water damaged SE T100 keyboard phone. I clean it and the keyboard is working but the speaker and mic is not working when making a call. I can't hear from that side and that side can't hear my voice too.

In SERVICE TEST mode >*<<*<* i can hear mic sound from the speaker and the speaker is working too (BEEPING when pressing the keys)

Please guide

BANTUGBRO · 04-25-2004, 15:01

Hi hooi76,
Try to replace the E62 three legged ic positioned at the bottom of the keypad and the problem will be solved.
WBR,
BANTUGBRO.

Quote:

Originally Posted by hooi76

i have a water damaged SE T100 keyboard phone. I clean it and the keyboard is working but the speaker and mic is not working when making a call. I can't hear from that side and that side can't hear my voice too.

In SERVICE TEST mode >*<<*<* i can hear mic sound from the speaker and the speaker is working too (BEEPING when pressing the keys)

Please guide

hooi76 · 04-26-2004, 12:40

Hi, thanks for your kind reply, where can i get this E62 IC? I mean is there any compatibles from other phones to SE T100? I don't have this IC at all.

BANTUGBRO · 04-26-2004, 17:32

You can get it even from siemens a35 scrap Pcb not necessarily it should be writen E62 on it but they should look similar thats important.
WBR,
BANTUGBRO.

Quote:

Originally Posted by hooi76

Hi, thanks for your kind reply, where can i get this E62 IC? I mean is there any compatibles from other phones to SE T100? I don't have this IC at all.

hooi76 · 04-26-2004, 17:57

looks similar? do u know the code? thanks in advace

07-30-2003, 19:03	#1 (permalink)
fone Freak Poster Join Date: Nov 2002 Location: MX-KEY is the BEST NOKIA TOOL Age: 49 Posts: 366 Member: 17367 Status: Offline Thanks Meter: 16	SE t100 probem. Two sony-ericsson T100 . 1.phone got problem with keyborad failure ,it can press power on button Yes and No (on and off phone only). 2.other phone is that it show handfree on LCD alway. Please advice and guide for me thank you it was not software repair.

03-27-2004, 02:50	#10 (permalink)
jojora Junior Member Join Date: Apr 2003 Posts: 4 Member: 27157 Status: Offline Thanks Meter: 0	SonyEricsson T106 Necesito un flash para un T106 R4D arm para flashear con terminator, o que alguien me diga donde puedo bajarme una. Gracias de corazon. Saludos al foro I need a flash for a T106 R4D arm to flash with terminator, or that somebody says to me where I can lower one. Thanks of heart. Greetings to the forum

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SE t100 probem.	fone	Sony Ericsson Hardware Repair	1	04-29-2004 11:02
SE T100 data software	stigor	Sony Ericsson Media, RingTones, Games	0	06-17-2003 06:41
SE T100 R7A - anyone have that flash?	XSFlood	Sony Ericsson	5	06-15-2003 13:45
SE T100 and SE total tool	jb-2003	Sony Ericsson	1	06-11-2003 15:03
Se T100 Unlock (net)00 How To Solve	SoftSkiner	Sony Ericsson	2	05-09-2003 12:15

07-30-2003, 23:50	#2 (permalink)
marple No Life Poster Join Date: Mar 2003 Location: Europe Age: 54 Posts: 788 Member: 24581 Status: Offline Thanks Meter: 87	second T100 maybe have litle water on the conector for charging,unsolder conector,clean them and after that put him back,for first T100 try to clean keypad on the phone

08-04-2003, 11:39	#3 (permalink)
pali No Life Poster Join Date: Nov 2001 Location: Slovakia Posts: 1,005 Member: 7586 Status: Offline Thanks Meter: 11	i have SE t100 , freezing and too slow any idea? b.r. Pali

08-05-2003, 15:18	#4 (permalink)
supremegsm Freak Poster Join Date: Apr 2003 Age: 47 Posts: 340 Member: 25763 Status: Offline Thanks Meter: 18	Try doing a software update...and even then if its slow, change the crystal.

08-05-2003, 16:54	#5 (permalink)
CellM@n No Life Poster Join Date: Feb 2001 Location: Planet EARTH Age: 50 Posts: 1,209 Member: 3194 Status: Offline Thanks Meter: 41	if only on/off button can be used. Just pull out ur volume button, all hang problem will cure. Replace it.!! for 2nd. have no idea yet ... )

02-24-2004, 20:11	#6 (permalink)
platy Freak Poster Join Date: Mar 2001 Location: Czech Republic Posts: 295 Member: 3714 Status: Offline Thanks Meter: 6	Hello i have the same problem SE T100 always in Hands Free mode phone is clean - no water. i tryed to repair sw, remove system conector - still the same any idea? Thanx Platy

04-13-2004, 04:57	#11 (permalink)
hooi76 No Life Poster Join Date: Dec 2001 Location: In front of my computer Posts: 1,594 Member: 7741 Status: Offline Thanks Meter: 111	i have a water damaged SE T100 keyboard phone. I clean it and the keyboard is working but the speaker and mic is not working when making a call. I can't hear from that side and that side can't hear my voice too. In SERVICE TEST mode ><<<* i can hear mic sound from the speaker and the speaker is working too (BEEPING when pressing the keys) Please guide

04-26-2004, 12:40	#13 (permalink)
hooi76 No Life Poster Join Date: Dec 2001 Location: In front of my computer Posts: 1,594 Member: 7741 Status: Offline Thanks Meter: 111	Hi, thanks for your kind reply, where can i get this E62 IC? I mean is there any compatibles from other phones to SE T100? I don't have this IC at all.

04-26-2004, 17:57	#15 (permalink)
hooi76 No Life Poster Join Date: Dec 2001 Location: In front of my computer Posts: 1,594 Member: 7741 Status: Offline Thanks Meter: 111	looks similar? do u know the code? thanks in advace