Sony Ericsson F305 disassembly

[gagan_o5]

Remove your back cover, battery, sim and memory card


Starting near the bottom of the phone, lift the bezel away from the phone. It just clips on and off



With the bezel removed your phone should look like below. Remove the six screws you can see



Turn the phone over and starting near the top of the phone, run something like a credit card around the join of the front cover to release it



Your phone should now look like below. The keypad membrane needs to be levered up at the two points circled below.



You now have access to two ribbons. Release each ribbon by flicking the black/brown latches back and then pull each ribbon away.



Now slide your plastic tool underneath the LCD screen to release it.



You should now have the LCD screen removed. Reverse the whole procedure for reassembly

[BONDIE_86]

Hi all,

I have an F305 with display problem. When you turn the phone on all seems as it should but after using the phone for a few minutes the writing is displayed backwards, like as if you were looking at the phone through a mirror, is this likely to be the flex cable? Also sometimes when you slide the phone open the screen goes completely white and needs the battery pulling out to turn the phone off but when you turn it back on it is ok again...

BR,
BONDIE_86

[gagan_o5]

try to flash ur phone with latest version..may be ur problem solved......







br
gagan

[BONDIE_86]

Where can I find latest version? How come there is no F305 on SE PC Suite repair section? Also, I've been reading on the internet that lots of people have many problems after flashing F305 ... Anybody successfully flashed F305? Also, there is no section to check the current software on the phone, it is under [UPDATE SERVICE > SOFTWARE VERSION] on other models, where can I find it on F305?

BR,
BONDIE_86

[gagan_o5]

use setool for flashing f305 and flash file u can download from setool support site....




br
gagan