sony j70 low tx level - GSM-Forum

ogosh · 07-03-2003, 16:49

hi to all, i have strange problem with j70 - very low tx power,
I'd change P.A.- nothing, reflash also, but the problem remain
Can sombody help me?

Syed · 07-03-2003, 17:17

try adjusting it with CTETERMINAL i think there are commands there for adjusting Rx Tx power but i never tested it personally...

WBR
Syed

Professor · 07-25-2003, 23:06

i have 2 phones with same problem.
tried change almost all in RF-part and problem not solved.
anybody have new idea ?

george gsm · 07-28-2003, 01:40

hi profi,
if u changed already all write a new flash inside and run cte terminal-sldefault and factoryreset
b.r.
geo.

p.s. if u need some files ask [email protected]
172236879 icq

Professor · 07-28-2003, 02:41

george gsm, hi .
heh

all that you say i tried first, before soldering

My SW for these phones tested many times and works fine.

Today i have 3 phones with same problem

)
-in 1st only low Tx level
-in second low Tx level and this phone permanently locked and never will be unlocked. Flashing OK, but CTE terminal dont work with this phone... i think dead some sectors inside flash.
-in 3d low Tx level + silent small speaker(speaker tested, from working phone),, but big speaker works fine

07-03-2003, 16:49	#1 (permalink)
ogosh Junior Member Join Date: Jul 2003 Location: sofia Bulgaria Age: 47 Posts: 9 Member: 33257 Status: Offline Thanks Meter: 0	sony j70 low tx level hi to all, i have strange problem with j70 - very low tx power, I'd change P.A.- nothing, reflash also, but the problem remain Can sombody help me?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Samsung T100_very low microphone level.	plruzza	Samsung Hardware Repair	0	06-15-2003 00:42
sony j7 - low signal level	L_DIM	Sony Ericsson Hardware Repair	0	02-01-2003 11:27
N6210 very low network level at 900Mhz	Disaster	Nokia Hardware & Hardware Repair	8	01-23-2003 08:57
3210 TX level always 51 ? ? ?	legija	Nokia Hardware & Hardware Repair	5	11-13-2002 16:09
Adjustments of the transmitter in Ericsson T28(rx/tx level calibration)	jonwillow	Sony Ericsson Hardware Repair	0	10-14-2001 12:32

07-03-2003, 17:17	#2 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	try adjusting it with CTETERMINAL i think there are commands there for adjusting Rx Tx power but i never tested it personally... WBR Syed

07-25-2003, 23:06	#3 (permalink)
Professor Insane Poster Join Date: Jun 2002 Location: Russia Age: 49 Posts: 60 Member: 12511 Status: Offline Thanks Meter: 0	i have 2 phones with same problem. tried change almost all in RF-part and problem not solved. anybody have new idea ?

07-28-2003, 01:40	#4 (permalink)
george gsm No Life Poster Join Date: Jul 2002 Location: Bucharest-Romania Age: 51 Posts: 1,160 Member: 14200 Status: Offline Sonork: Sonork id Thanks Meter: 117	hi profi, if u changed already all write a new flash inside and run cte terminal-sldefault and factoryreset b.r. geo. p.s. if u need some files ask [email protected] 172236879 icq

07-28-2003, 02:41	#5 (permalink)
Professor Insane Poster Join Date: Jun 2002 Location: Russia Age: 49 Posts: 60 Member: 12511 Status: Offline Thanks Meter: 0	george gsm, hi . heh all that you say i tried first, before soldering My SW for these phones tested many times and works fine. Today i have 3 phones with same problem ) -in 1st only low Tx level -in second low Tx level and this phone permanently locked and never will be unlocked. Flashing OK, but CTE terminal dont work with this phone... i think dead some sectors inside flash. -in 3d low Tx level + silent small speaker(speaker tested, from working phone),, but big speaker works fine