Sony w380 dead after change flex - GSM-Forum

abdulsajem · 12-03-2008, 04:39

The phone turned on,

i change the flex and not to turn back or with the old nor the new, universal and setool reads it, but not turned on someone has happened

Regards

MEME BLANCO · 02-12-2009, 00:41

I have the same problem too, remove camera and works again some flex dont recognize the camera,,, if you put another camera the mobile dont power on...

yozh · 11-27-2009, 05:33

that happends with bad camera position, search the correct position and phone will turn on again.

12-03-2008, 04:39	#1 (permalink)
abdulsajem Junior Member Join Date: Jul 2007 Posts: 33 Member: 553404 Status: Offline Thanks Meter: 0	Sony w380 dead after change flex The phone turned on, i change the flex and not to turn back or with the old nor the new, universal and setool reads it, but not turned on someone has happened Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6111 dead after changing flex cable	yellowcom	Nokia Hardware & Hardware Repair	1	06-22-2009 10:47
E350 dead After Change Flex	flechazo	Samsung Hardware Repair	2	06-05-2006 12:34
strage things after changing flex on a 8110. cruiser sees AMD prototype inside ?!	Alinus	Cruiser Suite	0	07-05-2005 12:48
v70 usa t-mob , after change flex for 900/1800 not work good	--==Dixon==--	Motorola P2k	1	03-17-2005 17:42
Sony J5_no Vibrator After Change Buzzer	ARC	Sony Ericsson Hardware Repair	1	04-29-2002 08:39

02-12-2009, 00:41	#2 (permalink)
MEME BLANCO Major Poster Join Date: Nov 2008 Posts: 47 Member: 904271 Status: Offline Thanks Meter: 3	*I have the same problem too, remove camera and works again some flex dont recognize the camera,,, if you put another camera the mobile dont power on...*

11-27-2009, 05:33	#3 (permalink)
yozh Freak Poster Join Date: Oct 2004 Location: Mars Posts: 290 Member: 87284 Status: Offline Thanks Meter: 23	that happends with bad camera position, search the correct position and phone will turn on again.