T610 antenna connection - GSM-Forum

coolvines2000 · 06-25-2005, 06:42

i have a t610 damage antena pin connector damage, need help, pcb damage ,need connection

mobilesmith · 06-29-2005, 13:17

u can direct jump a wire from external antenna plug contact, it can works...

coolvines2000 · 07-12-2005, 15:40

antenna pin connector damage from pcb. need help pls, dont know were to start my jumpers

coolvines2000 · 07-12-2005, 15:41

antenna pin connector damage from pcb. need help pls, dont know were to start my jumpers, antenna plug contacts are all destroyed

mobilesmith · 07-13-2005, 07:31

Hi. cool. this would help u....

coolvines2000 · 07-13-2005, 15:41

@ mobilesmith

thanks bro, but still confused, after making a jumper at pic1 were will whats next, all copper pads in my t610 are destroyed, no were to make a jumper

mobilesmith · 07-14-2005, 05:41

hi. still confuse? then u can jump a wire from a capacitor after the antenna switch direct to antenna socket pin.if the antenna socket is away from m/b, u can use poxy to reposition.then sure got full RSSI strengh. Good luck

coolvines2000 · 07-15-2005, 02:23

still have problem , it in the asttchment , all pin socket destroyed

coolvines2000 · 07-15-2005, 02:25

thats why i dont know were to put the jumper , that came for the capacitor

mobilesmith · 07-19-2005, 07:22

ooooooooooooooooo...........GOOD LUCK

coolvines2000 · 07-21-2005, 00:58

this is my problem hope you could do sumthin

mobilesmith · 07-21-2005, 07:19

The pic. i upload again..
All u have to do is connect a wire as i highlighted, the rest of the contact is go to ground, so can connect any of the grounding point nearby.

coolvines2000 · 07-21-2005, 16:13

tnx my may problem solve , wooowoooowoowwooooweeee!!!!

coolvines2000 · 07-21-2005, 16:14

tnx my man problem solve , wooowoooowoowwooooweeee!!!!

06-25-2005, 06:42	#1 (permalink)
coolvines2000 Insane Poster Join Date: Mar 2003 Location: Santa Rosa laguna. Philippines Age: 48 Posts: 66 Member: 23752 Status: Offline Thanks Meter: 7	T610 antenna connection i have a t610 damage antena pin connector damage, need help, pcb damage ,need connection

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
T610 antenna	nitinkumar5	Sony Ericsson Hardware Repair	0	02-10-2009 18:03
t610 antenna ways (x400)	X8000	Sony Ericsson Hardware Repair	0	03-30-2006 02:35
T610 Antenna Problem???	solidhit	Sony Ericsson Hardware Repair	1	07-25-2005 02:01
t610 antenna	gabiz_ro	Sony Ericsson Hardware Repair	4	09-07-2004 21:58
Replace T610 antenna with a T616 antenna?	verbal11	Sony Ericsson	6	02-11-2004 21:44

06-29-2005, 13:17	#2 (permalink)
mobilesmith Freak Poster Join Date: Feb 2005 Location: mal Age: 46 Posts: 348 Member: 117968 Status: Offline Thanks Meter: 27	u can direct jump a wire from external antenna plug contact, it can works...

07-12-2005, 15:40	#3 (permalink)
coolvines2000 Insane Poster Join Date: Mar 2003 Location: Santa Rosa laguna. Philippines Age: 48 Posts: 66 Member: 23752 Status: Offline Thanks Meter: 7	antenna pin connector damage from pcb. need help pls, dont know were to start my jumpers

07-12-2005, 15:41	#4 (permalink)
coolvines2000 Insane Poster Join Date: Mar 2003 Location: Santa Rosa laguna. Philippines Age: 48 Posts: 66 Member: 23752 Status: Offline Thanks Meter: 7	antenna pin connector damage from pcb. need help pls, dont know were to start my jumpers, antenna plug contacts are all destroyed

07-13-2005, 15:41	#6 (permalink)
coolvines2000 Insane Poster Join Date: Mar 2003 Location: Santa Rosa laguna. Philippines Age: 48 Posts: 66 Member: 23752 Status: Offline Thanks Meter: 7	@ mobilesmith thanks bro, but still confused, after making a jumper at pic1 were will whats next, all copper pads in my t610 are destroyed, no were to make a jumper

07-14-2005, 05:41	#7 (permalink)
mobilesmith Freak Poster Join Date: Feb 2005 Location: mal Age: 46 Posts: 348 Member: 117968 Status: Offline Thanks Meter: 27	hi. still confuse? then u can jump a wire from a capacitor after the antenna switch direct to antenna socket pin.if the antenna socket is away from m/b, u can use poxy to reposition.then sure got full RSSI strengh. Good luck

07-15-2005, 02:25	#9 (permalink)
coolvines2000 Insane Poster Join Date: Mar 2003 Location: Santa Rosa laguna. Philippines Age: 48 Posts: 66 Member: 23752 Status: Offline Thanks Meter: 7	thats why i dont know were to put the jumper , that came for the capacitor

07-19-2005, 07:22	#10 (permalink)
mobilesmith Freak Poster Join Date: Feb 2005 Location: mal Age: 46 Posts: 348 Member: 117968 Status: Offline Thanks Meter: 27	ooooooooooooooooo...........GOOD LUCK

07-21-2005, 16:13	#13 (permalink)
coolvines2000 Insane Poster Join Date: Mar 2003 Location: Santa Rosa laguna. Philippines Age: 48 Posts: 66 Member: 23752 Status: Offline Thanks Meter: 7	tnx my may problem solve , wooowoooowoowwooooweeee!!!!

07-21-2005, 16:14	#14 (permalink)
coolvines2000 Insane Poster Join Date: Mar 2003 Location: Santa Rosa laguna. Philippines Age: 48 Posts: 66 Member: 23752 Status: Offline Thanks Meter: 7	tnx my man problem solve , wooowoooowoowwooooweeee!!!!