t610 with please wait on taking camera - GSM-Forum

GOODNESS · 09-30-2005, 20:53

i got dis phone ,t610, i have only twister.i have have flashed mcu+mod+gdf
and still d same.

mobilesmith · 10-02-2005, 08:19

hi. tracer. i also met this problem before , it can be done if - reflash firmware mcu/mod/gdfs. on 50% , replace camera module/resolder camera socket on 40% , replace modem flash/D700 ic on 30% , replace CPU D600 is on 20% , replace N910 (supply for camera) is on 10%.
Have u try these before?

GOODNESS · 10-04-2005, 19:23

i have only done flashing mcu+mod+gdfs .the fact how can i get these ic"s
and buy.we dont have someone selling it here.

fingusio · 10-04-2005, 20:21

Noooo!!!! Noone cpu, module, replace modem!!

You must flash MCU+MOD with same version, first try on R6Cxxx version if after that will be the same then flash on R4C005 version MCU+MOD!!!! on 100% will be ok.

br.
fingusio

Aloservice · 10-19-2005, 11:50

I got one here with the same problem
How can i solve this with cruiser??/
Any sugestion ???

gsm4sp · 10-26-2005, 01:52

This Solution Is Software 100%%% I Tested Mcu = Mod
Reg

.:Kuku:. · 10-27-2005, 13:09

u are all wrong

that is hardware problem

we solved near about 20 sets with that faulty

no need to flash.... no need to gdfs or other thing...solution is in hardware

Br
Kuku

09-30-2005, 20:53	#1 (permalink)
GOODNESS Banned Join Date: Feb 2004 Location: Portharcourt,Nigeria Posts: 826 Member: 89584 Status: Offline Thanks: 0 Thanked 66 Times in 33 Posts	t610 with please wait on taking camera i got dis phone ,t610, i have only twister.i have have flashed mcu+mod+gdf and still d same.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
c130 please wait on screen	lavlesh jain	Samsung Hardware Repair Area	1	03-14-2009 18:49
Z600 please wait on camera???	FMC_GSM	Sony Ericsson	0	08-15-2007 07:34
t610 and t630 camera please wait......	the eraser	Sony Ericsson	5	12-01-2006 11:22
Iternal please wait on CID 49	y_not	Cruiser Suite	1	06-17-2006 04:09
t610 HANGS AND REBOOTS AFTER TAKING CAMERA CLIP	mobilemafia	Sony Ericsson	0	08-23-2003 09:56

10-02-2005, 08:19	#2 (permalink)
mobilesmith Freak Poster Join Date: Feb 2005 Location: mal Age: 35 Posts: 343 Member: 117968 Status: Offline Thanks: 0 Thanked 27 Times in 12 Posts	hi. tracer. i also met this problem before , it can be done if - reflash firmware mcu/mod/gdfs. on 50% , replace camera module/resolder camera socket on 40% , replace modem flash/D700 ic on 30% , replace CPU D600 is on 20% , replace N910 (supply for camera) is on 10%. Have u try these before?

10-04-2005, 19:23	#3 (permalink)
GOODNESS Banned Join Date: Feb 2004 Location: Portharcourt,Nigeria Posts: 826 Member: 89584 Status: Offline Thanks: 0 Thanked 66 Times in 33 Posts	i have only done flashing mcu+mod+gdfs .the fact how can i get these ic"s and buy.we dont have someone selling it here.

10-04-2005, 20:21	#4 (permalink)
fingusio No Life Poster Join Date: Oct 2002 Location: Logs, Codes Age: 30 Posts: 2,178 Member: 16927 Status: Offline Sonork: 100.1592866 Thanks: 339 Thanked 103 Times in 71 Posts	Noooo!!!! Noone cpu, module, replace modem!! You must flash MCU+MOD with same version, first try on R6Cxxx version if after that will be the same then flash on R4C005 version MCU+MOD!!!! on 100% will be ok. br. fingusio

10-19-2005, 11:50	#5 (permalink)
Aloservice Insane Poster Join Date: Sep 2005 Location: Brazil-Bahia-Salvador Age: 38 Posts: 69 Member: 179003 Status: Offline Thanks: 29 Thanked 8 Times in 5 Posts	I got one here with the same problem How can i solve this with cruiser??/ Any sugestion ???

10-26-2005, 01:52	#6 (permalink)
gsm4sp No Life Poster Join Date: May 2005 Age: 34 Posts: 516 Member: 143156 Status: Offline Thanks: 453 Thanked 96 Times in 57 Posts	This Solution Is Software 100%%% I Tested Mcu = Mod Reg

10-27-2005, 13:09	#7 (permalink)
.:Kuku:. No Life Poster Join Date: Mar 2005 Age: 30 Posts: 2,854 Member: 123133 Status: Offline Sonork: 100.999 Thanks: 218 Thanked 794 Times in 246 Posts	u are all wrong that is hardware problem we solved near about 20 sets with that faulty no need to flash.... no need to gdfs or other thing...solution is in hardware Br Kuku