T610 red light but no power on - GSM-Forum

opo · 06-05-2005, 19:47

I have this R7a t610 that don't power on. When put on charge red led starts and it stay on. I have flash with ufs using t610_125566_EU2_R7A011_RsaOff.bis and t610_125562_R7A011_Modem.bih but have not GDFS from R70 phone but old t610, from support page. all flash is ok. Have done flash on high speed and normal speed, with protecting SA zone, and after with writing SA from gdfs file. Phone does same thing.

I also try with DIV5.0 pached by Laser, using R1l files MCU+AVR and GRFS backup up with div. Now i have light on display, but phone don't start up...

I have rehoted Flash and CPU and Power suply....

What should i do next?? Best regards

Alkapone · 06-06-2005, 06:59

Pl's, if you can and interested in your phone repair, put it on Twister, press Charg On & Mon On. Post here last lines of result. Will try to help you.

B.R.
Alkapone

opo · 06-06-2005, 08:55

GDFS Open 0
GDFS_SRV State 2
GI: Camera driver version is: 200304224
GDFS: GDFS accesses restricted to process 55
GD: FlashCounter = 34
GDFS: GDFS accesses released
DSP.Revision = 0x23
MMM IMEI = 351252-00-191631-3
MMM state 0
MMM MM_SIM_DATA_SET_REQ
RR Multislot class GPRS = 8
RR state 0
Request_HSCSD_NT_ConfigParameters_Set 2
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 1499 bytes requested in total ****
LH: Connection established
** Before Read GD_TypeApproval_AudioTest **
** After Read GD_TypeApproval_AudioTest **

opo · 06-06-2005, 09:01

is doing some more readings... i have belive it end. I post new readings when done

here they are
0010FB90 :0000000
0010FBD0 :00D9FB10000000000000000000000000
0010FBE0 :00000000ECFB10000000000000000000
0010FBF0 :00000000000000FFFB1000000C30 :38FC1000000000000000000000000000
0010FC40 :0000004BFC1000000000000071FC1000000000
0010FC70 :00000000000000000000000080000000000000000
0010FCC0 :0000000000000000D0FC100000000000
:0000000000000000000042FD10000000
0010FD40 :000000000000000000000A1FD1000000000
0010FDA0 :000000000000000000000000B4FD1000
0010FDB0 :000000000000000000000000000000C7
0010FDC0 :FD100
0010FE00 :000000000000000000000013FE100000
0010FE10 :0000000000
0010FE50 :000000000000005FFE10000000000000
0010FE60 :0000000000000000000072FE10000000
0010FE70 :00000000000000000000000000000000000000
0010FEA0 :000000ABFE1000000000000000000000
0010FF00 :00000AFF100000000000000000000000
0010FF10 :000000030 :000000000000000000000043FF100000
0010FF40 :00000000000000F10000000
0010FFA0 :00000000000000000000000000B5FF10
0010FFB
IRAM End:
End of Crash Dump

Alkapone · 06-06-2005, 09:23

usualy D800, under camera and shield. Rehot it.

B.R.
Alkapone

zakirn · 06-06-2005, 09:37

mr opo use twister or ufs or tornado, use restore sa option use working backup files. 1000000000% your phone will be on.

opo · 06-06-2005, 11:44

@Alkapone ... thanks Goodfather
I have just rebaled D800...i mean the BGA under camera SEMC 5675-1, phone don't start yet, led goes on red....

@zakirn
i have restores SA from another phone, and Init Secblok...but nothing new

Alkapone · 06-06-2005, 12:32

Does phone writes same error on Twister?

B.R.
Alkapone

opo · 06-06-2005, 13:07

where is error in the first dump i write or in the second??

Alkapone · 06-06-2005, 15:48

** Before Read GD_TypeApproval_AudioTest **
** After Read GD_TypeApproval_AudioTest **

This is the error, that I repaired sucssesfully by D800 ...

B.R.
Alkapone

opo · 06-06-2005, 22:58

same thing
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 10841 bytes requested in total ****
GD: FlashCounter = 34
GD: FlashCounter was incremented. New FlashCounter = 42
GDFS: GDFS accesses released
MMM IMEI = 353989-00-354351-6
MMM state 0
MMM MM_SIM_DATA_SET_REQ
DSP.Revision = 0x23
RR Multislot class GPRS = 8
RR state 0
Request_HSCSD_NT_ConfigParameters_Set 2
** Before Read GD_TypeApproval_AudioTest **
** After Read GD_TypeApproval_AudioTest **

So you think i have to find another T610 and replace that D800??? cozz i already reball it....Should phone work without it??? Like t28 was working without Signal procesor???

BR

Alkapone · 06-07-2005, 06:52

Hm, that was the solution for ~7 mobiles at us with that kind of error, try to rehot N800, N660 (they are responssible for a sound). Maybe that will help, but as I see, your situation is a bit different.

B.R.
Alkapone

opo · 06-07-2005, 08:22

n660 where is it?? I don't have Sevice nual for t610??

Alkapone · 06-07-2005, 09:04

www.signalocentras.lt/t610.rar

B.R.
Alkapone

opo · 06-08-2005, 09:14

I had to return phone, but i am sure it gonna comme back, and then i will start changing...
I have another one, that i can full flash except Modem...there it gives me some error and so i canot flash it...same problem for 1 P900: all flash ok except modem
Modem Flash Writing Failed: M_Boot 0000
Error Break, Total Time: 00:56

06-05-2005, 19:47	#1 (permalink)
opo No Life Poster Join Date: Oct 2002 Location: Shenzhen China Age: 68 Posts: 1,074 Member: 16350 Status: Offline Sonork: 110823 Thanks Meter: 42	T610 red light but no power on I have this R7a t610 that don't power on. When put on charge red led starts and it stay on. I have flash with ufs using t610_125566_EU2_R7A011_RsaOff.bis and t610_125562_R7A011_Modem.bih but have not GDFS from R70 phone but old t610, from support page. all flash is ok. Have done flash on high speed and normal speed, with protecting SA zone, and after with writing SA from gdfs file. Phone does same thing. I also try with DIV5.0 pached by Laser, using R1l files MCU+AVR and GRFS backup up with div. Now i have light on display, but phone don't start up... I have rehoted Flash and CPU and Power suply.... What should i do next?? Best regards

06-06-2005, 08:55	#3 (permalink)
opo No Life Poster Join Date: Oct 2002 Location: Shenzhen China Age: 68 Posts: 1,074 Member: 16350 Status: Offline Sonork: 110823 Thanks Meter: 42	Here they are GDFS Open 0 GDFS_SRV State 2 GI: Camera driver version is: 200304224 GDFS: GDFS accesses restricted to process 55 GD: FlashCounter = 34 GDFS: GDFS accesses released DSP.Revision = 0x23 MMM IMEI = 351252-00-191631-3 MMM state 0 MMM MM_SIM_DATA_SET_REQ RR Multislot class GPRS = 8 RR state 0 Request_HSCSD_NT_ConfigParameters_Set 2 MALL: ** NEW MAXIMUM XRAM HEAP USAGE: 1499 bytes requested in total LH: Connection established Before Read GD_TypeApproval_AudioTest After Read GD_TypeApproval_AudioTest **

06-06-2005, 09:01	#4 (permalink)
opo No Life Poster Join Date: Oct 2002 Location: Shenzhen China Age: 68 Posts: 1,074 Member: 16350 Status: Offline Sonork: 110823 Thanks Meter: 42	is doing some more readings... i have belive it end. I post new readings when done here they are 0010FB90 :0000000 0010FBD0 :00D9FB10000000000000000000000000 0010FBE0 :00000000ECFB10000000000000000000 0010FBF0 :00000000000000FFFB1000000C30 :38FC1000000000000000000000000000 0010FC40 :0000004BFC1000000000000071FC1000000000 0010FC70 :00000000000000000000000080000000000000000 0010FCC0 :0000000000000000D0FC100000000000 :0000000000000000000042FD10000000 0010FD40 :000000000000000000000A1FD1000000000 0010FDA0 :000000000000000000000000B4FD1000 0010FDB0 :000000000000000000000000000000C7 0010FDC0 :FD100 0010FE00 :000000000000000000000013FE100000 0010FE10 :0000000000 0010FE50 :000000000000005FFE10000000000000 0010FE60 :0000000000000000000072FE10000000 0010FE70 :00000000000000000000000000000000000000 0010FEA0 :000000ABFE1000000000000000000000 0010FF00 :00000AFF100000000000000000000000 0010FF10 :000000030 :000000000000000000000043FF100000 0010FF40 :00000000000000F10000000 0010FFA0 :00000000000000000000000000B5FF10 0010FFB IRAM End: End of Crash Dump Last edited by opo; 06-06-2005 at 09:29.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
t610 charge ok but not power on	bakkougsm	Sony Ericsson Hardware Repair	3	04-25-2009 09:47
Help me ...! Sonyericssion T630 red light but no power on...	whiteclouds	HWK	0	05-16-2008 16:37
t610 red light but do not switch on	riaz ahmed	Sony Ericsson Hardware Repair	9	03-31-2008 07:33
k810...z610i...w810i...red light blingking when power on.	miguel_john1975	SETool2	0	03-07-2008 10:09
K800 Red light Blinking when power on..	bestncheap	MT-BOX	3	01-22-2007 14:12

06-06-2005, 06:59	#2 (permalink)
Alkapone No Life Poster Join Date: Dec 2002 Location: Lithuania Age: 40 Posts: 1,189 Member: 19265 Status: Offline Thanks Meter: 92	Pl's, if you can and interested in your phone repair, put it on Twister, press Charg On & Mon On. Post here last lines of result. Will try to help you. B.R. Alkapone

06-06-2005, 09:23	#5 (permalink)
Alkapone No Life Poster Join Date: Dec 2002 Location: Lithuania Age: 40 Posts: 1,189 Member: 19265 Status: Offline Thanks Meter: 92	usualy D800, under camera and shield. Rehot it. B.R. Alkapone

06-06-2005, 09:37	#6 (permalink)
zakirn Registered User Join Date: Nov 2001 Location: close to your mind Age: 53 Posts: 572 Member: 7457 Status: Offline Thanks Meter: 21	mr opo use twister or ufs or tornado, use restore sa option use working backup files. 1000000000% your phone will be on.

06-06-2005, 11:44	#7 (permalink)
opo No Life Poster Join Date: Oct 2002 Location: Shenzhen China Age: 68 Posts: 1,074 Member: 16350 Status: Offline Sonork: 110823 Thanks Meter: 42	@Alkapone ... thanks Goodfather I have just rebaled D800...i mean the BGA under camera SEMC 5675-1, phone don't start yet, led goes on red.... @zakirn i have restores SA from another phone, and Init Secblok...but nothing new

06-06-2005, 12:32	#8 (permalink)
Alkapone No Life Poster Join Date: Dec 2002 Location: Lithuania Age: 40 Posts: 1,189 Member: 19265 Status: Offline Thanks Meter: 92	Does phone writes same error on Twister? B.R. Alkapone

06-06-2005, 13:07	#9 (permalink)
opo No Life Poster Join Date: Oct 2002 Location: Shenzhen China Age: 68 Posts: 1,074 Member: 16350 Status: Offline Sonork: 110823 Thanks Meter: 42	where is error in the first dump i write or in the second??

06-06-2005, 15:48	#10 (permalink)
Alkapone No Life Poster Join Date: Dec 2002 Location: Lithuania Age: 40 Posts: 1,189 Member: 19265 Status: Offline Thanks Meter: 92	Before Read GD_TypeApproval_AudioTest After Read GD_TypeApproval_AudioTest This is the error, that I repaired sucssesfully by D800 ... B.R. Alkapone

06-06-2005, 22:58	#11 (permalink)
opo No Life Poster Join Date: Oct 2002 Location: Shenzhen China Age: 68 Posts: 1,074 Member: 16350 Status: Offline Sonork: 110823 Thanks Meter: 42	same thing MALL: ** NEW MAXIMUM XRAM HEAP USAGE: 10841 bytes requested in total GD: FlashCounter = 34 GD: FlashCounter was incremented. New FlashCounter = 42 GDFS: GDFS accesses released MMM IMEI = 353989-00-354351-6 MMM state 0 MMM MM_SIM_DATA_SET_REQ DSP.Revision = 0x23 RR Multislot class GPRS = 8 RR state 0 Request_HSCSD_NT_ConfigParameters_Set 2 Before Read GD_TypeApproval_AudioTest After Read GD_TypeApproval_AudioTest ** So you think i have to find another T610 and replace that D800??? cozz i already reball it....Should phone work without it??? Like t28 was working without Signal procesor??? BR

06-07-2005, 06:52	#12 (permalink)
Alkapone No Life Poster Join Date: Dec 2002 Location: Lithuania Age: 40 Posts: 1,189 Member: 19265 Status: Offline Thanks Meter: 92	Hm, that was the solution for ~7 mobiles at us with that kind of error, try to rehot N800, N660 (they are responssible for a sound). Maybe that will help, but as I see, your situation is a bit different. B.R. Alkapone

06-07-2005, 08:22	#13 (permalink)
opo No Life Poster Join Date: Oct 2002 Location: Shenzhen China Age: 68 Posts: 1,074 Member: 16350 Status: Offline Sonork: 110823 Thanks Meter: 42	n660 where is it?? I don't have Sevice nual for t610??

06-07-2005, 09:04	#14 (permalink)
Alkapone No Life Poster Join Date: Dec 2002 Location: Lithuania Age: 40 Posts: 1,189 Member: 19265 Status: Offline Thanks Meter: 92	www.signalocentras.lt/t610.rar B.R. Alkapone

06-08-2005, 09:14	#15 (permalink)
opo No Life Poster Join Date: Oct 2002 Location: Shenzhen China Age: 68 Posts: 1,074 Member: 16350 Status: Offline Sonork: 110823 Thanks Meter: 42	I had to return phone, but i am sure it gonna comme back, and then i will start changing... I have another one, that i can full flash except Modem...there it gives me some error and so i canot flash it...same problem for 1 P900: all flash ok except modem Modem Flash Writing Failed: M_Boot 0000 Error Break, Total Time: 00:56