U1 Satio tuch problem - GSM-Forum

microtel · 11-16-2010, 16:31

The phone is all new, but the tuchscreen is not working, its always pushing a right down corner, i replaced the tuchscreen with new one, but the problem still the same. Any idea?
ps i tried a many sw versions with setool and fabric updater but not helped!!!!

vandame25 · 11-17-2010, 03:47

have you tried the touch screen calibration?Also what provider and firmware you have?

microtel · 11-17-2010, 07:53

Explain me how to calibrate tuch if its not working, the phone is origninal, not branded but i tried with many firmwares orange, voda, t-mobile but a same s..t!

vandame25 · 11-18-2010, 02:16

Yours is pretty bad I had an issue with the orange firmware when i debranded to azn firmware all those anoying problems went away

vandame25 · 11-18-2010, 02:20

Also you can go to service menu and check everything press Red Green Red Red Green Red

vandame25 · 11-19-2010, 18:04

Alright i was changing my screen also and i got a bad digitizer it was sticking on lower right corner on exit, put mine in works also there is sticky stuff there to hold the digitizer in that's another issue without that digitizer does not get *** connection if i put pressure on the connection it works try to do that just a little pressure and see if anything changes

microtel · 11-20-2010, 00:05

Quote:

Originally Posted by vandame25

Also you can go to service menu and check everything press Red Green Red Red Green Red

This is not working forme, i can get in to a service menu but i cant do anything because if i tuch the screen it exits...

microtel · 11-20-2010, 00:07

Quote:

Originally Posted by vandame25

Alright i was changing my screen also and i got a bad digitizer it was sticking on lower right corner on exit, put mine in works also there is sticky stuff there to hold the digitizer in that's another issue without that digitizer does not get *** connection if i put pressure on the connection it works try to do that just a little pressure and see if anything changes

sorry but i dont understand you cristaly, what is digitizer for you?

vandame25 · 11-20-2010, 02:47

digitizer is a screen the one you replaced it has connection in the back 4 pins if those pins dont get good connection your screen does not work i pressed on the edge of the top right side and i can use the touch screen functions

vandame25 · 11-20-2010, 02:51

My cousin got a satio also i took off the front panel with the screen and installed it on my phone and everything started to work i didn't even want to give it back to her the problem is that screen suppose to stick really tight or you will get bad connection on ebay now they are selling front panel with the screen already together for 17.00 dollars im going to try it and see how it is

maro_boy · 02-08-2018, 03:49

i have the same problem i replaced the tuch screen but also the same .
help me !!!

11-16-2010, 16:31	#1 (permalink)
microtel Freak Poster Join Date: Nov 2003 Location: Vojvodina Age: 45 Posts: 358 Member: 44395 Status: Offline Thanks Meter: 7	U1 Satio tuch problem The phone is all new, but the tuchscreen is not working, its always pushing a right down corner, i replaced the tuchscreen with new one, but the problem still the same. Any idea? ps i tried a many sw versions with setool and fabric updater but not helped!!!!

11-17-2010, 07:53	#3 (permalink)
microtel Freak Poster Join Date: Nov 2003 Location: Vojvodina Age: 45 Posts: 358 Member: 44395 Status: Offline Thanks Meter: 7	Ui i tuch problem Explain me how to calibrate tuch if its not working, the phone is origninal, not branded but i tried with many firmwares orange, voda, t-mobile but a same s..t!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6150 Lock Problem	Zeljko	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-16-2013 08:16
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-18-2006 15:21
6110 5.47 sw unlock problem	gsms	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-21-1999 19:43
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44

11-17-2010, 03:47	#2 (permalink)
vandame25 Junior Member Join Date: Sep 2010 Posts: 30 Member: 1389083 Status: Offline Thanks Meter: 0	have you tried the touch screen calibration?Also what provider and firmware you have?

11-18-2010, 02:16	#4 (permalink)
vandame25 Junior Member Join Date: Sep 2010 Posts: 30 Member: 1389083 Status: Offline Thanks Meter: 0	Yours is pretty bad I had an issue with the orange firmware when i debranded to azn firmware all those anoying problems went away

11-18-2010, 02:20	#5 (permalink)
vandame25 Junior Member Join Date: Sep 2010 Posts: 30 Member: 1389083 Status: Offline Thanks Meter: 0	Also you can go to service menu and check everything press Red Green Red Red Green Red

11-19-2010, 18:04	#6 (permalink)
vandame25 Junior Member Join Date: Sep 2010 Posts: 30 Member: 1389083 Status: Offline Thanks Meter: 0	Alright i was changing my screen also and i got a bad digitizer it was sticking on lower right corner on exit, put mine in works also there is sticky stuff there to hold the digitizer in that's another issue without that digitizer does not get *** connection if i put pressure on the connection it works try to do that just a little pressure and see if anything changes

11-20-2010, 02:47	#9 (permalink)
vandame25 Junior Member Join Date: Sep 2010 Posts: 30 Member: 1389083 Status: Offline Thanks Meter: 0	digitizer is a screen the one you replaced it has connection in the back 4 pins if those pins dont get good connection your screen does not work i pressed on the edge of the top right side and i can use the touch screen functions

11-20-2010, 02:51	#10 (permalink)
vandame25 Junior Member Join Date: Sep 2010 Posts: 30 Member: 1389083 Status: Offline Thanks Meter: 0	My cousin got a satio also i took off the front panel with the screen and installed it on my phone and everything started to work i didn't even want to give it back to her the problem is that screen suppose to stick really tight or you will get bad connection on ebay now they are selling front panel with the screen already together for 17.00 dollars im going to try it and see how it is

02-08-2018, 03:49	#11 (permalink)
maro_boy Junior Member Join Date: Feb 2018 Posts: 3 Member: 2808862 Status: Offline Thanks Meter: 0	i have the same problem i replaced the tuch screen but also the same . help me !!!