W850i dismantle

[jazzcomms]

hi, seasonal greeting to all, does anyone know how to dismantle SE W810i. need pictures or instruction asap, thanks in advance
SORRY ABOUT MULTIPLE ENTRIES BUT SERVER SAID BUSY TRY LATER. DID'NT KNOW THAT IT HAD BEEN LISTED.

[squidgy45]

OK here we go!

First, slide the phone open. On the reverse side of the top u will see a metal plate, prise it off with a small screwdriver.

Next, remove the 2 T6 screws you can now see.

Then, remove the plastic front cover to expose the lcd screen.

Now close the slide, and u will see 2 more T6 screwws holding the top of the back on.

then remove the 2 T6 screws under the battery cover, and remove the back, there are 2 plastic clips also half way up the back.

open the slide again to lengthen the flex cable, and unplug it from the main pcb. then unplug the other end from the screen board (note the cable is also stuck to the board and casings so be careful not to tear it)!

from there on in its fairly obvious!

Regards, Steve.

[msa]

Originally Posted by squidgy45

OK here we go!

First, slide the phone open. On the reverse side of the top u will see a metal plate, prise it off with a small screwdriver.

Next, remove the 2 T6 screws you can now see.

Then, remove the plastic front cover to expose the lcd screen.

Now close the slide, and u will see 2 more T6 screwws holding the top of the back on.

then remove the 2 T6 screws under the battery cover, and remove the back, there are 2 plastic clips also half way up the back.

open the slide again to lengthen the flex cable, and unplug it from the main pcb. then unplug the other end from the screen board (note the cable is also stuck to the board and casings so be careful not to tear it)!

from there on in its fairly obvious!

Regards, Steve.

Thank you very much, you save me a lot of trouble .

br
msa

[yozzer]

http://www.formymobile.co.uk/Dismant...isassembly.htm