Z520i pin12 on connector repair help (charger pin) - GSM-Forum

ivanko33 · 07-28-2006, 13:54

I got a Z520i in for service, it can't charge and the official SE service center rejected it cause it's water damaged.
The problem is that a small drop made the pin12 platin disapear, but isn't there a point i can reconnect pin12 to somewhere on the board? any help is apreciated

Best Regards

ivanko33 · 07-28-2006, 14:06

please help me...................

zullu2004 · 09-26-2006, 17:06

same problem here . customer says that phone was droped on carpet
not charging (don't detect charger).
don't know what resistence to change.
on masure all ok.

masa2 · 10-04-2006, 23:47

do you have picture z520 not chage .

ivanko33 · 10-06-2006, 15:20

problem solved: bonding pad have been found deeper in the board. just gride...

07-28-2006, 13:54	#1 (permalink)
ivanko33 Junior Member Join Date: Feb 2005 Age: 42 Posts: 24 Member: 115723 Status: Offline Thanks Meter: 0	Z520i pin12 on connector repair help (charger pin) I got a Z520i in for service, it can't charge and the official SE service center rejected it cause it's water damaged. The problem is that a small drop made the pin12 platin disapear, but isn't there a point i can reconnect pin12 to somewhere on the board? any help is apreciated Best Regards

09-26-2006, 17:06	#3 (permalink)
zullu2004 No Life Poster Join Date: May 2005 Location: Timisoara Age: 43 Posts: 641 Member: 146635 Status: Offline Sonork: 100.1651273 Thanks Meter: 261	z520i not charging same problem here . customer says that phone was droped on carpet not charging (don't detect charger). don't know what resistence to change. on masure all ok.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
China Mobile Phone Connector 3.5mm (3 pin)	IPMART	ipmart WebShop	0	03-05-2010 13:20
China Mobile Phone Connector 3.5mm (4 pin)	IPMART	ipmart WebShop	0	03-05-2010 13:20
need advice on removing moto v8 charger connector	farry	RE-7500 Reworking System & iSolder	1	10-28-2009 11:15
K750i pin12 on connector repair help (charger pin)	SubTen	Sony Ericsson Hardware Repair	11	08-24-2006 23:17
Z520i auto on / off	ocean0	SonyEricsson (USB-Smart)	0	04-22-2006 13:34

07-28-2006, 14:06	#2 (permalink)
ivanko33 Junior Member Join Date: Feb 2005 Age: 42 Posts: 24 Member: 115723 Status: Offline Thanks Meter: 0	please help me...................

10-04-2006, 23:47	#4 (permalink)
masa2 Major Poster Join Date: Jan 2006 Posts: 43 Member: 226620 Status: Offline Thanks Meter: 1	do you have picture z520 not chage .

10-06-2006, 15:20	#5 (permalink)
ivanko33 Junior Member Join Date: Feb 2005 Age: 42 Posts: 24 Member: 115723 Status: Offline Thanks Meter: 0	problem solved: bonding pad have been found deeper in the board. just gride...