c261 after sucess write

[ahmertelecom]

c261 after sucessfully writing imei

Sending boot...OK
Software version: 0.1.66
Hardware version: MOTOROLA_E58S
Language pack: 11
Eeprom imei: 3594160058*********
Hardware IMEI: 3594160058*********
Manufacturer: Intel, Model: 28F128L30T
Writing new IMEI 359416005************x...OK
Turning phone off

phone show old imei what can i do i try 10 times same result

[GSM_Support]

Dear users,
We are pleased to introduce a new version of Smart-Clip v4.05, SmartMoto v3.06 and S-Card v2.05.

With this release we present the flowing options.

1. IMEI repair firmware patch via TestPoint for the models A1200, E2 and E6.
2. Network IMEI patch for the models C261, W370 and W375. Also, for the models C275, V175 and W377 (requires to be tested with the network).
3. Read info, using Smart-Clip connection, for the models A1200, E2 and E6 (E6 – firmware and language pack version only).
4. For better convenience, the Update process can be performed using either Update Mirror 1 or the Update Mirror 2. Please check the percentage scale and select the less loaded channel.

Update Smart-Clip first and perform S-Card update after that only.
We recommend to use only the latest versions of Smart-Clip, S-Card and SmartMoto.
If you wish to receive news on updates immediately, please subscribe to our new SMS notification system.


Smart-Clip ON!

IMEI section of SmartMoto service software was implemented by developer of this program for repair (original IMEI restore) purposes only!
For some models IMEI could be restored simply by connecting the handset to SmartMoto via Smart-Clip as for flashing.
Some models require to be flashed with “IMEI repair firmware patch”, only after that IMEI could be restored.
In some cases flash chip on phone’s PCB requires to be replaced, to allow user to restore IMEI.

However, every user that applies to this option must remember the original IMEI to be able to restore it. In any case if SmartMoto user,
during phone repair process, applies IMEI that differs from the original IMEI, which was previously set with the phone, is doing that on
his own responsibility.

Developer of SmartMoto software does not take any responsibility for any incorrect use of that program.



Best Regards
GSMServer team