C975 91i 0.6.3.6 : R245_U_82.21.91i UNLOCK FAILED WITH SCARD - GSM-Forum

cetech · 01-06-2007, 15:32

I tried to unlocked this c975 but failed with scard.

Here is the logs.

SmartMoto 2.11
S-Card: xxxxxxxxxx Smart-Clip dongle, v 1.07, assigned Smart-Clip: xxxxxxxxx Europe, initializing... OK
Clip serial: xxxxxxxxxx, version: 3.07, initializing... OK
Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.10
Switching to flash mode... OK [S Blank Rainbow POG]
Reading phone boot version... 3.10
Reading flash id... Micron - MT28F1284W18BET (x2)
Phone group: C975,C980,V980
Hardware IMEI: 3xxxxxxxxxx
WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching.
Reading security area... 2%"Prepare phone" operation failed
clip communication failed

The phone is dead.

PLS. HELP SUPPORT TEAM.

PLs. Help how to revived and unlocked sucessfully this phone.

TIA.

Amir-SkillZ · 01-06-2007, 16:31

For reviving now flash ur phone with same 91i flash in shx format (its Posted on Forum)
About Clip Communication Error..Check the Sticky Thread...its Becoz of Voltage Output of ur Smartclip

*MaTeOoSh* · 01-06-2007, 22:32

just DON'T connect phone in flashmode !

connect in normal mode, then set blank (untick autounlock) and then unlock via patch.

Tested on some pieces, everything went fine.

01-06-2007, 15:32	#1 (permalink)
cetech No Life Poster Join Date: Mar 2006 Location: Philippines Posts: 511 Member: 252201 Status: Offline Thanks Meter: 148	C975 91i 0.6.3.6 : R245_U_82.21.91i UNLOCK FAILED WITH SCARD I tried to unlocked this c975 but failed with scard. Here is the logs. SmartMoto 2.11 S-Card: xxxxxxxxxx Smart-Clip dongle, v 1.07, assigned Smart-Clip: xxxxxxxxx Europe, initializing... OK Clip serial: xxxxxxxxxx, version: 3.07, initializing... OK Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 3.10 Switching to flash mode... OK [S Blank Rainbow POG] Reading phone boot version... 3.10 Reading flash id... Micron - MT28F1284W18BET (x2) Phone group: C975,C980,V980 Hardware IMEI: 3xxxxxxxxxx WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching. Reading security area... 2%"Prepare phone" operation failed clip communication failed The phone is dead. PLS. HELP SUPPORT TEAM. PLs. Help how to revived and unlocked sucessfully this phone. TIA.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FREE Unlock, NO TESTPOINT, C975 R245_U_82.21.91I (0.6.3.6) using GOT_MOTO	gotsupport	GOT Motorola	308	08-25-2010 23:59
Succesfull unlocked C975 R245_U_82.21.91I (0.6.3.6)	::.::RAMJAN::.::	Motorola P2k	2	01-04-2007 00:09
c975 boot loader 6.3.6 sw version R245_U_82.21.91I	kenwood	Motorola P2k	53	08-13-2006 19:02
c975 0.6.3.6 r245_u_82.21.91i nead confirmation from S-C team	.:bono:.	Smart-Clip	1	06-16-2006 08:16
Unlock C975, boot 0.6.3.6, SW version R245_U_82.21.91I..?? HELP	ChingChing	Smart-Clip	6	05-31-2006 19:52

01-06-2007, 16:31	#2 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	For reviving now flash ur phone with same 91i flash in shx format (its Posted on Forum) About Clip Communication Error..Check the Sticky Thread...its Becoz of Voltage Output of ur Smartclip

01-06-2007, 22:32	#3 (permalink)
MaTeOoSh No Life Poster Join Date: Dec 2000 Location: gsmdoctor.pl Age: 48 Posts: 1,317 Member: 2755 Status: Offline Thanks Meter: 42	just DON'T connect phone in flashmode ! connect in normal mode, then set blank (untick autounlock) and then unlock via patch. Tested on some pieces, everything went fine.